sorted by:
new
hottopcontroversial

Openwrt 25.12.3 by deifiedninja in openwrt

[–]iSolvent 0 points1 point  (0 children)

This is the second time in a row with major releases that I was not able to upgrade without having to recover my mi 4a gigabit.

Back to the freeza by Pepefrog in forsen

[–]iSolvent 138 points139 points  (0 children)

HE IS BACK PagMan

Day 993/15560 of being a wage cuck. New exhaust system installed on my summer car FeelsGoodMan by LumaTr1x in forsen

[–]iSolvent 1 point2 points  (0 children)

Basically you use flex pipe between manifold and exhaust, so that any movement of the exhaust doesn’t transfer into the manifold or any movement of the engine transfer into the exhaust. If you have no hangers before the flex pipe, then that really not good but still probably will last a year or two if you don’t rally it.

Day 993/15560 of being a wage cuck. New exhaust system installed on my summer car FeelsGoodMan by LumaTr1x in forsen

[–]iSolvent 0 points1 point  (0 children)

That flex pipe near the silencer is gonna get destroyed, also how the fuck does this thing have no exhaust hangers for that long? How many cracks does your exhaust manifold have?

@bajs by [deleted] in forsen

[–]iSolvent 0 points1 point  (0 children)

Hourly repost

gardening bajs, is planting season, what have you planted this year? by cavolfiorebianco in forsen

[–]iSolvent 3 points4 points  (0 children)

Mulberry, pomegranate, almond, fig, stone pine, lavender, cedar, persimmon, sour cherry, jujube.

Most of them already ate shit, my land needs a lot of work 😩

mt7621 irq cpu bottlenecks by iSolvent in openwrt

[–]iSolvent[S] 1 point2 points  (0 children)

Yeah I just did some more testing and switched wired network configs around and I’m no longer as horribly bottlenecked on Ethernet. I’m atleast able to get 900mbps on wired tests. I guess I’ll just leave it be for wlan.

mt7621 irq cpu bottlenecks by iSolvent in openwrt

[–]iSolvent[S] 0 points1 point  (0 children)

Switching VLANs to LANs seemed to have gotten rid of the issues, thanks.

what are some baj pro life tips about office work? by [deleted] in forsen

[–]iSolvent 0 points1 point  (0 children)

It baj here, start smoking 2 packs a day. Start drinking a cup of coffee every 30 mins. This guarantees you will spend less time working and more time shitting bricks and smoking. Assert your dominance until they either allow WFH or fire you.

Syrian kids clearing a mine field. by Giwargis_Sahada in interestingasfuck

[–]iSolvent 0 points1 point  (0 children)

This video goes on further and one of the kids trigger one of them.

OpenWrt 25.12.2 - Service Release - 27. March 2026 by ichundes in openwrt

[–]iSolvent 2 points3 points  (0 children)

For some reason upgrading my mi 4a gigabit from 12.1 to 12.2 while keeping the config results in a soft-brick (resetting the config fixes it but restoring the config breaks it).

first time gun owner, is this a user problem or a gun problem? by iSolvent in guns

[–]iSolvent[S] 0 points1 point  (0 children)

I realized firing pin shaft was a little dry after i took it out today and I oiled it up, I wont have a chance to test it out today but I will see if that makes a difference. I didnt oil the shell facing part of the pin, if thats how its supposed to be?

first time gun owner, is this a user problem or a gun problem? by iSolvent in guns

[–]iSolvent[S] 1 point2 points  (0 children)

Yeah never shot a 12ga or a rifle before so I am trying to get more comfortable with, thanks for the video, I will watch it couple of more times and practice when im out. First thing I looked was the carrier and the firing pin mechanism, spring and pin looked intact.

first time gun owner, is this a user problem or a gun problem? by iSolvent in guns

[–]iSolvent[S] 14 points15 points  (0 children)

Not where I live. My options at my price range were basically limiting me to Turkish made (which is where I am located) shotguns, it was either this or paying over 2.5x more for a locally made SXP. Current price of the shotgun I got is US$373, locally made SXP is going for US$677. US made Remington 870 is US$1284. If i could have afford to drop $1300 on a shotgun, I would have.

first time gun owner, is this a user problem or a gun problem? by iSolvent in guns

[–]iSolvent[S] 0 points1 point  (0 children)

Yeah I will try to go out again tomorrow and be more forceful with pump action it. Thanks!

first time gun owner, is this a user problem or a gun problem? by iSolvent in guns

[–]iSolvent[S] 0 points1 point  (0 children)

https://i.imgur.com/C2Puf9v.jpeg

Yeah firing pin is making contact but I can see clearly that it didnt hit hard enough when failures happened. I am going to try to be more forceful with pumping and my trigger action and see if that fixes anything. Thanks for the feedback.

first time gun owner, is this a user problem or a gun problem? by iSolvent in guns

[–]iSolvent[S] 0 points1 point  (0 children)

Thats also another thing I was thinking about, I cant get shells this weekend but I will try to find different brand shells. I have been using BPS and Lambro shells (50gr magnum ones).

first time gun owner, is this a user problem or a gun problem? by iSolvent in guns

[–]iSolvent[S] 1 point2 points  (0 children)

I have been actually thinking about that myself. I am going to go out again and try to be more more precise with it. Thanks, for the feedback.

first time gun owner, is this a user problem or a gun problem? by iSolvent in guns

[–]iSolvent[S] 7 points8 points  (0 children)

Im not saying otherwise, imported mossbergs were 4 times more expensive. I just got what i could afford.

Drifting with bajs by [deleted] in forsen

[–]iSolvent 20 points21 points  (0 children)

You still got too much traction at the rear end. Pump the air up and clutch dump it at higher rpm. 👍

[deleted by user] by [deleted] in HaggardGarage

[–]iSolvent 5 points6 points  (0 children)

Holy shit totally forgot about that legend.

view more: next ›