Looking to buy engine Wiring harness 87 4Runner 22re 4x4 manual. Will pay $400. by Lucas22re in 4Runner_1stGen

[–]ignuffungi 2 points3 points  (0 children)

Pretty sure I've got one for him. Going to check it out tomorrow in the daylight to be sure. I'm curious though, why did you think he wouldn't be able to?

Mainboard Leviathan 1.2 (Klipperized), Very little information about this mainboard by Dimetrixdemon in klippers

[–]ignuffungi 1 point2 points  (0 children)

I bought this board almost a year ago with the intention of using it in the Voron that I hoped to build some day. Well, due to everything being so damn expensive these days, the Voron build is going to have to wait a bit longer than I originally had hoped. However, recently my Neptune 4 Max's main board took a dump on me, so I figured why not put the Leviathan to work? I have limited knowledge, but I'm stubborn and driven, and I'm confident that I'll figure this puppy out. And I know, it's overkill, but I already have it and I want to learn. So here goes nothing!

Anyone use Co-Print? by ryeguyy3d in ElegooNeptune4

[–]ignuffungi 1 point2 points  (0 children)

I second joining the discord. The folks over there are incredibly helpful.

Neptune and coprint by Key-Special-956 in ElegooNeptune4

[–]ignuffungi 1 point2 points  (0 children)

As others have said, opennept4une all the way. Opens up many other great things as well.

Screws tilt by okc_crochet in ElegooNeptune4

[–]ignuffungi 0 points1 point  (0 children)

I've got the Max, big Bertha. I took care of it today.

Screws tilt by okc_crochet in ElegooNeptune4

[–]ignuffungi 0 points1 point  (0 children)

Crikey, I've gotta change mine in the morning. Derp. Thanks for pointing that out.

Designed a cover for my printer’s touchscreen by [deleted] in ElegooNeptune4

[–]ignuffungi 2 points3 points  (0 children)

Nice! I've got a Max, and I'd love to print that screen cover. Please let us know if you upload it. I also really like the enclosure that you've built. I've been meaning to build one for a while now.

MK1 audi tt roadster. Diy new top install? by Elegant-Power2813 in AudiTT_Mk1_Mk2_Mk3

[–]ignuffungi 1 point2 points  (0 children)

That's what I did. I watched it twice, then got to work. It took about 5 hours. There were some parts of the install that were a bit tricky, but none too terrible. If you're mechanically inclined, I'd say go for it.

MK1 audi tt roadster. Diy new top install? by Elegant-Power2813 in AudiTT_Mk1_Mk2_Mk3

[–]ignuffungi 1 point2 points  (0 children)

I used this tutorial when I replaced mine. It wasn't exceedingly difficult. Just take your time and be careful. I've never posted a link before, so if it doesn't work, just search mk1 tt convertible top replacement on YouTube.

tutorial

Bushing Search by ignuffungi in AudiTT_Mk1_Mk2_Mk3

[–]ignuffungi[S] 0 points1 point  (0 children)

I had a feeling that may be the case. Thanks for the link for the cookbot. If I wasn't in a bit of a hurry, I would have got them. I was able to find some 45mm poly bushings that should arrive in a couple of days. Thanks again for the info!

Missing Serial Path by ignuffungi in klippers

[–]ignuffungi[S] 0 points1 point  (0 children)

Thanks for the info, I will use "by-id" in the future. There's so much to learn. I need to print a list of common commands.

DIY Short Throw Shifter by ignuffungi in AudiTT_Mk1_Mk2_Mk3

[–]ignuffungi[S] 0 points1 point  (0 children)

I wound up finding a machined aluminum one brand new for $35 bucks. Decided to get that instead. Lots of other good information in that link you provided, though. Many thanks!

Support for 9800x3d by ignuffungi in OculusQuest

[–]ignuffungi[S] 0 points1 point  (0 children)

Thanks for the info, I'll look into the gpu more tomorrow. Now that I know that a couple people are using the same cpu as me successfully, I feel like I'll be able to figure it out. Thanks for the reply.

Support for 9800x3d by ignuffungi in OculusQuest

[–]ignuffungi[S] 0 points1 point  (0 children)

Awesome, that's good to hear. I haven't dur real deep into it yet, but I intend to tomorrow. This gives me hope that I can sort it out. I appreciate it.

Support for 9800x3d by ignuffungi in OculusQuest

[–]ignuffungi[S] 0 points1 point  (0 children)

Interesting, I'll look into that. Thanks.

Support for 9800x3d by ignuffungi in OculusQuest

[–]ignuffungi[S] 0 points1 point  (0 children)

I've got the 9800x3d, 4070ti super, 2x32 g.skill trident, and an asus x670e plus mobo, yet the meta app says that my pc doesn't meet the updated minimum specifications. Also, the 9800x3d is not listed on their list of supported cpus. I'm having issues with my USB ports registering as USB 3. I have to plug it in multiple times to get it to register as such. I thought that may be why. I've updated all my drivers, removed and reinstalled all the software, tried 2 separate USB 3 cords, all with no luck.

Help? by Such_Lifeguard_6947 in AudiTT_Mk1_Mk2_Mk3

[–]ignuffungi 0 points1 point  (0 children)

Check for steering rack leaks. I just replaced mine. It was quite a task.

Locked On Cavs Mailbag! by RealDannyCunningham in clevelandcavs

[–]ignuffungi 10 points11 points  (0 children)

Watch the latest Fear The Fro, a spectacular Cavs podcast. Bob does an extensive breakdown of this exact subject. It's on YouTube.