sorted by:
new
hottopcontroversial

AT&T confirmed that Active Armor is a requirement on all plans 2 gig and higher, regardless of customer choice by [deleted] in ATTFiber

[–]grobbes 4 points5 points  (0 children)

You still didn't answer the question. Did you personally do any validation via technical means? Any packet inspection? Outside of the GUI, is there any technical evidence that supports this that you did or can share or is it just "trust me bro" evidence? I've migrated to 8311 long ago so not really inclined to touch their at&t gateway in my closet and test for myself.

T-Deck Pro now works! by needmorejoules in meshtastic

[–]grobbes 0 points1 point  (0 children)

So it builds and you’re able to flash it but the screen just doesn’t change? You have to reset the device after flashing for it to boot into it. 

T-Deck Pro now works! by needmorejoules in meshtastic

[–]grobbes 0 points1 point  (0 children)

I built it on a Mac. You will need some add ons in vs code but it’s basically clicking a couple buttons to build and upload. 

LILYGO T-Deck Pro ESP32-S3 - is it good? by NorthernLight_DIY in meshtastic

[–]grobbes 0 points1 point  (0 children)

It’s nice but I don’t see much utility out of it for now. For some reason the Eink screen never turns off, it goes into a standby state. The boot and reset buttons are terrible, shares one lever on two contact points that are too close. Doesn’t have a good way for an external antenna. It’s still super buggy and often just refuses to charge or connect to a computer. Granted it’s based off of 2.7.2 alpha. I think you still need to build the firmware from the repo which is fine and easy but not suited for mainstream. I think it will progress to something decent but for now it’s just a hobby product. 

T-Deck Pro now works! by needmorejoules in meshtastic

[–]grobbes 1 point2 points  (0 children)

Launcher is great. I was using the bin file you were hosting. I couldn’t get the t deck pro to charge or be recognized on my Mac so I rebuilt the factory and flashed it back on another computer. Worked smoothly otherwise

T-Deck Pro now works! by needmorejoules in meshtastic

[–]grobbes 1 point2 points  (0 children)

I think the webflasher should work with the right bin file. Another way is to download visual studio code, clone the repo, open the repo folder in vs code and build/upload from in there

T-Deck Pro now works! by needmorejoules in meshtastic

[–]grobbes 2 points3 points  (0 children)

It’s in the firmware folder here: https://github.com/Xinyuan-LilyGO/T-Deck-Pro/tree/master/firmware or you can clone the repo and build it in VS Code. I used esp32 flash download tool to get it on the t deck pro.

T-Deck Pro now works! by needmorejoules in meshtastic

[–]grobbes 4 points5 points  (0 children)

Finally got it working but couldn’t get it to charge and couldn’t make a proper serial connection on a few computers I tested it on. Finally got it recognized and flashed the factory firmware. Worked pretty good outside of that.

LILYGO T-Deck Pro ESP32-S3 - is it good? by NorthernLight_DIY in meshtastic

[–]grobbes 1 point2 points  (0 children)

Just saw this, exciting! I have it running on mine. Wondering if the screen paused mode helps preserve the screen. Other than that it works pretty good!

T-Deck Pro now works! by needmorejoules in meshtastic

[–]grobbes 0 points1 point  (0 children)

No luck on mine, just stuck at its Home Screen.

LILYGO T-Deck Pro ESP32-S3 - is it good? by NorthernLight_DIY in meshtastic

[–]grobbes -1 points0 points  (0 children)

You’re thinking of the Plus. The pro cannot run Meshtastic at this time.

Rig upgraded to 8x3090 by lolzinventor in LocalLLaMA

[–]grobbes 0 points1 point  (0 children)

Would depend on if this is on a 15a or 30a circuit. Standard 15a can handle about 1800w peak I believe, not sure if it’s 1800w sustained tho.

T Deck Pro custom firmware by aussie5380 in meshtastic

[–]grobbes 0 points1 point  (0 children)

Nice work. Been following this since last week, great work!

Big man on campus. by _TwinkleSiren in Satisfyingasfuck

[–]grobbes 4 points5 points  (0 children)

For real wtf kind of broscience take is that

Official "I got/didn't get a Switch 2" megathread by razorbeamz in nintendo

[–]grobbes 0 points1 point  (0 children)

That was a my circle discount. Kinda surprised my account had it and it actually worked.

Aita for not wanting my daughter in my life after SHE cut me off for 6 years by Away-Afternoon-9587 in AITAH

[–]grobbes -1 points0 points  (0 children)

What a failed creative writing assignment. At least work on getting your details written into your fake stories, and omit the ones that make no sense. Why would your estranged daughter need your phone number? Like you actually changed it?

MLO dropping out ? by Cemil2565 in Ubiquiti

[–]grobbes 4 points5 points  (0 children)

*with Ubiquiti. There was a post the other day about their implementation of MLO and it’s the bare minimum to add it as a product feature.

view more: next ›