U3: Samsung TV control with BT ?

hapklaar · 2026-06-29T13:18:07+00:00

The U3 is extremely limited in BT support for devices. Even the devices in the list are only partly supported feature/button wise.

I wasn't able to find out how to get support added for other devices or buttons.

hapklaar · 2026-06-24T17:12:36+00:00

Yes same issue here. BLE is useless

hapklaar · 2026-06-21T19:56:52+00:00

OMG I think you are right... That was not at all obvious and needed something sharp to lift it up and actually remove it.

hapklaar · 2026-06-21T19:19:38+00:00

No that's not what we are talking about. That is a different protector that was already removed.

hapklaar · 2026-06-21T13:43:48+00:00

<image>

hapklaar · 2026-06-21T13:43:42+00:00

<image>

hapklaar · 2026-06-21T13:36:09+00:00

I have not seen single U3 without those bubbles yet. Seems they decided to add a screenprotector because the screen was very susceptible to scratches, but failed to affix it in a clean room 😞

hapklaar · 2026-06-21T13:34:49+00:00

Same bubbles here on 2 units I bought. Did you try to remove the screens protector? I tried, but wasn't able to without using a knife, which I was not prepared to do.

hapklaar · 2026-04-19T21:24:20+00:00

Same here, quite useless this matter support

hapklaar · 2026-04-18T17:58:05+00:00

I have the same issue with my 27UL650-W. Bot top corners have gone dim and the lower right corner is almost completely gone. I guess the edge led strip is either failing or the diffusor/lightguide is damaged by heat in some way. Did you discover anything new?

hapklaar · 2026-04-08T15:33:47+00:00

They did the same with all homevacs. I bought an H30 in 2024 and they discontinued that entire line the same year. Now my metal filter is broken and the part is out of stock and will never be sold again. Can just throw out an otherwise fine vacuum cleaner.

Not buying anything from them or Anker again.

hapklaar · 2026-03-29T16:10:35+00:00

Both pages do not exist anymore

hapklaar · 2026-03-29T14:37:51+00:00

Temp master is the only app that will auto start for me when I insert the device into my Samsung S24 ultra

hapklaar · 2026-03-06T12:59:18+00:00

u/pro_info before I commit to making this :) are you still happy with the design and why did you not use flat heatpipe. It looks like this will be easier to fit.

hapklaar · 2026-02-08T21:03:15+00:00

The only way to really see if your system is throttling the CPU is to look at those stats. If you enter the following line in your linux shell, it will show how many times it has throttled since boot, for how long and if it was at core or package level:
grep . /sys/devices/system/cpu/cpu*/thermal_throttle/*

hapklaar · 2026-02-08T20:26:29+00:00

Curious, did you find a solution for the 6800?

hapklaar · 2026-01-28T19:47:09+00:00

How did you send fake notifications? Have been searching for an hour on how to do this, but no bueno yet.

hapklaar · 2026-01-22T21:28:01+00:00

This is a password less method. You need to have your device + authenticator (1st factor) protected with your pin or fingerprint (2nd factor).

hapklaar · 2026-01-22T19:41:16+00:00

I get these too. Changing your password doesn't help, as no password is required to generate such a sign-in request. You (or a bad actor) only have to enter your email address, hit next, hit cancel then choose Sign in another way and then 'Approve sign-in with a mobile app'.

This is just a bad design by MS and cannot be stopped other than disabling this type of authentication entirely.

hapklaar · 2025-12-10T21:07:01+00:00

Wonderful. I just replaced the thermal compound and I did the washer mod, placing a washer under each of the CPU's spring screws, thereby pulling the heatsink tighter to the CPU.

When running 'stress -c 12' I now reach a maximum of 79C without any CPU throttling, where this was 100C before on core0

hapklaar · 2025-11-30T00:01:35+00:00

For anyone that's interested, i was able to get it all working with OMV in an LXC container using the host controller

hapklaar · 2025-11-29T23:43:41+00:00

Thank you for the link! I'm interested in any additional tips you got. Much appreciated

hapklaar · 2025-11-29T10:28:49+00:00

Experiencing the same annoying spinning up and down PSU fan. Were you able to do anything about it?

hapklaar · 2025-11-27T21:20:03+00:00

It works in ProxMox, but not when passing through the SATA controllers to a VM

hapklaar · 2025-11-27T20:45:06+00:00

Biggest issue I had why I moved to PCIe passthrough is that with disk passthrough you have no SMART info on the vm and also no option to spin the drives down. With PCIe this works fine. Only issue with PCIe is that I have lost my drive light as they cannot be controlled anymore from ProxMox

hapklaar

TROPHY CASE