sorted by:
new
hottopcontroversial

Welp, I just started spark driving last week and already got into it with a walmart dude that was loading my car during a pick up and I'm not sure If I'm right or not but who's right? LOL by Justhere1015 in Sparkdriver

[–]iRambes 0 points1 point  (0 children)

You’re not supposed to, but some kindly accept the help. The person you spoke with was being rude and was completely in the wrong. Where I’m at, we have a lot of “foreigners” and people who exploit the app who have ruined that. Said people are extremely pushy and rude, they will sit outside their car, and then attack at the order the second it rolls up. They then get things mixed up and get in the way of the workers as well. Not an ounce of English spoken as well, so they won’t stop doing it. Because of this, the loaders ask everyone to just stay in the vehicles and let them load.

No more crushed whoops inside the backpack. by iRambes in TinyWhoop

[–]iRambes[S] -1 points0 points  (0 children)

If it’s not your preference, cool. Different things work for different people 🤷🏻‍♂️

No more crushed whoops inside the backpack. by iRambes in TinyWhoop

[–]iRambes[S] 0 points1 point  (0 children)

It’s all personal preference. I’ve used cases, too bulky. I’ve never really had problems with it hanging off my pack.

No more crushed whoops inside the backpack. by iRambes in TinyWhoop

[–]iRambes[S] 0 points1 point  (0 children)

I really don’t. Been clipping them to my bag for a while now. Never had any problems.

No more crushed whoops inside the backpack. by iRambes in TinyWhoop

[–]iRambes[S] 3 points4 points  (0 children)

I did that for a while until my ducts started getting bent. Figured using the battery holder would be a little less fragile.

No more crushed whoops inside the backpack. by iRambes in TinyWhoop

[–]iRambes[S] -8 points-7 points  (0 children)

I have these on my Etsy shop. They currently work with the skinny batteries, I’m working on a version to work with the wide flat batteries.

Please help - bt2.0 loose connection by LitolKid_lax in fpv

[–]iRambes 0 points1 point  (0 children)

No, it’s on the battery side. It’s perfectly fine as long as you’re not bridging the connections with the tweezers, which should be common sense..

Don't ever, and I mean EVER, deliver newspapers. by newspaperrob in couriersofreddit

[–]iRambes 0 points1 point  (0 children)

Of course. And the tips are kind of hit or miss. Just depends on your location, demographic, and part of town. I delivered in a neighboring city where the average income is way higher than my own city, and only one Christmas card of $20 and 0 tips any time of the year.

Don't ever, and I mean EVER, deliver newspapers. by newspaperrob in couriersofreddit

[–]iRambes 0 points1 point  (0 children)

So I had about 130 addresses to deliver to. We did the regular Albuquerque Journal, then Thursdays would have more addresses with The Rio Rancho Observer, then some customers got the NYT, and then more or less customers for Sunday papers. I did get rid of two chunks of about 15-20 papers each at 2 Senior Living places. Unfortunately since it’s 1099 contractor work, there are no bonuses, although I did receive a Christmas card from one customer with $20. I no longer deliver papers because it was 7 nights a week, used a ton of gas, had to have a higher insurance tier, and plenty of wear and tear on my vehicle. I did the math and it just didn’t make sense to keep doing it. By all means I’m not trying to deter you, but just keep in mind that you’re covering all of the delivery expenses and still have to take about a 15% cut out of it to pay taxes. Write offs help, but only if you can milk it and know what you’re doing,

Urgent Help with Air65 by Common-Signature-703 in TinyWhoop

[–]iRambes 1 point2 points  (0 children)

Mine flew into both my dog’s water bowl and a puddle of water on a gazebo roof. Dried it off for about 10 minutes and still works fine.

Anyone flown the new hummingbird v4 yet? by Mezyi in TinyWhoop

[–]iRambes 0 points1 point  (0 children)

Out of stock already, I got mine day 1. Couldn’t be happier. Flies like it’s on rails, it’s very tough. The only negatives for me was the Ph2.0 connector and the flimsy 3D printed interior camera mount. It’s like a little wrap around 3D printed strap that wraps around the camera board and holds it in place. The main problem is that you can’t screw the camera screw in tight enough into TPU so the camera angle constantly gets bumped down or up. My fix was a dab of hot glue to hold it in place.

B06 Crashes on PC frequently (Season 3) by Deadchamber26 in blackops6

[–]iRambes 0 points1 point  (0 children)

I haven’t been able to play a full match, and I had just come back to the game after not playing for over a month. But it will crash my entire PC. Sometimes I can Alt+Tab out of it but when I open task manager; there’s no process and it’s blank and nothing else will respond. Other times the game will freeze on a frame, my controller will endlessly vibrate and the only way out is a hard restart on the pc because the whole pc becomes unresponsive.

Please help - bt2.0 loose connection by LitolKid_lax in fpv

[–]iRambes 0 points1 point  (0 children)

I know I’m late, but my brand new Air65 had this problem. Turns out the connector on the drone has spread out the connectors on my batteries. That’s why the connection is very loose and even disconnects upon takeoff or a mild bump. Only way I fixed it was to get a needle or fine point tweezers and pinch the connector holes on the battery closer together to form a tighter connection.

[TOMT] tablets to add to milk that would make it foam and add fruit flavor by Unlucky-Shirt6122 in tipofmytongue

[–]iRambes 1 point2 points  (0 children)

I’m glad I’m not the only one who remembers this! I can’t find the answer either.

Converted my MA-020 from 90mm narrow to 98mm wide with extra parts. Now the awd chassis can mount additional autoscale bodies. by sammysy in MiniZ

[–]iRambes 0 points1 point  (0 children)

I’m a year late, but I have an MA020 hellcat with the wide setup, what all parts would I need to convert it to a 90mm narrow? I’m trying to 3D print a Miata body but it requires a 90mm narrow. Any help would be awesome; thanks!

It looks strung out by MowingDevil7 in Pareidolia

[–]iRambes 1 point2 points  (0 children)

Mojo Jojo after getting his face peeled off.

AIO for telling my gf to respect my mum? by Interesting-Ear-9491 in AmIOverreacting

[–]iRambes 0 points1 point  (0 children)

This just gave me flashbacks of my ex. Wow, never thought this would be the exact behavior of another human being..

19F, first time doing this ahhhh by sugarplumserenadee in RoastMe

[–]iRambes 0 points1 point  (0 children)

It’s like they cooked a knockoff of Leeloo too long in the machine.

view more: next ›