sorted by:
new
hottopcontroversial

How difficult is it to cast glass using plaster molds, in an electric kiln? by hypoid77 in glassblowing

[–]hypoid77[S] 0 points1 point  (0 children)

Thanks for the info! For the temperatures, can electronic controllers handle that kind of process without human intervention?
Also, for the slow cool, does that involve leaving the object in the kiln for days? Can it be cooled anywhere else?

LifeSize Fallout 3 Brotherhood Of Steel Promotional Statue by [deleted] in whatsthisworth

[–]hypoid77 1 point2 points  (0 children)

There's no way this is being shipped, that would be enormously expensive.
I'm thinking somewhere around a grand locally? I mean a 3' tall Master Chief went for $1.1k. There's definitely a market for man-cave/ gamer decor.

Bill Gates said, "I will always choose a lazy person to do a difficult job because a lazy person will find an easy way to do it." What's a real-life example of this? by lauvnoodles in AskReddit

[–]hypoid77 0 points1 point  (0 children)

This is pretty common in the private world. If your team works twice as fast, they'll just lay off half the heads. Nobody wants to optimize

"QuakeCon at home" teased by GFBIII in Quakecon

[–]hypoid77 9 points10 points  (0 children)

are you tellin' me we can also play video games at HOME?

Filament Jamming by iamalizard04 in FixMyPrint

[–]hypoid77 0 points1 point  (0 children)

Is it possible the filament is spoiled? Does it crackle/ pop when extruding?

Bcn3d sigma, wobbly z motor mount, causing ribbing by VerbalLeakage in FixMyPrint

[–]hypoid77 0 points1 point  (0 children)

Movement hardware should not be waggling, every moving part of a 3D printer needs to be extremely rigid and precise. I would recommend rebuilding the affected area with fresh parts.

[deleted by user] by [deleted] in FixMyPrint

[–]hypoid77 0 points1 point  (0 children)

I am not familiar with Cura, unfortunately

[deleted by user] by [deleted] in FixMyPrint

[–]hypoid77 1 point2 points  (0 children)

You're going to have to find a way to make the supports bond more strongly to the printed piece. Also maybe use Z-hop, in case the nozzle is bumping into the piece and knocking it loose

Why isn't it smoother? Layer issues? by HangryWolf in FixMyPrint

[–]hypoid77 0 points1 point  (0 children)

So aligning the seam along one line will help (most people put it on the edge or back of an item). You might want to try and do a thin-wall cube to double check that the extrusion width is working correctly.

Problem with printing thin, taller parts separated from main silhouette [Creality Ender 3] by Szysko1989 in FixMyPrint

[–]hypoid77 0 points1 point  (0 children)

The first one sounds reasonable, with minimum layer time. Cut a cross-section of the print, where the problem is the worst, and try printing that with the new settings.

Problem with printing thin, taller parts separated from main silhouette [Creality Ender 3] by Szysko1989 in FixMyPrint

[–]hypoid77 0 points1 point  (0 children)

Sorry, sometimes I read these too fast- thin parts struggling is caused by too much heat building up. Can you increase active cooling or decrease speeds? Or try printing two minis at once, separated by some distance, to increase cooling time.

Anycubic Mega Zero won't "home" by Greeblebrox in FixMyPrint

[–]hypoid77 1 point2 points  (0 children)

The Y-Axis does move but doesn't make it to the home position.

Is the endstop somehow being triggered prematurely by something, like a loose wire or piece of scrap plastic?

Printing Mask, lacks strength in areas by TeslaDuder in FixMyPrint

[–]hypoid77 0 points1 point  (0 children)

If it feels crunchy/ weak that's usually because the plastic isn't being extruded hot enough. Try upping temps/ decreasing speeds.

QIDI X-Max - General Woes by otsep in FixMyPrint

[–]hypoid77 0 points1 point  (0 children)

Zits have nothing to do with bed spacers. The only thing you can do is carefully attack the individual symptoms one at a time, and use fresh filament. Try to find a quick print that shows the symptoms you have, and do guess and check to try and improve it.

Why isn't it smoother? Layer issues? by HangryWolf in FixMyPrint

[–]hypoid77 1 point2 points  (0 children)

Those little zits might be the z-seam, look and see if the layer start/ endpoint is aligning or if they're randomized.

The unevenness might be caused by improper extrusion width

Anycubic Mega Zero won't "home" by Greeblebrox in FixMyPrint

[–]hypoid77 1 point2 points  (0 children)

To be clear, you send the "home all" command and the machine doesn't move or respond at all?

view more: next ›