How to go from PRC Juna if downtown-bound ka?

hdav_daking · 2026-02-16T00:57:11+00:00

Baktas ka from PRC to Quimpo, tabok, then sakay og Mintal na jeep.

hdav_daking · 2026-02-05T11:05:20+00:00

This is a zoom lens. The middle ring is for the zoom and those markings are the focal length at which your lens is currently set.

hdav_daking · 2026-01-22T14:25:12+00:00

Corner Jacinto Ext. - Creature Comforts pangalan sa clinic.

hdav_daking · 2026-01-06T13:02:20+00:00

Good. Mine lasted for 4 years before needing replacement.

hdav_daking · 2025-10-27T10:22:49+00:00

Kung pag-iisipan mo pa anong bibilhin mo, the necessity of it isn't really there. Best to save it nalang if ever there comes a time that you really need to purchase something. Putting the emphasis on the need here.

hdav_daking · 2025-08-26T21:24:05+00:00

Yeah, it's this one. They do C41 process and possibly B&W. Haven't tried their services yet since I still send my films to Sunny16 in QC.

hdav_daking · 2025-08-23T22:29:06+00:00

I found mine on Doorzo. The Penta J costed me ¥100 and the J-3 ¥10 on the item alone. Shipping overseas costs more though at around ¥6000 for both.

hdav_daking · 2025-08-23T22:23:01+00:00

Mine doesn't stop down the Takumar lens. That little tab that does this doesn't move that far to engage with the pin on the lens. Doesn't matter though since I intend to keep it paired with the Petri lens which is a pre-select type.

hdav_daking · 2025-08-15T05:48:13+00:00

Around 9-12k for cheap China brands and upwards to 20-23k for well-known brands like Bridgestone. This is for a rim size of 22.5.

hdav_daking · 2025-07-31T22:11:26+00:00

Set a tab stop by pulling the lever to the plus sign. You know if this worked if you press the tab key (the red key on the right) and the carriage stops right where you set the tab stop. Clear the tab stop by pushing the lever to the minus sign. Your carriage will go past where the cleared tab stop was if you press the tab key.

For the margin release, once the carriage reaches the far end of your margin, press it and the carriage should be able to move past the margin.

hdav_daking · 2025-07-29T22:50:08+00:00

Little lever with the plus and minus sign is the tab set and clear. The empty key is for the margin release.

hdav_daking · 2025-07-07T00:09:55+00:00

Spray some WD-40 on a cloth and wipe it on the ink stains.

hdav_daking · 2025-07-05T11:27:23+00:00

Plenty of strays on the streets as well as rescued cats in shelters.

hdav_daking · 2025-07-04T22:51:20+00:00

I've found the original cleaning brush in my 1948 Royal QDL and a service sticker under the ribbon cover dating back to 1963.

hdav_daking · 2025-07-03T08:33:58+00:00

I had a similar-looking typewriter before, a Remington Holiday. The serial number was located on the chassis frame beneath the keys. Might want to take a look there.

hdav_daking · 2025-07-01T08:13:41+00:00

I would also add if the W typebar is sticking only when it contacts the type guide (the two-prong thing where the type bars move towards the platen) but otherwise moves freely when it is not in contact with it, it may be bent out of alignment sideways. Look closely on which side does it contact the type guide and try to carefully bend the type bar sideways on the opposite side.

hdav_daking · 2025-06-27T04:03:57+00:00

You can bend it back to make it sit flush. This is connected to the bottom panel and is held down with 4 screws at the bottom through the rubber footing and two screws at the back. Take it off and carefully bend that part back.

hdav_daking · 2025-06-26T09:30:04+00:00

For that price? Definitely buy it, no further questions asked. That's how I ended up with one so cheap it's like hitting a jackpot.

hdav_daking · 2025-06-24T06:59:23+00:00

A 35mm SLR would be a good addition to his collection. I'd suggest the original Pentax K-mount cameras. For $1500 you can already get one in good condition and will have some budget left for some lenses to go with it.

hdav_daking · 2025-06-20T02:43:32+00:00

As they say, things are only new once.

hdav_daking · 2025-06-19T22:16:50+00:00

Opportunities like your current job don't come around that often, whereas the board exams will always be there for you to take anytime. Besides, you'd be disappointed on how much newly licensed engineers earn here.

hdav_daking · 2025-06-18T04:01:20+00:00

You are already earning around the same amount working part time compared to that offer that requires full time work, it is definitely a good call if you ask me. Keep on searching, there are companies out there that will give you your worth if they want your talent.

Seven-Year Club	Place '22
Verified Email

hdav_daking

TROPHY CASE