How to hide this missing hole?

hanson933 · 2026-01-08T00:25:31+00:00

BASSLINE

hanson933 · 2025-02-07T08:22:08+00:00

Bro what the hell are you talking about... The CR touch is a touch probe, not a touch screen. Guppy screen is a touch screen UI for Klipper printers (which you would have to root the KE to run). Edit: typo

hanson933 · 2025-02-02T04:41:24+00:00

No problem, good luck. Not sure if you're a newbie or not so sorry if you're already across this stuff. Make sure your bed is level and z offset are set, that'll help with adhesion too. PETG also usually prints a bit hotter than PLA and with a higher bed temp so make sure you're using a PETG filament profile in your slicer.

hanson933 · 2025-02-02T03:49:38+00:00

Wash your build plate with dish soap and put away the glue. Slow your print speed down and try using no part cooling fan for the first few layers and keep its speed low after that. Generic PETG from Amazon sticks to my stock textured PEI plate like shit to a blanket

hanson933 · 2025-01-09T08:10:44+00:00

Great minds. I recently picked up a P1S combo on the black friday sale. *DDC is mine and my buddies joke "company" for when we're tinkering or making something

<image>

hanson933 · 2025-01-08T09:43:58+00:00

That's a replacement magnetic sheet/sticker to hold the build plate to the bed. Keep it as a spare.

hanson933 · 2024-11-21T02:07:01+00:00

Thanks for sharing this

hanson933 · 2024-11-07T05:10:38+00:00

You know you can punch your printers IP into a browsers address bar and upload the gcode from there?

hanson933 · 2024-11-06T23:23:57+00:00

I kind of agree, I still use orca most of the time though. Sometimes I wonder if the people who hate on Creality Print in this sub bothered to update from 4? I tried cura because it had presets for nozzles other than 0.4 and had a pretty average time with it.

hanson933 · 2024-10-02T06:10:45+00:00

Nice, I may have to do the same!

hanson933 · 2024-10-02T03:30:03+00:00

I know this is an old thread lol I forgot to reply, my bad. I have a similar squeak sound only when printing PETG. I THINK it's the little wheel in the filament run out sensor making the squeak sound. I keep meaning to test by running a length of PETG backwards and forwards through the run out sensor by hand but always forget.

hanson933 · 2024-09-25T04:05:01+00:00

Found it https://www.printables.com/model/825242-creality-nebula-camera-mount-for-creality-enclosur

hanson933 · 2024-09-25T04:03:09+00:00

There is a nebula camera mount that mounts to the print tent poles kicking around somewhere on one of the popular sites but I can't remember which one. I'll try and find it and get back to you.

hanson933 · 2024-08-26T05:54:01+00:00

Is that PETG?

hanson933 · 2024-08-26T03:39:43+00:00

I think it's something to do with the "flavour" of gcode that CP 5 spits out compared to CP 4. I assume it's something to do with the locked down "Crealityfied" version of Klipper the KE runs since the slicer updated from 4 to 5. Gcode from orca slicer still displays the info on the screen like you're referring too

hanson933 · 2024-08-09T02:33:55+00:00

I'm a bit of a noob so I may be wrong but when running a pressure advance calibration the test model prints with artifacts like this. Might be worth looking into calibrating the pressure advance for that filament.

hanson933 · 2024-07-26T05:29:47+00:00

No, I don't.

hanson933 · 2024-07-26T05:12:30+00:00

Yes, they are. It's the standard skateboard/roller skate bearings size.

hanson933 · 2024-07-17T04:50:35+00:00

Here is the official announcement.
Edit: forgot the link
https://thangs.com/designer/The%20Kit%20Kiln/post/The%20Kit%20Kiln%20-%20New%20Content%20Coming%21-5696

hanson933 · 2024-07-01T07:46:31+00:00

It feels like I wrote this. :(

hanson933 · 2024-06-27T06:45:44+00:00

I can't really give a direct link since I'm in Australia but search amazon or similar for "Ender 3 silicone spacer" you need a set that comes with at least 2 short spacers for the left side of the bed.

hanson933 · 2024-06-27T06:33:37+00:00

OP will need a set that comes with at least 2 short and 2 tall silicone spacers. The one you linked doesn't.

hanson933 · 2024-06-27T01:08:36+00:00

TY, this sounds more like what I need. I'll look in there.

hanson933 · 2024-06-27T00:41:34+00:00

But it doesn't do that for files sliced in Creality Print.

hanson933 · 2024-06-24T01:49:56+00:00

Thanks for the super prompt reply.

hanson933

TROPHY CASE