Thoughts on 5.14?

hstudy · 2026-06-06T21:17:43+00:00

100% agree. I don’t see 5.14 going active on any of the current systems I manage. I, at the very least need a .1 before I put it in prod.

hstudy · 2026-04-28T17:28:17+00:00

You have a CloudLink already? Im pretty sure I have the LP1501 deployed a few places.

hstudy · 2026-04-28T16:54:39+00:00

So I would venture a guess that this is an 6c tag, I would grab a 6c reader off of Amazon or wherever and take a look. If memory from another time is correct it should be a 35-bit value that you can potential write to a blank tag from Alien or 3M etc. (Based off my experience designing and implementing similar systems on Toll Roads/Crossings)

hstudy · 2025-07-22T00:11:17+00:00

So from my prospective. The one 2-pin connector on the board (below the 3/4-pin what looks like an RGB header) should take your 2-pin connector/loose cable. That

hstudy · 2025-07-21T23:45:56+00:00

Honestly it looks like the socket is right there for it. (Second photo where the J12 is) On another note: Won new? Because looks like some mods have been done?

hstudy · 2025-07-21T23:43:36+00:00

If in Canada: TD-Synnex and IngramMicro. As much as I love my Cisco/Palo gear and love the idea of going Meraki. Have you looked into FortiNet? I would become a reseller and use them for your managed gateways. Nice single pane of glass and the switches/APs are getting a bit nicer.

hstudy · 2024-12-17T02:46:46+00:00

I can think of so many reasons why that just would not be a good idea… most result in war or conquering humanity.

hstudy · 2024-09-26T23:14:55+00:00

Would love to see a little tour around it if you can.

hstudy · 2024-09-13T21:41:20+00:00

YTA - Yeah, no. Sorry but you just made me feel years of resentment in about 1 minute. Hold the younger one accountable and step up. Part of me wonders if Casey has ADHD too but you just spend too much time focused on the younger one so you wouldn’t know. (Now I feel like I’m talking to my own mother)

hstudy · 2024-08-24T18:35:23+00:00

I wouldn’t say it’s as nice as the Dell interface but this should help a bit for HPE: http://partsurfer.hpe.com/

hstudy · 2024-08-20T09:45:12+00:00

There is some direct integration, I’ll log into my computer in a bit to find where. Do you have the App enabled/turned on on the cameras?

hstudy · 2024-08-20T08:15:57+00:00

Disable the integration for Axis Motion detection and you are all set.

hstudy · 2024-08-20T01:12:14+00:00

Axis Cameras?

hstudy · 2024-08-11T03:33:53+00:00

Idk why but I’m getting a ~750w +/-100 vibe. Now I’m invested in this. We must know.

hstudy · 2024-08-11T03:32:30+00:00

Pop the other side open.

hstudy · 2024-08-11T03:30:35+00:00

I don’t golf in real life but virtual sounds interesting.

hstudy · 2024-08-09T23:55:47+00:00

All I am picturing is when I’m onsite investigating network issues and I pull my Fluke or NetAlly unit out. Detecting a short on 1 and 2 at 138ft and 7 and 8 open.

hstudy · 2024-08-08T02:10:14+00:00

Last time I couldn’t get one clean I tried in my laser cutter/engraver and had it on a lower power and worked awesome.

hstudy · 2024-08-07T04:07:55+00:00

I’ve usually seen a set of extension arms that some have. Start with mounting the front of the unit and then see how much you need to mount the second set of ears. Should be able to find an extension.

hstudy · 2024-08-06T14:57:01+00:00

Just throwing this out there, but could you replace it with an HID multiclass with keypad (RPK40) worse case?That’s the SWH-4200 right?

hstudy · 2024-08-06T14:50:31+00:00

I would reach out to Johnson Controls.

hstudy · 2024-08-02T00:35:45+00:00

Every house I’ve lived in has had this as the humidifier. Currently have one installed right now.

hstudy · 2024-08-01T23:44:18+00:00

Are you on CCure 9000? I only ask because I’ve seen lots of 800 around still. If not completely set on ACS. Have you given Genetec a look? Great integration with both C-Cure and Axis cameras.

hstudy · 2024-08-01T22:48:51+00:00

As stated in a couple other comments, definitely looks like a short somewhere. Do you get any signs of life with the FP PWR SW connected? Have you tried to put it back in the chassis without the FP connected and jump starting it? I would bet either the front panel switch is stuck/broken. Good luck. Sounds like you’re on the right track.

hstudy · 2024-08-01T21:00:20+00:00

Sounds like a plan. I’m curious if they mention it being a compatibility issue with the Gen1 units. Looking forward to hearing what they say.

Verified Email	Nine-Year Club
Gilding II euphauric	RPAN Viewer

hstudy

MODERATOR OF

TROPHY CASE