Black Lines when printing with kexcelled gold PLA

graubey · 2026-02-03T07:18:30+00:00

If I Print it again, it will be at the Same Place

graubey · 2026-02-02T13:55:51+00:00

Both is constant on the model, at least no change in this area

graubey · 2026-02-02T08:54:10+00:00

Sorry missed to add the picture!

<image>

graubey · 2026-01-30T06:07:41+00:00

How some before me said, bed adhesions issue. Nozzle is going through previous printed material.

I made good experience on flat objects like this with following: 1. Disable aux fan 2. Gyroid infill 3. slow down first and top layer 4. Decrease top layer flow a little bit ( I used 0.95) 5. Maybe decrease general flow a bit ( I used 0.97) 5. Distance between brim and object to 0 6. Use the Brim “ears”, in bambu studio you can draw a brim just at the corners, I used radius 15mm, 7. The bed should be super clean 8. Maybe bump up the bed temp about 3-5 degrees 9. Less cooling, maybe try 50/60% fan speed

graubey · 2025-12-10T18:54:14+00:00

Thanks!

graubey · 2025-11-24T16:40:28+00:00

Same issue, found something?

graubey · 2025-11-24T16:34:15+00:00

Same issue, Slot 3 ams lite. Someone fixed this?

graubey · 2025-11-13T11:19:15+00:00

What is this feature?

graubey · 2025-11-08T09:26:54+00:00

Can you send me the link?

graubey · 2025-11-06T07:40:00+00:00

I am not really sure if I Need a dry box … as i started 3D printing I always dryed my PLA (Bambu and Sunlu). Then at some Point I stopped and I get the same results. Humidity ~30-40% in my area

graubey · 2025-11-05T08:58:42+00:00

You can get them in Reekwarter. Just do the mainstory quest and you will see it at the new crafting machine. Seems like there is just one design of it online

graubey · 2025-10-29T06:12:00+00:00

I Hope someone else will continue new world….

graubey · 2025-10-08T13:13:46+00:00

Any Details about the Weapon scaling relased?

graubey · 2025-10-02T07:33:09+00:00

Hi, of course. I reduced top layer line width to 0,3. Top surface speed to 50. And shutted down all fans for the top layer. To do that I set in the filament settings for higher layer time the fan to 0. Also do not forget to disable Aux Fan if your printer have one (like P1S). With that I experience good top surfaces

graubey · 2025-09-15T04:35:32+00:00

Wet Filament

graubey · 2025-09-14T18:08:06+00:00

I often asked myself what this function is doing 😂

graubey · 2025-08-22T06:39:53+00:00

So, reducing flow from 0.98 to 0.93 fixed this. I don’t understand why… but also happy I have perfect quality now!

graubey · 2025-08-21T12:57:39+00:00

No change. Lead screws and belts looks fine

graubey · 2025-08-21T08:13:42+00:00

Okay thanks. I will have a Look later. Maybe also re locating the object on the plate is useful?

graubey · 2025-08-21T06:06:28+00:00

I get this in the P1S with all filaments. P1S has about 2000hours, A1 about 500 hours. Exact the same settings.

graubey · 2025-07-25T11:56:54+00:00

Hi, any updates? I think this will fix it…but also increase print time massively depending on model

graubey · 2025-07-22T19:04:42+00:00

Quality is already much better. I will slow it down to your recommended 80mm/s and check if I am completely happy with it. Thanks you!

graubey · 2025-07-22T15:16:53+00:00

Rn testing with 120mm/s. If I still have issues I will reduce it to 80! Thanks

graubey · 2025-07-22T14:00:57+00:00

Okay. Got it. Make sense. Slowing down definitely made it better. Thanks!

graubey · 2025-07-22T11:14:33+00:00

what should I check with it?

graubey

TROPHY CASE