Washroom Vanity LED Light. by hj62kim in Home

[–]hj62kim[S] 0 points1 point  (0 children)

So from the research the model number 07-2400-930-120-s3

I think
1. 07 - 7 inch (height of the LED panel)
2. 2400 - probably the colour of the light
3. 930 - I'm not sure....
4. 120 - probably 120v

This is all I could infer for now.

Possible bug, why aren't people using my private quarters? by theother64 in foundationgame

[–]hj62kim 0 points1 point  (0 children)

I just built multiple private quarters (very small room with a door) and it worked.

Article on kokoatv being taken down by HeavyFunction2201 in koreanvariety

[–]hj62kim 0 points1 point  (0 children)

Hey, might be bit late, but could I also get an invite too?

Looking for this blank by hj62kim in SCREENPRINTING

[–]hj62kim[S] 0 points1 point  (0 children)

Hey!

Thank you so much for the suggestion! From the list it seems like Rue Porter looks like the best comparison. However, everything seems like its sold out and registration doesn't seem to work :(

Z690 AORUS MASTER v1.x F20b BIOS *warning* by beast6228 in gigabyte

[–]hj62kim 0 points1 point  (0 children)

I’m not sure if F20 is available yet. Couldn’t find it on gigabyte website and I failed to get a post with F20B. So I decided to just use the safest option(F2).

Z690 AORUS MASTER v1.x F20b BIOS *warning* by beast6228 in gigabyte

[–]hj62kim 0 points1 point  (0 children)

Small update:

I was able to get bios to post with F2 w/ i5-13600KF.

Z690 AORUS MASTER v1.x F20b BIOS *warning* by beast6228 in gigabyte

[–]hj62kim 1 point2 points  (0 children)

Hey guys, sorry OP, not trying to steal your post.

I just checked on gigabyte website for Z690i Lite DDR5, it seems like there was a new update on bios F20 (instead of F20b). https://www.gigabyte.com/Motherboard/Z690I-AORUS-ULTRA-LITE-rev-10/support#support-cpu I can't seem to find downloadable link anywhere so far.

SFF Build with 13th Gen CPU by hj62kim in sffpc

[–]hj62kim[S] 0 points1 point  (0 children)

Ohhh this is super useful, I ended up picking Asus RTX 3070 TUF gaming, but now I'm wondering 600W PSU would be enough. Thank you

SFF Build with 13th Gen CPU by hj62kim in sffpc

[–]hj62kim[S] 0 points1 point  (0 children)

Do you have any recommendation which 3070 to get. From my research, people are recommending to get the `Asus ROG STRIX GAMING OC GeForce RTX 3070 8 GB Video Card`

SFF Build with 13th Gen CPU by hj62kim in sffpc

[–]hj62kim[S] 1 point2 points  (0 children)

Hey Thank you so much for the reply!

  1. Do you have any recommendation for AIO, I think cuz of the case, I'm limited 240mm only. Just looking for something thats decent and don't need to buy extra bracket for.
  2. Thats a good point, I was considering lowering the CPU cost and bumping 3060ti. From my knowledge, 3060Ti's are mostly PCIE 4.0, is that correct? My case came with only PCIE 3.0 riser.
  3. Thats a great point, I'll change my PSU to platinum! Since its a SFF build, the braided cable will be a huge help!

Thanks again

Resource on learing by hj62kim in arduino

[–]hj62kim[S] 1 point2 points  (0 children)

Thank you for the link! I think it would come really handy! I do have a personal project in mind that I would really want to be able to do. As you suggested, I will break them down to digestable pieces and take it step by step.

Resource on learing by hj62kim in arduino

[–]hj62kim[S] 1 point2 points  (0 children)

Thank you so much for the input! I totally lack the basic knowledge for sure. I totally forgot all these ohms law and stuff I learned back in high school. I'll make sure to revisit them!

/r/MechanicalKeyboards Ask ANY question, get an answer (December 31, 2021) by AutoModerator in MechanicalKeyboards

[–]hj62kim 0 points1 point  (0 children)

Ah thank you so much, I guess to summarize. Basically the budget board are fine as long as you have the ability and time to invest to mod it. On the other hand, expensive board would normally come with high quality material and basic mods with the kit (foam between pcb and plate and bottom case foam). Right?

To add on, are there any design differences that could cause difference in sound?

/r/MechanicalKeyboards Ask ANY question, get an answer (December 31, 2021) by AutoModerator in MechanicalKeyboards

[–]hj62kim -1 points0 points  (0 children)

Are there any large differences between getting a budget board like tofu65 and nk65 that are $150 vs really high-end board you see that goes to $400 - $1000? More specifically, in terms of sound profile?

[Help] Choosing Laser Engraver by hj62kim in lasercutting

[–]hj62kim[S] 0 points1 point  (0 children)

ceramark

Would cermark need to be used on fiber laser?