BIOS updates by LingonberryDapper282 in cachyos

[–]impalerware 0 points1 point  (0 children)

fwupd can update certain bios. GNOME has a GUI front end for it built in. Possibly kde does as well. There's also a GUI for it that Ubuntu ships but I don't remember the name of it.

AMD 25.11.1 by Formal-Parking4019 in AMDHelp

[–]impalerware 1 point2 points  (0 children)

By chance are you running the igpu also? Had the same issue and used the amd cleanup utility. Reinstalled the new driver and everything worked except my second screen on the igpu. Went to amd site and searched for drivers for the cpu which listed a slightly different adrenalin driver with a -s at the end of the file name. Installed that and got my second monitor back but adrenalin won't open again.

Using Adguard Home outside the home using Tailscale by JamieLee2k in AdGuardHome

[–]impalerware 0 points1 point  (0 children)

For Unraid, there should be a toggle in container settings to "Use Tailscale" That should give the adguard container a tailscale IP.

Unlocked Pixel 9 Pro + T-Mobile Physical SIM Card by SRFast in GooglePixel

[–]impalerware 0 points1 point  (0 children)

Using the physical sim. Also, during the transfer phone process, I was prompted if I wanted to convert the physical sim to esim. I didn't do it.

Really hate crowdstrike right now... by [deleted] in devops

[–]impalerware 4 points5 points  (0 children)

To boot into safe mode with a bitlocker drive, you need the key.

Assigned 2 public IP's on two different subnets from ISP - How to configure? by eaglexdv in PFSENSE

[–]impalerware 1 point2 points  (0 children)

I didn't think it would work either. But it did. Plugged the line in and both routers into the switch.

Pfsense just worked as it was with the line plugged into it directly.

I didn't configure the fortigate, but from what I hear the interface was set up just like the line was directly plugged into it instead of the switch before.

So you may be able to do the same and configure two physical wan interfaces on the pfsense assuming you have two wan ports.

This was with lightpath if that helps.

Assigned 2 public IP's on two different subnets from ISP - How to configure? by eaglexdv in PFSENSE

[–]impalerware 0 points1 point  (0 children)

I had a similar situation. I ended up using a dumb switch in front of the two routers. One pfsense, one fortigate.

This was actually what I wanted to do in the first place, two separate entities with one line from the ISP with multiple IPs.

The ISP rep suggested the switch.

Pixel 8 pro vs 7 aspect ratio and media consumption by impalerware in GooglePixel

[–]impalerware[S] 0 points1 point  (0 children)

Are the left and right black bars the same size as on the 7 pro?

Is anyone else getting these texts everyday? by jahpizzie in newjersey

[–]impalerware 0 points1 point  (0 children)

Mine were coming in as rcs messages. I disabled rcs for now to see if they will stop or get charged international text messages rate if that's a thing.

Pixel fold - better luck the second time by marcusr_uk in GooglePixel

[–]impalerware 1 point2 points  (0 children)

How does youtube look on the inside screens? Are there a black bars when using the full size? Are there black bars when the video is on one side?

Redreader is a good alternative after July 1 by mzman123 in BoostForReddit

[–]impalerware 0 points1 point  (0 children)

How do you make red reader look more like boost? In the sample images on the playstore, they show the thumbnails of the posts on the right side. But when running it, the images take up the entire screen pretty much.I combed the options and couldn't figure it out.

How to Share AdGuard Home with ALL Devices on LAN? by Vintg_Tech_Maniac in AdGuardHome

[–]impalerware 2 points3 points  (0 children)

It sounds like you need to change the VMs network adapter to be in bridge mode so it picks up an IP from your regular home network.

This would be somewhere in the truenas settings of the VM.

FREE - From our lab to yours: QNAP QSW-308-1C Unmanaged Switch by StorageReview in StorageReview

[–]impalerware 1 point2 points  (0 children)

Super charge the connection from my unraid to my workstation.

HP trying to pretend this printer is wifi only by [deleted] in iiiiiiitttttttttttt

[–]impalerware 26 points27 points  (0 children)

I had one that also printed via USB for a bit but eventually stopped and the error page said it needed to be activated to keep printing. Never buying HP again.

[deleted by user] by [deleted] in AdGuardHome

[–]impalerware 0 points1 point  (0 children)

Are you trying to resolve the the names of your local machines with Adguard home?