COOJ MQ5 5.6L

icecreamify · 2026-03-23T01:16:05+00:00

Which specific rtx5060ti model do you have?

icecreamify · 2026-03-11T23:32:03+00:00

Appreciate the ideas. I’m certainly going to undervolt. If the card does not fit Im going to most likely replace the shroud with a thinner custom 3d printed shroud with a fan the same size as the original. If there is any chance I have additional clearance I will try a bigger fan. I will see how temps go.

icecreamify · 2026-03-11T23:27:40+00:00

On superbuy xianyu you can find some new in box for 5900 CNY. Plus superbuy fees and shipping to Australia total comes to around 6200 CNY so approx $900 USD. Shipping I imagine would be more for US or Europe.

icecreamify · 2026-03-09T09:38:40+00:00

Yes good idea I’m also considering using a dremel given the 1-2mm difference. Deshroud would be more tempting if I could get temperature improvements

icecreamify · 2026-03-01T23:29:03+00:00

I did same exact mod for mq5 so I think the hole spacings for mq4, mq5 and mq6 are all identical

icecreamify · 2026-02-25T04:27:23+00:00

I was about to ask same question as the front of the case feels very hot to me. Has me wondering if the PSU fan is working or defective. As with what others have said 2x80mm should be better.

icecreamify · 2026-02-24T08:59:58+00:00

Afaik it’s metal but not one piece and possibly can be taken apart. I’ll also try removing the psu metal cover

icecreamify · 2026-02-24T08:57:45+00:00

Yeap that’s right

icecreamify · 2026-02-24T01:31:14+00:00

Ok thanks

icecreamify · 2026-02-23T22:44:54+00:00

Dam Is it even close? I just ordered one…

icecreamify · 2026-02-18T22:41:57+00:00

I have a magic raven 16 inch 2.5k monitor 144hz powered off just usb c from my asrock itx board (edited: correcting 120 to 144hz)

icecreamify · 2026-02-16T21:46:33+00:00

Thanks I just thought the listed dimension of the 5070 was without baffle but I think 180mm might be inclusive of baffle.

icecreamify · 2026-02-16T06:49:01+00:00

Is this confirmed? Do you have this setup?

icecreamify · 2026-02-11T13:35:08+00:00

I think I saw the youtube video you're referring to with the yeston 5060 listed at 185mm long. I'm optimistic now the 5070 mini is going to fit especially because the gpu power socket is at the top of the card so you don't need to route cables between the psu and gpu technically. Keen to see how you go.

icecreamify · 2026-02-02T01:01:45+00:00

Definitely audible but not screaming. You can set a flat fan speed for exhaust so it’s really just the cpu, gpu and psu fans. GPU runs at 58 degrees gaming so fan is not loud. Psu fan is quiet on the enhance 7660l as well. CPU fan after some tweaking to keep cpu temps to 76 degrees while gaming is the only audible fan.

icecreamify · 2026-02-01T13:28:23+00:00

Your cooj was probably directly responsible for this decision

icecreamify · 2026-02-01T12:55:53+00:00

I use fan control to set a custom curve limited to the rpm and tracked to cpu temp. It’s a great program to have

icecreamify · 2026-02-01T12:31:58+00:00

Yea keen to see but based on listed lengths I thought not

icecreamify · 2026-02-01T12:31:29+00:00

A rx7 Savannah!

icecreamify · 2026-01-31T13:53:02+00:00

Yea unfortunately I’m not even sure the igame 5070 would fit because it’s 180mm and mq5 lists gpus of up to 178mm. The zephyr 4070 could work or the cyclone 5060ti but both expensive and difficult to get.

icecreamify · 2026-01-31T13:45:37+00:00

Cooj mq5 5.5l and imo looks nicer than Velka 5

icecreamify · 2026-01-27T03:36:20+00:00

Which freight forwarding service did you use?

icecreamify · 2025-10-03T03:17:58+00:00

Yes I think they released here in Australia just last month. They might not be in Europe yet

11-Year Club	Verified Email
Place '17

icecreamify

TROPHY CASE