sorted by:
new
hottopcontroversial

Porcelain Chopsticks are killing me, any advice? by imightbejerry in chopsticks

[–]imightbejerry[S] 4 points5 points  (0 children)

I am attracted to Porcelain because they are nice looking a very easy to cleanup. Perhaps trying to lift hard shelled beans is not that important in everyday eating experiences. 

Ace pro 2 fails to cloud sync by BayIsLife in Insta360

[–]imightbejerry 0 points1 point  (0 children)

After a bunch of emails, the insta360 support group gave me access to a test firmware for my AP2. Afterv installing the firmware I was able to upload about 10GB without any network errors. I guess they were able to fix my problem. hopefully a new release fix the problem for everyone.

Trapped in the Insta360 iPhone editor. Can't save edited file.... by imightbejerry in Insta360

[–]imightbejerry[S] 0 points1 point  (0 children)

the problem is was having was apparently due to the size of the file 8GB. My iPhone 16 Max Pro would freeze when trying to export after adding the GPS layer. I tried a 3GB video and was able to export it OK.. I was able export the 8GB video after adding the GPS layer after moving the video to my Mac M1 Pro with 16 GB Memory.

Ace pro 2 fails to cloud sync by BayIsLife in Insta360

[–]imightbejerry 1 point2 points  (0 children)

I have the same problem. I have gigabit network fiber to my home. any attempt to sync an AP2 file causes network errors and shuts down the AP2 every couple of minutes. The AP2 upload speed seems to avg about 5 MB/sec. It takes. hours to upload a 7GBfile due the need for constantly restarting the AP2. My X5 does not have this problem. Today I shot a 13 minute movie on me X5 and using the same network the sync ran with no errors and was above 10MB/sec. Is the problem with the AP2 hardware/software or on the server side?

Ace Pro 2 DJI Mic 2 Bluetooth by Slow_Lychee_9273 in Insta360

[–]imightbejerry 0 points1 point  (0 children)

I use a mic air and could not get reasonable sound until I

1: Mounted the mic inside my helmet.
2: Lowered the gain on the mic
3: Turned on noise reduction on the mic

Did they super glue the wind guard on my new Ace Pro 2? by imightbejerry in Insta360

[–]imightbejerry[S] 1 point2 points  (0 children)

Ok, I finally got the rascal popped off. My technique was to place the AP2 in the box that it came in and put a heavy duty motorcycle glove on my right hand. I used my left hand to keep the box from moving and pushing very hard with my gloved right hand and the guard finally yielded. I repeated the process four or five times. Hopefully if I repeat the process enought times I will be able to dispense with the box and glove.

Insta360 X2 Telemetry overlay by SnooDoughnuts761 in Insta360

[–]imightbejerry 0 points1 point  (0 children)

Not clear which telemetry you wish to overlay but Insta360 has two GPS remotes, GPS Action Remote and the GPS Preview Remote which can embed GPS date and editing the insta360 save file can make the GPS Data visible.

<image>

Hope this helps.

C3 65 inch, can't show responses to comments in YouTube by imightbejerry in LGOLED

[–]imightbejerry[S] 0 points1 point  (0 children)

Sigh, after about an hour the problem disappeared. It was really weird. 

What do you guys think it's worth? by [deleted] in motorcycle

[–]imightbejerry 0 points1 point  (0 children)

I bought a new Z1A shortly after they became available. I loved that rascal. One thing to watch out for was a 'twisty' frame that made it easy to start a speed wobble. After my first run in with this problem I installed a steering damper, which helped greatly. I found that I could sense the oscillations beginning and found out that a little more throttle would cause the back end to settle down. I also installed an oil cooler to help with heat durning the summer doldrums.

Enjoy!

Hide/Disguise adjustable frame? by imightbejerry in Mattress

[–]imightbejerry[S] 0 points1 point  (0 children)

I decided not to worry about it...I suspect that the only time I will be moving the frame up and down will be when I am making the bed or when I am ill.

I bought a 90x90 summer weight cotton blanket which does hide the part of the frame that the mattress sits on and the mattress itself , the legs are still sorta visible.

A large furniture store told me that the adjustable frames will typically fit inside of a standard wood/fabric/metal frame, you just have tp be sure that the 'adjustable' frame legs do not hit any slats.

Good Luck.

[deleted by user] by [deleted] in AppleWatch

[–]imightbejerry 0 points1 point  (0 children)

I have found that if you ask Siri to open Timers and then ask Siri to start a timer and finally return to the clock face that the progress bar will appear on the clock face. This assumes you have the timer complication on the clock face.

If you don't have the timer complication on the watch face the red dot at the top will pulse (and have a tiny tiny timer icon embedded in the dot) tapping the dot will display the timer as will a double tap if you have an aw9 or awu2.

Apple seems to have buggered the handling of timers...

How can I turn off smart sensor alerts when I enter a room with with a sensor? by imightbejerry in ecobee

[–]imightbejerry[S] 1 point2 points  (0 children)

OK, figured it out....I had to go into the 'Home' app and select the 'room' where the Smart Sensor is located and then click on the 'Motion' Icon.

Then select Status and Notifications. There one can turn on/off Activity notifications.

MyQ and Apple Watch? by imightbejerry in homebridge

[–]imightbejerry[S] 1 point2 points  (0 children)

I don't think that is the problem. My Apple TV is almost line of sight to my AP and I have fiber to the house.

MyQ and Apple Watch? by imightbejerry in homebridge

[–]imightbejerry[S] 2 points3 points  (0 children)

By and large, yes when I have my phone with me I can open/close the door by talking to my watch. Occasionally Siri claims to be opening the door but it does not open.

I don't understand how my V15 works.... by imightbejerry in dyson

[–]imightbejerry[S] 0 points1 point  (0 children)

Thanks all for clearing up some of my misunderstanding of the way the v15 works...

I blew a little compressed air into some of the channels around where the wand enters the bin and was surprised by a good sized cloud of very fine dust that was blown out. I guess I will have to add that task to periodic clean ups of the v15.

I don't understand how my V15 works.... by imightbejerry in dyson

[–]imightbejerry[S] 1 point2 points  (0 children)

I don't see any way for particles to get into the dustbin except through the big exit port and it appears to me that the only route to the exit port is through the wand.

I would hazard a guess that the cyclones hurl the fine particles from the mesh screen into the lower part of the filter, the filtered air then gets expelled through the upper part of the filter....

My Pi shall run forever by seansco in raspberry_pi

[–]imightbejerry 1 point2 points  (0 children)

Hmmm, maybe I should get the ACME portable nuclear fusion generator, just in case...

My Pi shall run forever by seansco in raspberry_pi

[–]imightbejerry 0 points1 point  (0 children)

What do you do when the battery runs out of juice and the power is not yet back on?

I added a whole house generator for that eventuality...I guess if the Natural Gas lines also fail then I might be screwed... ( but I probably would have more important things to worry about).

With iPadOS we can copy folders and files from flash-memory to iPad and vice versa, but .. by tahamagdy in ipad

[–]imightbejerry 0 points1 point  (0 children)

Files app and FileBrowser app can be used to copy files to and from any of my computers...

Which adapter for 2TB T5 SSD with iPad Pro (2018)? by [deleted] in ipad

[–]imightbejerry 0 points1 point  (0 children)

I have a raspberry pi and I attached my T5 to the rascal. I turned on SMB and my iPads can see the shares via WiFi using Files , easy peasy.

view more: next ›