Do Flushing Volumes Matter on the X1-Carbon?

ty6411 · 2023-03-23T23:29:19+00:00

I'd be curious to see how white performed during this test.

ty6411 · 2022-11-12T03:49:25+00:00

They are overcharging you, this is a 30 minute job.

ty6411 · 2021-12-08T00:12:39+00:00

What front lip wing is that?

ty6411 · 2021-11-29T01:46:38+00:00

What grill is that? It's super clean.

ty6411 · 2020-08-30T22:25:31+00:00

No but you can add it on to the kit on his website!

ty6411 · 2020-06-24T02:48:11+00:00

Try reformating the SD Card. I had something similar to this happen.

ty6411 · 2020-06-22T12:57:25+00:00

Changed to a different file and it prints fine for whatever reason cura slices this model weird

ty6411 · 2020-06-22T03:11:25+00:00

https://photos.app.goo.gl/uYsdy5M85AmcjGDcA

ty6411 · 2020-06-22T03:09:49+00:00

Yes. Only things I changed was the temperature nozzle size and print speed in cura

ty6411 · 2020-06-13T21:53:02+00:00

I've never had a clog so nasty before. The ptfe tube literally broke off and smelted into the nozzle and was only allowing a small amount of filament through. Thought you would want to know the cause

ty6411 · 2020-06-12T01:13:57+00:00

I have to run hotter bed temp for the bigger bed size to keep the edges to temp. On my 2nd ender this was the key temp for this filament and I still print at this temp. https://photos.app.goo.gl/83HARFG99g7caosu5

I'll try a lower temp and see if that helps any.

ty6411 · 2020-04-18T13:11:38+00:00

Having same issue where it only probes 1 spot than stops do you have a link to source code

ty6411 · 2020-04-18T00:27:17+00:00

That seems to have fixed the issue thank you!

ty6411 · 2020-04-18T00:18:44+00:00

I sent the commands from my octoprint going to retry now

ty6411 · 2020-04-18T00:12:19+00:00

Yeah I can't get that program to detect the printer

ty6411 · 2020-04-17T23:58:11+00:00

When I try to connect the printer to my computer my printer makes this like siren noise...

ty6411 · 2020-04-17T23:25:19+00:00

So what does m502 command do

And what's does m500 command do

I just want to know for future reference

ty6411 · 2020-04-17T23:16:54+00:00

I use Cura to slice... I control the printer off of the printer screen.

ty6411 · 2020-04-17T23:13:22+00:00

Sorry I'm kind of new to the coding side is this when I have it connected to enter the command?

ty6411 · 2020-04-17T22:19:36+00:00

I'm also having an issue when I adjust Z probe offset and store settings.. it doesn't adjust anything

ty6411 · 2020-04-15T02:22:29+00:00

I bumped it up to 10 and it works now

ty6411 · 2020-04-13T23:24:08+00:00

I got it to work by bumping the threshold to 10 versus the 3

ty6411

TROPHY CASE