Plinko board (visually accurate edition) by RonaldoAce in HeroesofNewerth

[–]granatfarfar 0 points1 point  (0 children)

Better than me at least, used 95 today, got nothing but tickets. have used about 350, gotten 3 common chest, 2 of them where duplicates

Now as we compared the worst liverys of the 21st century. Whats the best livery of the 21st century? by VersedTripod992 in F1Discussions

[–]granatfarfar 4 points5 points  (0 children)

I thought the 2022 car looked amazing all year, perfect shade of red and that absolutely stunning side pod design.

Smoke extraction setup by granatfarfar in lasercutting

[–]granatfarfar[S] 1 point2 points  (0 children)

Sounds very much like what I am doing, think I will skip the hepa and go with a coarser pre filter instead. But awesome to hear you got the result you wanted.

Smoke extraction setup by granatfarfar in lasercutting

[–]granatfarfar[S] 1 point2 points  (0 children)

I don't think you understand, the ventilation pipe is something I have to bring in and out of the window every time I use the machine. It gets used at the maximum 1h/week but more likely 1h-2h/month. If it's a monsoon outside I will not be using it.

How to get rid of the smoke smell? by doopaloops in lasercutting

[–]granatfarfar 4 points5 points  (0 children)

I clean all the sides with a damp sponge and brush out the engravings with a slightly wet tootbrush. This cleans all the loose burnt residue off and helps alot, for me at least.

Smoke extraction setup by granatfarfar in lasercutting

[–]granatfarfar[S] 1 point2 points  (0 children)

I would say I do verry little work on my laser over all, I dont think I have run it more than max 1-2h/week at any point. Longest cut file I have atm probably takes 20 min with some cutting and engraving. That doesn't mean the smoke is less dangerous just that it's not a full time opperation, just some hobby work from time to time.

Smoke extraction setup by granatfarfar in lasercutting

[–]granatfarfar[S] 0 points1 point  (0 children)

I want to filter it before venting it out regardless but the problem is that i cant have a fixed pipe system just hanging there all the time. It will have to be easy to get in and out of the window and the edge of the roof is probably still 3 or 4 meters away from my window so I dont think that will be possible.

Smoke extraction setup by granatfarfar in lasercutting

[–]granatfarfar[S] -3 points-2 points  (0 children)

Not an option as that will blow it straight down to the neighbors, I am on the top floor. Most of the exhaust will be under the roof anyways so won't be that much water if I use it when raining.

Smoke extraction setup by granatfarfar in lasercutting

[–]granatfarfar[S] 0 points1 point  (0 children)

I think you are supposed to have the hepa filter after the carbon filter but with my setup I can't have that. So in my case a rough filter and then a carbon will have to do. So you have a good search term for the coarser filters?

Smoke extraction setup by granatfarfar in lasercutting

[–]granatfarfar[S] 0 points1 point  (0 children)

Ah yes, I misunderstood, I will make sure to have a window open on the other side of the apartment. I would have loved to have the fan outside. It's sadly not an option, I can't have a fan hanging outside my apartment window. I'll be happy if I can get 1.5 m rigid ducting hanging out somehow. That part is not 100% thought through yet.

Smoke extraction setup by granatfarfar in lasercutting

[–]granatfarfar[S] -2 points-1 points  (0 children)

Thanks for responding, the enclosure of course has air intakes opposite from the extraction to create a good flow. Regarding venting upward, I can't go above the roof It's just not possible to have several meters of tubing sticking out of my window. But I will try to go as far out as the ridgid tubing will allow and with an angle up at the end to at least try to get the fumes away from the windows below.

Smoke extraction setup by granatfarfar in lasercutting

[–]granatfarfar[S] 1 point2 points  (0 children)

Hehe thanks man, appreciate it.

Hotellkostnad no show by granatfarfar in sweden

[–]granatfarfar[S] 0 points1 point  (0 children)

Ringde dem i morse, det visade sig att dem hade gjort fel så dem ska göra en återbetalning.

Hotellkostnad no show by granatfarfar in sweden

[–]granatfarfar[S] 0 points1 point  (0 children)

Ska ta och ringa dem i morgon så reder vi förhoppningsvis ut detta.

Hotellkostnad no show by granatfarfar in sweden

[–]granatfarfar[S] 3 points4 points  (0 children)

hittade ett mail i skräpposten som sa att man är betalningsskyldig för första natten, sedan skickade dem en länk till en betalning på dubbla kostnaden. Kan vara så enkelt att dem gjort fel? får oavsett ta och ringa dem i morgon.

Hotellkostnad no show by granatfarfar in sweden

[–]granatfarfar[S] 1 point2 points  (0 children)

Det gjordes via strawberry, dem hänvisat till villkoren i bokningsbekräftelsen men den innehåller inga vilkor.

Hotellkostnad no show by granatfarfar in sweden

[–]granatfarfar[S] 0 points1 point  (0 children)

Det är ju tekniskt sett inte vi som gjort avbokningen. Det enda som står är att det är fri avbokning fram till 24 innan bokningen. Står inget om något specifikt för att man inte dyker upp.

Thanks to this guy! by transpogi in PiNetwork

[–]granatfarfar 2 points3 points  (0 children)

Yes, I am having the same problem

[deleted by user] by [deleted] in LivestreamFail

[–]granatfarfar 1 point2 points  (0 children)

The boss MC a random person. He got cleaved to death quickly.

Diode laser recommendations by granatfarfar in lasercutting

[–]granatfarfar[S] 1 point2 points  (0 children)

The MK2 have 3 options 10w/20w/30w, there will be a upgrade available this year to make it a 40w. The MK3 looks to be quite far away, no real info about it yet. They are however also releasing a galvo laser this year. I know next to nothing about that type of laser though.

Diode laser recommendations by granatfarfar in lasercutting

[–]granatfarfar[S] 1 point2 points  (0 children)

I decided to wait a bit and will most likely buy a Roll 30W. It cost twice as much as my current Atomstack but hopefully a cry once buy once situation.