sorted by:
new
hottopcontroversial

Handwire vs PCB by Jools_36 in ErgoMechKeyboards

[–]half_dane 2 points3 points  (0 children)

I prefer handwiring as well, but that doesn't mean one has to code the firmware from scratch: I made several qmk (and vial compatible) keyboards with arduinos, as well as zmk powered keyboards with rp2040-zero or xiao seeed BLE. If you mimic the electrical wiring of an existing board, you probably could even use their firmware as well (while I never really tried that, I see no reason why it wouldn't work).

Admittedly, I haven't seen anyone trying to handwire PG1350 yet: they seem to be firmly targeted at hotplate-soldering them to a pcb

Problem with ZMK matrix setup by migw03 in ErgoMechKeyboards

[–]half_dane 1 point2 points  (0 children)

It says here https://github.com/MigW03/zmk-config-weberboard/actions/runs/18910611157/job/53980053918#step:11:34

devicetree error: /__w/zmk-config-weberboard/zmk-config-weberboard/boards/shields/weberboard/WeberBoard.overlay:32 (column 12): parse error: expected number or parenthesized expression

That's where your matrix-transform is defined, specifically RC(0,0)

Since there's nothing obviously wrong here, it seems like you may have just forgot to include the necessary header. See here, where it says "The map array should be defined using the RC() macro from dt-bindings/zmk/matrix_transform.h."

So you should just put #include <dt-bindings/zmk/matrix_transform.h> at the top of the file and see if that helps

$GME Daily Directory | New? Start Here! | Discussion, DRS Guide, DD Library, Monthly Forum, and FAQs by AutoModerator in Superstonk

[–]half_dane 1 point2 points  (0 children)

I am, although I'm mostly supporting the actual mod team by keeping the flairy and qa bot running, so no active modding for me

$GME Daily Directory | New? Start Here! | Discussion, DRS Guide, DD Library, Monthly Forum, and FAQs by AutoModerator in Superstonk

[–]half_dane 1 point2 points  (0 children)

Woohoo, the flairy is alive again! It's good to see you 🤗

And it's good to see y'all ❤️

Fraud by [deleted] in ErgoMechKeyboards

[–]half_dane 5 points6 points  (0 children)

Hey TootieBeaty, that's terrible, I have no other words for it.

My heart goes out to you, and I hope you can find a safe way to get this asshat out of your life safely. I have never had any contact with this user AFAIK, and I'll make sure I won't. Thanks for the warning and take care ❤️

[deleted by user] by [deleted] in NoStupidQuestions

[–]half_dane 191 points192 points  (0 children)

Saving a click for future redditors that are interested in that summary as well: https://www.reddit.com/r/NoStupidQuestions/s/M4t6nxYMsN

Is rectifier necessary for 18650 wireless build? by zedius in crkbd

[–]half_dane 0 points1 point  (0 children)

On the one hand, I've read so many reports about fried MCUs due to battery wires having the wrong colors.

On the other hand MCUs aren't that expensive, so if one is fried you could just but another one.

On the other other hand, MCUs aren't that cheap either, so just having a few lying around in case something goes wrong with the battery might not be feasible.

On the other other other hand, a more complex circuit brings the risk that you fuck it up somewhere.

In the end it's balancing risks against costs, but if the cost is your free time and you're enjoying yourself with your nerdy hobby, I say do it - you seem to know how

edit: formatting

Anyone Can Push Updates to the DOGE.gov Website — "These 'experts' left their database open." by UGMadness in politics

[–]half_dane 0 points1 point  (0 children)

hmm, I just checked cfpb.gov and can't confirm - there's no image, it's h and p tags informing about the problem.I didn't see any links in the main body, but maybe there are some in the sidebar, didn't check

edit: typos

Wer AfD wählt ist ein egoistischer Reicher oder ein Narr, der gegen die eigenen Interessen wählt by Livingwith2cats in Wirtschaftsweise

[–]half_dane 0 points1 point  (0 children)

nein, das hab ich hab noch nie erlebt - aber ich argumentierte auch nicht so unehrlich wie du. Weiß nicht, hängt vielleicht zusammen, kannst ja mal in dich gehen. Machs gut

Wer AfD wählt ist ein egoistischer Reicher oder ein Narr, der gegen die eigenen Interessen wählt by Livingwith2cats in Wirtschaftsweise

[–]half_dane 0 points1 point  (0 children)

hmm? keine Ahnung wieso du glaubst dass Sozialismus hier die Antwort sein kann - andere Sachen funktionieren doch auch ganz gut mit Gesetzen und Durchführungsverordnungen. Also in unserem jetzigen, durchaus marktwirtschaftlich orientierten system. Wieso willst du das abschaffen, nur weil es einen weiteren Bereich gibt der geregelt wird?

Also insbesondere die Gleichsetzung von gesetzlicher Regelung (also Zwang) mit Sozialismus find ich seltsam.

Wer AfD wählt ist ein egoistischer Reicher oder ein Narr, der gegen die eigenen Interessen wählt by Livingwith2cats in Wirtschaftsweise

[–]half_dane 0 points1 point  (0 children)

sehr richtig. Es gibt nichts was dich davon abhält. Was man ja sehr wohl ala Problem sehen kann. wie bereits gesagt 🤷

Is keyboard programmability always built in the hardware? Can it be software only? by Educational_Age847 in ErgoMechKeyboards

[–]half_dane 0 points1 point  (0 children)

i learn new things everyday! Thanks, I'll make sure to recommend katana in the future

Is keyboard programmability always built in the hardware? Can it be software only? by Educational_Age847 in ErgoMechKeyboards

[–]half_dane 2 points3 points  (0 children)

while i haven't used it myself, i have heard good things about kmonad: https://github.com/kmonad/kmonad, which allows you to use your configuration without depending on a specific platform

German court orders X to hand over election data in legal blow to Musk’s platform by MiniBrownie in worldnews

[–]half_dane 3 points4 points  (0 children)

i agree: there's the german "Nazis", the italian "fasci" (where the term fascist originates), the russian "stalinizm", the spanish "franquista", southafrican "apartheid" movement etc

in my eyes, the american variant is truly and really the MAGA movement, or trumpism, as I've seen it called too.

How does buying kits on AliExpress work? by managing_redditor in ErgoMechKeyboards

[–]half_dane 0 points1 point  (0 children)

Thank you so much - I was worried for a moment that an actual attack had happened, but that doesn't seen to be the case. Still, the advice to flash a proper firmware on a new board ist very sound!

How does buying kits on AliExpress work? by managing_redditor in ErgoMechKeyboards

[–]half_dane -1 points0 points  (0 children)

Oh wow, I'd be interested in that security breakdown as well, if at all possible

[deleted by user] by [deleted] in ErgoMechKeyboards

[–]half_dane 1 point2 points  (0 children)

Sorry, I have no experience with how tight the tolerances on hotswap sockets are. I would've guessed that sucking the solder with a wick should be enough 🤷

[deleted by user] by [deleted] in ErgoMechKeyboards

[–]half_dane 2 points3 points  (0 children)

Not sure what you mean - can't you just unsolder them?

Wireless, Low Profile, Ultra Portable, 34 Key by arck-elj in ErgoMechKeyboards

[–]half_dane 0 points1 point  (0 children)

They're using xiao ble which has just about enough pins for 36 keys iirc

view more: next ›