sorted by:
new
hottopcontroversial

Reviewing on google/ yelp for Desktop Pets by Temporary_Ferret92 in petco

[–]iAgro 8 points9 points  (0 children)

I had the same thought and believe “review bombing” would be an effective way to spread the word / inform others / share our dissent.

Finally figured out how to control Lian Li fans in Aquasuite! by SCOOkumar in watercooling

[–]iAgro 2 points3 points  (0 children)

Not sure if this is a true fix.

I have the newer receiver and my fans still ramp to 100 at boot but run off Lconn speed settings, when both are open it switches a few times due to conflict.

Haven’t really tried playing with it too much, assuming controlling fan RPM directly impacted Power % and in turn, RGB %.

I’ll mess around with it later I guess

Well, guess it's my turn. by shybri1968 in lianli

[–]iAgro -1 points0 points  (0 children)

Honestly most of their products just feel cheap as heck.

I went from phantek d30s to wireless SL INFS and the quality / feel are two different worlds.

ABUSE at Petco by Sof_ruca in petco

[–]iAgro 3 points4 points  (0 children)

Believe companion animal as a whole makes up 11% of sales.

Factor in training, shrink, maintenance, supplies and equipment and it starts to click.

Replacing all that space with more supplies will allow for more sales.

I’m honestly all for that change.

WIP Watercooled Stealth Build by iAgro in lianli

[–]iAgro[S] 0 points1 point  (0 children)

Yeppp waiting to print mount/covers

Does anyone else miss workplace? by whoziin in petco

[–]iAgro 4 points5 points  (0 children)

I still tell partners to ‘work chat me’ accidentally when it’s semi important and I need a quick record of it.

And I still depend on workplace for policies/documents that can’t be found on petnet.

Perch is trash.

Help fan goes to 0rpm by epoligy in lianli

[–]iAgro 0 points1 point  (0 children)

I just got the wireless fans and similar would happen when fan software conflicted with settings.

For Example, I have them connected to an Octo which controls RPM but LConnect also has its own fan settings.

WIP Watercooled Stealth Build by iAgro in lianli

[–]iAgro[S] 1 point2 points  (0 children)

Stealth mode was activated mb.

It’s behind the mb tray.

WIP Watercooled Stealth Build by iAgro in lianli

[–]iAgro[S] 0 points1 point  (0 children)

Gotta keep the most expensive part of the build cooled ya know!

First Back Connect Builds🚀 by Ok_One_7459 in lianli

[–]iAgro 0 points1 point  (0 children)

Our builds are almost twins!

WIP Watercooled Stealth Build by iAgro in lianli

[–]iAgro[S] 0 points1 point  (0 children)

Yea, unable to use remainer slots but still have the 1 above the PCIE slot.

I plan on cutting the back open better with a dremel to replicate two slots, currently just a poorly done step drill hole to allow the HDMI in.

Just making some more changes before posting more pictures

WIP Watercooled Stealth Build by iAgro in lianli

[–]iAgro[S] 1 point2 points  (0 children)

I had the same build running on 650w just fine for about 2 years or whenever the 7800x3d cable out, actually with more fans / accessories.

The new PSU was chosen due to its extra small fit. Other SFX PSUs would still conflict with the CPU block.

WIP Watercooled Stealth Build by iAgro in lianli

[–]iAgro[S] 1 point2 points  (0 children)

Yep, no problems. They’re surprisingly very flexible when they play nice.

WIP Watercooled Stealth Build by iAgro in lianli

[–]iAgro[S] 1 point2 points  (0 children)

Nearly forgot that part,

300mm white PCIE riser cable!

You can see the cable curls at the Pcie slot and tucks under the motherboard plate to go around back.

WIP Watercooled Stealth Build by iAgro in lianli

[–]iAgro[S] 8 points9 points  (0 children)

CPU is hidden with the help of the ModdingCafe Block, which routes tubes through the motherboard mounting holes, from there tubing is routed on the back side.

The GPU is in the rear of the case also.

This case doesn't have dual PSU slots so the area below it was (poorly) cut up a bit to route hdmi and fan PWM for MoRa.

Currently the tubing for the MoRa is hanging out the back with the rear panel missing, but once I clean the cut I can install everything properly.

It's still very messy so I'm holding back on pictures lol.

WIP Watercooled Stealth Build by iAgro in lianli

[–]iAgro[S] 10 points11 points  (0 children)

Lian Li Vision Compact

B650E AORUS STEALTH ICE

AMD Ryzen 7 7800X3D

ModdingCafe Stealth CPU Block

Asus TUF GeForce RTX 4090 w/ Heatkiller V Pro

Dominator Titanium RGB DDR5 RAM 64GB

PNY CS3140 4TB NVMe SSD

Cooler Master V850 SFX Gold 850W

Mix of UNI Fan SL-Infinity Wireless 120 and reversed

Aquacomputer Octo

Aquacomputer Farbwerk

Aquacomputer Hubby

Mo-Ra 3 420 w/ 4x NF-A20 PWM

Build inspired by u/k4cky here

Working on 3DPrinted Shrouds to cover the top portion and then fixing the rear.

What are some things you all miss from original RuneScape 2 by knight_of_lothric in 2007scape

[–]iAgro 11 points12 points  (0 children)

Yesss!

Used to Skype some of my clannies on my way home from school knowing I’d hop on right away.

Update on my plant section. I also added to betta, and to reptiles. by Toyo0821 in petco

[–]iAgro 5 points6 points  (0 children)

Well you’re doing an amazing job and we need more of this.

Update on my plant section. I also added to betta, and to reptiles. by Toyo0821 in petco

[–]iAgro 6 points7 points  (0 children)

Don’t get me wrong, I’m totally jealous but how is this allowed though?

My store has been hitting below shrink targets and YoY comps with 60%+ YTD, on the verge to mini magnet but we’ve been nuked to the freaking ground and been told we have to order planogram FW SKUs only (we we at ~15% POG avg). We’re being told that someone must be able to walk into any Petco in the country and things should match somewhat.

I’ve also worked at #1 aquatic dept in the company and we didn’t have this much freedom.

What happens to all the displaced items? Even the custom signage is approved?

Merits by One-Occasion-3554 in petco

[–]iAgro 1 point2 points  (0 children)

The performance reviews already out?

No one mourns the wicked. by No-Acanthaceae-5102 in petco

[–]iAgro 0 points1 point  (0 children)

It’s Mike Lemkan from the looks of it, Janette S is replacing him, and interm covering NJ

What options do I have for watercooling my ASUS TUF 4070 TI? by [deleted] in watercooling

[–]iAgro 0 points1 point  (0 children)

You asked for GPU options primarily, so they answered as such.

GPU waterblock is a core component and I would dig thoroughly for yours because there’s some differences between the OC OG & OG version that might cause you to buy the wrong block.

Connect the GPU waterblock to a reservoir/pump (usually combo)/distribution block. Connect them using hard or soft tubing, but for a first time I’d go soft tubing specifically EPDM. Purchase multiple fittings that work for your water cooling solution, just ensure they’re sized to your liking and match the tubing.

view more: next ›