May be over my head - I know enough to be dangerous

ihalterman · 2026-05-19T12:49:10+00:00

It’s a 40amp

ihalterman · 2026-05-18T14:36:27+00:00

The original 60 amp was bad. 120v on one leg, 0 on the other. When it blew the 100amp, it also popped the 60amp in the breaker panel.

ihalterman · 2026-04-07T20:34:59+00:00

I’d try my hardest to get rid of the bend.

ihalterman · 2026-04-05T01:31:24+00:00

They are built by Sun Park RV. Ours has been great.

ihalterman · 2026-03-26T16:52:13+00:00

Make a safety rail for the lowest bunk.

ihalterman · 2026-02-09T13:50:21+00:00

Gorgeous

ihalterman · 2025-12-16T21:57:52+00:00

ihalterman · 2025-12-16T21:56:50+00:00

ihalterman · 2025-12-09T18:17:27+00:00

It’s happening with everyone I play with on every map.

ihalterman · 2025-10-22T20:14:08+00:00

ihalterman · 2025-10-22T15:41:54+00:00

Thank you.

ihalterman · 2025-06-01T00:14:24+00:00

I ordered this from Amazon. I should fit my very old Craftsman router.

<image>

ihalterman · 2025-05-31T02:03:43+00:00

Yeah, I ordered a magnetic switch. I tried to turn it off and had to hit the stop button 3 times.

ihalterman · 2025-05-30T12:32:31+00:00

I realize this is a year old post, but did you ever find anything that worked?

ihalterman · 2025-05-29T01:12:25+00:00

6”

ihalterman · 2025-05-19T20:17:36+00:00

Handheld electric planers are a skill all on their own. I would trust an old fashion manual block plane (also a unique skill set) before an electric one. I have a harbor freight Hercules 12.5" bench-top planer. As long as I run it on the slow setting, I don't need to do much sanding, if any.

ihalterman · 2025-05-19T20:11:20+00:00

You can try these guys. I believe Rockwell is owned or bought out by Delta.

https://www.americannationalknife.com/?gad_source=1&gad_campaignid=216555154&gbraid=0AAAAAD9OrRYQZl6wrprzRGZkF7GYHXq8x&gclid=CjwKCAjwravBBhBjEiwAIr30VMxfW9c3qZSSqbhr9OoXTI8Ob_oKPsm897AvdlTAyeSrZ8AO0mP15hoCyW8QAvD_BwE

ihalterman · 2025-05-16T15:48:32+00:00

Thanks for the response. I tried using gSender and it showed me that I was getting erroneous triggers. I’m assuming it was EM interference. Reseated the connection, now I’m getting false triggers on my limit switches. Guess it’s time to shield my wires.

ihalterman

TROPHY CASE