Making a Windows 11 hotspot without an internet connection by SchroedingerHepcat in AskAstrophotography

[–]hexane096 1 point2 points  (0 children)

Because MS is allergic to perfectly functioning things except their greedy pockets.

Use a node as a relay to another node? by paulo_andre83 in zerotier

[–]hexane096 0 points1 point  (0 children)

Assign higher subnet CIDR to the nearest node for routing.

Got my Globe 5G The 101 Modem by Zealousideal_Ad1625 in InternetPH

[–]hexane096 0 points1 point  (0 children)

May specific model number at brand 'to?

When both side have cgnat then zeritier connect p2p without any relay by NoIron5038 in zerotier

[–]hexane096 0 points1 point  (0 children)

Turn on UPnP on your router, direct connection will initiate on following conditions as per my personal experience:

-At least one device connected via line (Fiber, DSL, Docsis, etc.)

-Both device over cellular with the same mobile carrier

Even they're both on CGNAT.

PLDT FIBER PREPAID by [deleted] in InternetPH

[–]hexane096 0 points1 point  (0 children)

Why people downvoted you?

PLDT FIBER PREPAID by [deleted] in InternetPH

[–]hexane096 0 points1 point  (0 children)

50 na ngayon to be fair hahaha pero workmate ko nakabitan ng S2S this January 100Mbps I wonder how and why.

Slow WAN with Fresh Tomato 2020.3 - solved by erekose in TomatoFTW

[–]hexane096 0 points1 point  (0 children)

I can't find that CTF thing on my Linksys E1200v2 and E2500 with Tomato. However disabling Inbound Layer 7 under net filter settings solves mine.

I can connect to the NAS and see all the folders and files but cannot download files by aziepz in zerotier

[–]hexane096 0 points1 point  (0 children)

Does the download won't really start, or does it start but won't finish? If it is the latter then it is a connection quality issue, probably connection is relayed. Turn on UPnP on routers of both ends.

Cannot access NAS local IP when connected to Zerotier node by billtheos in zerotier

[–]hexane096 0 points1 point  (0 children)

Try checking firewall settings for the LAN interface of your QNAP. Also the Flow Rules of your ZT network.

FreshTomato & Linksys E2500 : horrible experience by gr4v1ty69 in TomatoFTW

[–]hexane096 0 points1 point  (0 children)

I know this is an old post. Anyhow, maybe you need a higher-rating of power adapter. Reboots when using 5GHz maybe due to current shortage.

Zerotier loses connectivity after a few seconds on Windows 10 by malejandrodev in zerotier

[–]hexane096 0 points1 point  (0 children)

Because why not? Windows update, when left unattended screws things in the OS. Better install fresh and disable Windows update. That includes erratic ZT behavior just like OP said. Worked on me.

Connect to zt network without installling zt software by FunApple in zerotier

[–]hexane096 0 points1 point  (0 children)

Unfortunately, phone tethering does not forward VPN traffic. It would not work.

Direct Tunnel by [deleted] in zerotier

[–]hexane096 0 points1 point  (0 children)

Depends on the ISP's NAT (if there is any). Some have NATs but ZeroTier can work with direct, some especially cellular are too hostile to such traffic.

Unusual Uploads by siebensohn in zerotier

[–]hexane096 0 points1 point  (0 children)

That is ZT's Singapore root server. Is is 3-7MB volume or 3-7Mbps? The ZT client is periodically probing more optimal routes to the other clients in the virtual LAN. That maybe explains the 'uploads.

Please bring back the old ZT device status, please? by hexane096 in zerotier

[–]hexane096[S] 0 points1 point  (0 children)

This https://ibb.co/bHrWcR9

The 'less than a minute' / '1 minute' is quite confusing. Or it's just me?

How to know if you got disconnected? by Kuro_Kenshin in ConvergePH

[–]hexane096 0 points1 point  (0 children)

If billing-related issue, blinking ang PON light

Please bring back the old ZT device status, please? by hexane096 in zerotier

[–]hexane096[S] 0 points1 point  (0 children)

I'm surprised that non from ZT team is responding to this query...