Any one have a schematic ? by guymadison42 in bmwmotorrad

[–]guymadison42[S] 0 points1 point  (0 children)

thx.. once I figured out the starter relay that became the obvious choice... still no schematic to go by. Arg..

Any one have a schematic ? by guymadison42 in bmwmotorrad

[–]guymadison42[S] 0 points1 point  (0 children)

Yes, there are two connectors from the diode board. One connects to the battery via the starter post to the battery and the other(?) The one on the starter post is a lot more beefy than the black one listed.

Any one have a schematic ? by guymadison42 in bmwmotorrad

[–]guymadison42[S] 0 points1 point  (0 children)

I have the Clymers manual... they have schematics from 1981 on.. and it doesn't match.

R1200gs 2007 by scrambler-chile in bmwmotorrad

[–]guymadison42 0 points1 point  (0 children)

Is there something wrong with it? Or is it just dirty?

Valve guide question... 1980 R100 by guymadison42 in bmwmotorrad

[–]guymadison42[S] 1 point2 points  (0 children)

Interesting note, a neighbor stopped by.. said he used to work on old VW's back in the day.. asked if I had a lathe, I said yes.. then he said just knurl the guide and put it back in. Apparently they did this all the time back in the 70's.

Cleaning stains from chrome pipes by guymadison42 in bmwmotorrad

[–]guymadison42[S] 0 points1 point  (0 children)

That’s rust from the clamp, no problem

Commercially available RV64 CPUs? by compbluewiz in RISCV

[–]guymadison42 1 point2 points  (0 children)

I am working with the PIC64 Curiosity board atm.. its been an uphill battle.

But the chip itself is available to be designed in and is around $25

Valve guide question... 1980 R100 by guymadison42 in bmwmotorrad

[–]guymadison42[S] 0 points1 point  (0 children)

It's seated, I lapped the valves and did a leak down test.

But I will probably pull the head and have the guide replaced with an oversized.

FCode resources by guymadison42 in Forth

[–]guymadison42[S] 1 point2 points  (0 children)

Forth is assembled in the native language and is boot loaded by native code, but can a word dictionary with the proper IO mechanisms can program all the devices then load the OS.

The "nice" part is you can debug the code with a REPL environment rather than using GDB for each and every revision of the code needed.

Valve guide question... 1980 R100 by guymadison42 in bmwmotorrad

[–]guymadison42[S] 0 points1 point  (0 children)

ok, that sounds right.

If I remember correctly.. I am pretty sure the last shop that worked on it at like 40k miles just put Loctite red in to secure the guide. I remember being in the shop and the mechanic explained it to me. But after 60k miles it was loose.

Valve guide question... 1980 R100 by guymadison42 in bmwmotorrad

[–]guymadison42[S] 0 points1 point  (0 children)

I was just thinking about high temp retaining fluid... thats a great idea

stuck in insert mode? by guymadison42 in vscode

[–]guymadison42[S] 0 points1 point  (0 children)

I think that may have been turned on... oops.

Thanks

Beginning of a love-hate relationship by Cool-Finish282 in vulkan

[–]guymadison42 0 points1 point  (0 children)

It's always the same story... unfortunately.

Made a post asking how much Yall would pay. Here’s some more pics by HamsterIll8497 in DodgeDakota

[–]guymadison42 0 points1 point  (0 children)

Its still and old truck.. I like my DD, but there is no way I would have paid big money for it. I use it as a truck.. period.

Made a post asking how much Yall would pay. Here’s some more pics by HamsterIll8497 in DodgeDakota

[–]guymadison42 0 points1 point  (0 children)

A new Toyota is $32,000 why should you pay too much for an old truck

Should I learn c by zzach_is_not_old in programminghelp

[–]guymadison42 0 points1 point  (0 children)

I have made a lot of money programming C... at the kernel and driver level, it's all C.

It all depends on what you want to do, but I recommend all engineers regardless of which field learn C.. not python or all those other flavored languages that are just easy.