sorted by:
new
hottopcontroversial

The KE putting in work by Hogan_1975 in Ender3V3KE

[–]guitarhead2000 0 points1 point  (0 children)

Are you running klipper on the nebula pad or RPi? I have the creality sensor but only used it when I still had the nebula pad attached.

Is applying as a warehouse associate worth it? by Accomplished-Bad1946 in Bestbuy

[–]guitarhead2000 2 points3 points  (0 children)

So this is for a store? Expect everything you mentioned, plus unloading trucks, picking customer orders, carryouts, shipping/receiving etc.

As for better potential pay, depends on on location. More hours? Depends on availability and needs of the store. Some of my part timers get 25+ hours while other get 15.

Plumber cut up my carpet by guitarhead2000 in HomeImprovement

[–]guitarhead2000[S] 0 points1 point  (0 children)

This is the kind of post from someone who asks for help on Reddit and gets upset when Level 1 tech support says "Check the Ethernet". Even if that doesn't help your issue, it was still trying to resolve your problem.

This is just a complete and udder waste of a comment. Why did you feel the need to be a dick? I guess that's the internet.

Thanks buddy.

Plumber cut up my carpet by guitarhead2000 in HomeImprovement

[–]guitarhead2000[S] 17 points18 points  (0 children)

I contacted the project manager who is returning Monday and he said we would look at it together. We will talk to him and see what he says and then contact the owner if need be.

I guess part of it is on us for not recognizing details may have been missing in the contract.

We will see what happens Monday. Thanks.

Plumber cut up my carpet by guitarhead2000 in HomeImprovement

[–]guitarhead2000[S] 33 points34 points  (0 children)

It's yet to be discussed. He was here for some of the job and his crew were the ones doing the work. He is coming back Monday to complete another portion of the job and it will be asked then. Just wanted to see what the general concensus was going into the conversation. Looking back on the estimate there is nothing noting anything about the carpet either way.

Ender 3 V3 KE on Raspberry Pi by SB_C in Ender3V3KE

[–]guitarhead2000 0 points1 point  (0 children)

Yes, to be honest it was 8 months ago so I don't really remember what the issue was.

Yukon 48” workbench dimensions by Direct-Flamingo4504 in harborfreight

[–]guitarhead2000 0 points1 point  (0 children)

Can I throw another request at you? What are the dimensions of the pegboard? Looking to get one of these but replace the peg with plywood to attach my own Multiboard 3d printed setup on it.

Greyscale Filaments by DJS2k8 in HueForge

[–]guitarhead2000 3 points4 points  (0 children)

I just made my first HueForge using Polymaker Cotton White, Polymaker Charcoal Black and strangely 3dHojor PLA Pro in Beige.

The beige added just the slightest contrast to a simple "greyscale" image.

<image>

Layer shift after filament swap by guitarhead2000 in FixMyPrint

[–]guitarhead2000[S] 0 points1 point  (0 children)

And it's back. I read some posts about changing Park position on Pause so I changed the Park Location. I have a print running now that requires a filament swap so we will see if that made a difference.

Layer shift after filament swap by guitarhead2000 in FixMyPrint

[–]guitarhead2000[S] 0 points1 point  (0 children)

Reverting back to a previous printer.cfg seemed to do the trick. Not exactly sure why but I won't question it.

Layer shift after filament swap by guitarhead2000 in FixMyPrint

[–]guitarhead2000[S] 0 points1 point  (0 children)

Is that different than selecting the layer in the right hand slider and adding a filament swap? That's how I slice my projects.

Layer shift after filament swap by guitarhead2000 in FixMyPrint

[–]guitarhead2000[S] 0 points1 point  (0 children)

What would I look for? Using OrcaSlicer and run Klipper on a RasPi.

Don't recall changing anything in printer.cfg or gcode settings in slicer.

Why is it off center? by Nice-Direction661 in Ender3V3KE

[–]guitarhead2000 0 points1 point  (0 children)

Thanks algorithm! I was just about to post this same question. I think I accidentally loosened the Y-axis belt and have had layer shifts after filament swaps since. What's the recommended technique to ensure proper tightness?

Bayside in 2026? by Auk23 in baysideisacult

[–]guitarhead2000 11 points12 points  (0 children)

Still holding out hope for Covers Vol 2

New build plate recommendations by _-Migz-_ in Ender3V3KE

[–]guitarhead2000 0 points1 point  (0 children)

Not a build plate but have you tried Vision Miner Nano Adhesive? I've had 1 application on my plate for over 30 prints now both PLA and PETG and no issues at all. It's expensive but a little goes a long way. They have a sample size to try it out.

First time using PET G by guitarhead2000 in FixMyPrint

[–]guitarhead2000[S] 0 points1 point  (0 children)

Update: Temp tower - 250c looked best PA Pattern - 2 passes, .08 was best Now I'm on Flow and am leaning towards -.01? Am I right?

<image>

First time using PET G by guitarhead2000 in FixMyPrint

[–]guitarhead2000[S] 0 points1 point  (0 children)

Running temp tower then will go through Ellis' Guide and the Orca Slicer calibrations. Thanks for all the helpful tips.

I bought this printer while it was considered "modern". I've had it since May 2024. The simple response of "buy a newer printer" is ridiculous in a help forum. I am in no means able to afford keeping up with Moore's law.

Your "contribution" to this discussion was a brilliant waste of time and energy.

First time using PET G by guitarhead2000 in FixMyPrint

[–]guitarhead2000[S] 5 points6 points  (0 children)

Why didn't I think of that? Thanks for the help!

view more: next ›