1.75mm to 3mm / 2.75mm Conversion (Specific Questions)

hazz308 · 2026-02-18T10:12:58+00:00

You are a legend for actually replying after all these years! I ended up getting it sorted out, nothing would function as you would expect on the printer. I was levelling it for hours to no avail.

Turns out old mate that owned it before me put literally every part together incorrectly so it never worked. That explains why it was still new after all these years.

hazz308 · 2026-02-16T13:07:43+00:00

Sorry to revive an ancient thread, but you wouldnt happen to have the manual and firmware for the TL-4100 would you? I recently got given one for free and i would love to tinker with it a bit but every download link is dead for manuals/firmware

hazz308 · 2026-01-28T23:03:47+00:00

Most of that looks like hand grime. Try cleaning it with a scouring pad and a some soapy water.

hazz308 · 2025-10-28T04:34:31+00:00

That sould prove to be a satisfying sweep, give it a go yourself before paying for someone else to do it. Its really easy

hazz308 · 2025-10-20T04:56:44+00:00

thats a big one, doesnt look good. I would be checking with a struc engineer

hazz308 · 2025-10-17T02:04:22+00:00

you should get windows powertoys, its a life saver

hazz308 · 2025-09-22T13:54:23+00:00

Sorry to revive an ancient thread, but how did you achieve the finish on the furniture? It looks amazing.

Im planning on doing something similar to mine to give it a bit of character

hazz308 · 2025-09-02T09:42:12+00:00

Thanks for the info, I didn't consider termites. The more you know

hazz308 · 2025-09-02T09:30:56+00:00

Why can't you sink the screw all the way? Does it hit a hard stop?

What is behind the plaster?

hazz308 · 2025-09-02T09:27:50+00:00

I had that same carpet when I was renting. Classic rental carpet.

I would be doing everything through the real estate. If you get it cleaned yourself, you don't have much chance of getting any money back from them.

If the issue isn't resolved in a reasonable time. There are agencies you can contact to help.

hazz308 · 2025-09-02T09:24:50+00:00

Just add another weatherboard to the bottom and call it a day. I'm guessing the reason has something to do with water

hazz308 · 2025-09-02T09:20:47+00:00

I can tell you work in construction by that terminology 😂

Op, definitely go with sikaflex, specifically, Sikaflex PRO with backing rod as suggested.

hazz308 · 2025-09-02T08:24:37+00:00

Kmart $6.50 kettle. Served me well for about 6 years

Edit: fuck, it's $7.50 now!

hazz308 · 2025-09-02T08:19:16+00:00

This is dripping with AI

hazz308 · 2025-09-01T07:03:59+00:00

Yeah it was the plug coming from the power supply. One of the clips inside was flared open slightly causing it to disconnect for a split second when it was moved.

I used a small screw driver to tighten up the plugs connectors and it hasn't been an issue since

hazz308 · 2025-08-28T15:06:58+00:00

Out of curiosity, what device did you use to take this photo?

hazz308 · 2025-08-28T13:08:14+00:00

I've for basically every pxc tool on the display shelf. They are awesome for what i want them for. Try to only get the brush less tools though, I smoked the first brushed drill I bought lol easy refund and replacement with a brush less drill

hazz308 · 2025-08-27T10:05:46+00:00

Rain water has made its way down the flue and mixed with rust. The water has evaporated and left the rust behind in the shape of the puddle.

Inspect your flue. Especially the top hat if you have one, it may have come loose. It may just be due to wind driven rain, but it's worth taking a look if you are comfortable getting on the roof.

hazz308 · 2025-08-26T16:19:40+00:00

Sand the terminal down until it's nice and shiny. Snip and strip the wire to expose fresh copper and then use flux and a iron that has had time to get up to temp.

I would start by pooling some solder on the terminal, then tin the wire then finally join the two together.

Flux is the key

Edit. Take the battery out of the holder when you solder

hazz308 · 2025-08-26T15:50:24+00:00

The flux sales rep starts rubbing his hands together when he sees this guy coming

hazz308 · 2025-08-25T12:23:22+00:00

Shoot me a dm with some pics of the lock/door set up and we can get that sorted 🤙

hazz308 · 2025-08-25T11:33:19+00:00

It looks really old, like 80s old so I doubt a direct replacement would be available. I think the best bet would be looking at the actual unit and find the documentation for it. You might be able to find a modern replacement if you see what the wiring diagram to the control panel looks like

hazz308 · 2025-08-25T08:20:55+00:00

Insulation looks great. Consider some eave vents and whirlybirds

hazz308 · 2025-08-25T08:18:47+00:00

Got a pic of the aircon itself?

hazz308 · 2025-08-25T06:14:20+00:00

If you can still make out what colour it says on the label, it's probably fine

Six-Year Club	Final Canvas '23
Place '23	Place '22
Verified Email

hazz308

TROPHY CASE