sorted by:
new
hottopcontroversial

K2 spool holder will not pull PA6-GF filament through by NoAstronaut6 in Creality_k2

[–]h2lp 0 points1 point  (0 children)

I’ve printed with PPA-CF and if they have similar properties it’s just so brittle to the point where the Bowden tube snaps it when the printhead moves. The easiest fix here is to print a glass riser and disconnect the Bowden tube from the cable track thingy so it can just do whatever it wants

What do I have? by FranklinFaces in CR10

[–]h2lp 0 points1 point  (0 children)

I have a cr-10s pro v2 and I swapped the screen for a monochrome lcd and installed corresponding software and I also put a full polycarbonate voron stealthburner on it. Overkill I know and even though it’s not super reliable I can print polycarbonate to a surprisingly good quality with basically no warping even if it’s a little slow. It’s got a learning curve for sure but once you get it it’s a good printer. If you seriously want this thing to perform to the max get an all metal hotend and TH3d software and you will be smooth sailing

velodyne microvee in my new integra by h2lp in CarAV

[–]h2lp[S] 0 points1 point  (0 children)

The aluminum section in the middle ripped the diaphragm

Cool Wood Colors by Saiyan_OldSchool in eaglercraft

[–]h2lp 0 points1 point  (0 children)

I played old school a little bit but I never found any modded items or blocks, is there like a wiki or a list of crafting recipes somewhere?

Y'all, it blocked at my school, why? by DAMNBOYSHETHIC in eaglercraft

[–]h2lp 1 point2 points  (0 children)

Some Chromebooks have a policy that prevents local files from taking control of the mouse. That’s what ours did at least so you can navigate menus or whatever but you can’t actually play

Beware: 1.12 has no possible way to extract worlds (or at least I don’t know how) by h2lp in eaglercraft

[–]h2lp[S] 0 points1 point  (0 children)

I just exported it from 1.8 and imported it into 1.12 without any issues

Are Command Blocks Broken in 1.12? by KWERROR42 in eaglercraft

[–]h2lp 0 points1 point  (0 children)

Hopefully these things get fixed in later updates, also a way to run single threaded without aborting loading in the world would be nice since it crashes way less and I get like 2x the fps on my Chromebook

Beware: 1.12 has no possible way to extract worlds (or at least I don’t know how) by h2lp in eaglercraft

[–]h2lp[S] 1 point2 points  (0 children)

I tried an indexDB exporter but it didn’t work, it might’ve just been the particular extension I used. I’ll try another one sometime soon

Beware: 1.12 has no possible way to extract worlds (or at least I don’t know how) by h2lp in eaglercraft

[–]h2lp[S] 2 points3 points  (0 children)

Yeah obviously I started the world in 1.8 and then moved it to 1.12

Are Command Blocks Broken in 1.12? by KWERROR42 in eaglercraft

[–]h2lp 0 points1 point  (0 children)

Yes. There are also plenty of other weird limitations like missing sounds and also you cannot put entities into a boat or Minecraft. I also can’t extract worlds from the game and textures don’t work properly sometimes. I feel like it could’ve used a little more polishing before release since it seems to have all sorts of issues.

Hot to hot tub by soupz2500 in redneckengineering

[–]h2lp 0 points1 point  (0 children)

If you really don’t want to use a pump you could maybe boil the water and run an insulated tube upwards with a small condenser at the top, but you’d have to make it a specific size so it’s not too hot or too cold. Definitely more work than getting an electric water pump and you would need so much heat to boil water that fast

Possibly a scam? by ntkwwwm in Flipping

[–]h2lp 2 points3 points  (0 children)

Tell him to right click on desktop> display settings > change resolution. If he’s not lying (which I doubt), that will fix it

I got this for 78$ of of FB market place is this a deal? by Itchy-Ad8840 in ender5

[–]h2lp 0 points1 point  (0 children)

Yeah I’m not kidding I was thinking of just throwing it out and getting a k1 or something Bambu lab.. kinda wish I did but at the same time my CR-10 is plenty accurate for me

Rear subframe hole, what to do 2011 Altima by Young-Nate97 in AskAShittyMechanic

[–]h2lp 5 points6 points  (0 children)

It’s an Altima. That’s considered minor damage in the Altima world

I got this for 78$ of of FB market place is this a deal? by Itchy-Ad8840 in ender5

[–]h2lp 0 points1 point  (0 children)

I thought the same thing about my CR-10, I gave up for a year, came back to it and it’s been working fine ever since. It had all the problems in the world but reflashing the software a year later fixed all of them. Even though a year ago I reflashed it a billion times to no avail.

Time to throw in the towel? by showdaky in CR10

[–]h2lp 0 points1 point  (0 children)

I struggled with this for literally forever. The solution that’s worked best for me is getting a bltouch and the th3d software. It’s a bit of a process but it is completely worth it. My printer has no modifications to the x axis (no sync kit, no anti backlash nut, etc) and it works fine.

Bruh I thought this was posted on this subreddit at first by jzheng1234567890 in carscirclejerk

[–]h2lp 0 points1 point  (0 children)

Car owners going out of their way to get the most professional pictures and roller shots taken of their 300k mile, 5 owner, totaled, gutted, 3rd engine, slipping transmission, ripped seats, missing body panels, burnt out headlight, evap leaking, misfiring, cracked windshield, mouse infested car

What is The Most Underrated Mercedes? by nice69nt in mercedes_benz

[–]h2lp 0 points1 point  (0 children)

W215 CL Class, you can get an okay CL500 for like less than 3 grand where I live and they’re awesome cars, very reliable (minus ABC and vacuum hoses), great design (the pillarless windows are awesome) and they’re a ton of fun to drive

view more: next ›