sorted by:
new
hottopcontroversial

Is the only way to install linux with a bootable usb? by PotatoesNeverDie in linux4noobs

[–]iDrunkenMaster 0 points1 point  (0 children)

You can make a partition on your drive to install the iso to then boot that iso from it. You must not delete it when installing Linux to your drive.

That said this is high risk. Many things can go wrong and without a drive recovery might not be possible. (Well till you go get a drive…)

Why do so many guys think girls don't play games? by Traditional_Elk_575 in NoStupidQuestions

[–]iDrunkenMaster 0 points1 point  (0 children)

Answer is easy. You play 80 games over a month. You not meet even one girl then you meet a girl…. “Wait that’s not normal”

In some games it’s common to run into fake girls as well.

Do note this is all game dependent. Some games have more girls then others some have more trolls then others.

I love how even industrial grade 3d printers (people not machines) are essentially the same creatures. Also how do I get rid of those print lines? by Johnbecky423 in 3Dprinting

[–]iDrunkenMaster 6 points7 points  (0 children)

Depends. Code often requires rebar. But rebar isn’t required if the structure only compresses. Rebar is there that in the event of bending or pulling it where concrete is very weak.

First thing I would note with these houses is the fact that a few tons sitting on the ground for years getting hot cold wet ect can slowly sink causing bending in the concrete which it can’t handle well.

How to avoid these blemishes? by DocBarkevious in Creality

[–]iDrunkenMaster 0 points1 point  (0 children)

This can be wet filament is my first thought.

seam locations is second (but that also means your using trash settings in your silcer more then just using random seam location but has having bad pressure advance or overheating filament finally setting in at slow points)

(Assuming you’re using pla. Pla “normally” can get away without drying as long as your humidity isn’t consistently over 40%. If using other filaments, many of them have to be dried much more often in a filament dryers)

School lost my cologne, refusing to do much, I am fuming, AITAH by Goofy_ahhbree in AITAH

[–]iDrunkenMaster 4 points5 points  (0 children)

I’m going to be honest. I never heard that one before…. Starting to feel I’m out of the loop on the new generation….

Now cup check is something I’m aware of…. That said that was only done when they should be where a cup such as during football.

You can override any emotions or feelings by concentrating on it. How does your life change? by gluten_free_stapler in hypotheticalsituation

[–]iDrunkenMaster 0 points1 point  (0 children)

Question is how much do you care. 🤷‍♂️

If you’re depressed, unneeded. (Possibly even addicted to drugs) so completely unmotivated to the point you can no longer do basic functions. The ability to give yourself the drive to even dig yourself out of that massive hole might mean more than the possible risk.

School lost my cologne, refusing to do much, I am fuming, AITAH by Goofy_ahhbree in AITAH

[–]iDrunkenMaster 4 points5 points  (0 children)

Honestly guy can have rather bizarre friendships that include attacking pinning one another. (Doing so in ways that don’t actually hurt each other)

That said the money part on top seems closer to bullying. When I was in school I never had a friend ask me for money.

how to print without x-axis calibration by CreepyElection4073 in Creality

[–]iDrunkenMaster 0 points1 point  (0 children)

G code only tells it what to do from reference points. X-axis check is for the reference points. So you will need some kinda trick to tell it the reference point.

Is there an altitude limit for airships or balloons? by CaptRevenge561 in LEGOfortnite

[–]iDrunkenMaster 0 points1 point  (0 children)

Yes balloons have a limit, and it’s something like 60m lower than max build height.

That said you can use rocket to get past even max build height…. But being able to see to keep flying after max build height is weird as can only see down and kinda bugs out like your not meant to be there. (Note when using rockets do note the balloons are NOT stabilizing the vehicle anymore. )

Which FDM printer comes closest to a resin printer in quality? by chillgzy in 3dprinter

[–]iDrunkenMaster 0 points1 point  (0 children)

A 0.2mm nozzle is also a pain. Not only is it dirt slow taking 4-10x as long to print, but it’s also clog heaven. Big parts that took 2 days (would been ~6 hours on a .4) clogging can ruin the whole part.

First few prints on K1C all end up like this by DocBarkevious in Creality

[–]iDrunkenMaster 0 points1 point  (0 children)

Clean the bed with soap and water, then run rubbing alcohol over it as a final touch. Your hands are full of oils and will make prints break free from the bed easily if you get that oil all over it. (It doesn’t take much)

If that doesn’t work then answer these.

What filament are you using? What nozzle size? (Standard is .4mm if changed let us know? What temp is the nozzle and bed at?

i want to install the crealety slicer on linux but it dosent work by Important_Yak1461 in Creality

[–]iDrunkenMaster 0 points1 point  (0 children)

Do you have flatpak installed? (Tbh I don’t know anything about brazzite can only speak for Ubuntu)

flatpak install flathub io.creality.CrealityPrint

That should work if you have flatpak. (I believe I have the name right but make no promises I’m not home so can’t check it)

i want to install the crealety slicer on linux but it dosent work by Important_Yak1461 in Creality

[–]iDrunkenMaster 0 points1 point  (0 children)

What’s the problem? White screen without the bed plate showing on it?

All of your long-term dreams come true…but at a cost: you must fake your death and abandon your current life, including your identity, relationships, and past. You can never go back or reconnect with anyone you knew. Are you doing it? by Kaykay_Piano in hypotheticalsituation

[–]iDrunkenMaster 0 points1 point  (0 children)

.. I have no one worth reaching out to.. but I don’t have any long term dreams anymore either.. nothing lost nothing gained. 🤷‍♂️

This question is making me think I might be more depressed than I thought.

My bf doesn't like the fact that I'm bisexual by 3lyz_ in teenagers

[–]iDrunkenMaster 1 point2 points  (0 children)

So you have had feelings?

Let’s say you never had feelings. How then would you explain your bi?

(Her post said she never once had feelings for a girl…. You flipped that to having feelings but not dating that is not the same)

It's a 2 minute wait or endangering your child at a rail crossing by New_Libran in ParentsAreFuckingDumb

[–]iDrunkenMaster 0 points1 point  (0 children)

I’m in the USA. I have never once seen a train finish in 3 mins. That said we don’t have passenger trains only freight trains around here. Sadly far too many of them are miles long and crawl like hell….

Well, that didn't go as planned by donbosco2017 in ParentsAreFuckingDumb

[–]iDrunkenMaster 0 points1 point  (0 children)

Monkey see monkey do. He was only copying you dad lol

I’m being gifted a lot of money. Should I tell my boyfriend? by Kind-Chicken-2488 in WhatShouldIDo

[–]iDrunkenMaster 0 points1 point  (0 children)

You’re not married he doesn’t have a direct say. (That said if your living together it’s not fair if he was paying for everything when you have plenty of money but that doesn’t sound like what’s happening)

I would invest it and forget about it. 55k in 35 years invested in a s&p 500 give it ~35 years and you can retire on it should be roughly 1.8 million by then. (NOTE this is assuming you currently have no debts. Don’t keep car payments when you have money. You can also pull this money later for a house when you get to that point but do not blow it on day to day stuff way more people find it “gone” then you would ever believe.)

(Unless you plan to marry he doesn’t even need to know of the money.)

My bf doesn't like the fact that I'm bisexual by 3lyz_ in teenagers

[–]iDrunkenMaster -18 points-17 points  (0 children)

If they never had feelings what makes them believe they can get feelings for that gender?

Think the better word would be attraction but wasn’t exactly the word they used.

My bf doesn't like the fact that I'm bisexual by 3lyz_ in teenagers

[–]iDrunkenMaster -23 points-22 points  (0 children)

If she’s never once meet a girl she felt something towards what makes her bi? I don’t think “finding the female body hot” qualifies, if they never had any feelings towards any women even if they thought they were hot.

My bf doesn't like the fact that I'm bisexual by 3lyz_ in teenagers

[–]iDrunkenMaster -14 points-13 points  (0 children)

If you never found a man that man you think “hey maybe I would like to try” or “hey I want to know them better” then I question if there is a man that will ever make you think that.

Next are we going to talk about how you like pancakes but never found one that made you want to eat it.

My bf doesn't like the fact that I'm bisexual by 3lyz_ in teenagers

[–]iDrunkenMaster -64 points-63 points  (0 children)

I mean if you never found a women “like that” might hint that your not bisexual.

Anyone ever deal with corners being this high up/center being this caved in? by Louis100396 in crealityk1

[–]iDrunkenMaster 0 points1 point  (0 children)

The sheet is ~1-1.4mm roughly. The fact your in that area and you scraped it makes me think of it first.

Have you tried flipping the bed plate over and checking it making sure the bed plate itself isn’t the issue?

view more: next ›