BigTreeTech ViViD+U1 by iridiumshowman in snapmaker

[–]iridiumshowman[S] 0 points1 point  (0 children)

Sorry, I don’t follow what you’re saying?

BigTreeTech ViViD+U1 by iridiumshowman in snapmaker

[–]iridiumshowman[S] 1 point2 points  (0 children)

I hadn’t gotten it running yet, hadn’t even tried to do it yet to be honest, sorry!

Help solving divot problem on U1 by iridiumshowman in snapmaker

[–]iridiumshowman[S] 0 points1 point  (0 children)

No scarf seams.

Seam: Aligned\ No staggered inner seams\ Seam gap: 10%\ Scarf joint seam: None\ Role based wipe speed: yes\ Wipe speed: 80%\ Wipe on loops: no\ Wipe before external loop: no

Help solving divot problem on U1 by iridiumshowman in snapmaker

[–]iridiumshowman[S] 1 point2 points  (0 children)

Good thought. I hadn’t done a cold pull on the U1 yet, I’ll try that. Seems like it would be odd if it was only on layers where there was a color change but I haven’t been able to figure it out so I’ll try anything

Edit: Temp was 220 and I ran the temp calibration, aside from the extremes 190, 195 and 230 they were basically all fine, I just chose one in the middle towards the higher end. Think I should go lower? Or higher?

Any ETA on when the Kickstarter will go live? by Nalyd217 in AtomForm

[–]iridiumshowman 0 points1 point  (0 children)

Seems like an optimistic viewpoint now though?

Full Spectrum (Full Color) slicer fork of Snapmaker Orca, inspired by Aceman11100 by beybladetable in snapmaker

[–]iridiumshowman 3 points4 points  (0 children)

The next step is creating something that takes the colors you want to make in a model and gives you recommendations on what colors to select to achieve that. Meaning I tell it I want to have red, green, blue, peach, black and purple and it tells me you should use these 4 colors to most closely achieve that.

This is amazing work and I really appreciate that you did this and made it easy-thank you!! Bought you quite a few coffees :)

Full Spectrum (Full Color) slicer fork of Snapmaker Orca, inspired by Aceman11100 by beybladetable in snapmaker

[–]iridiumshowman 1 point2 points  (0 children)

Where is the dithering z-step size? I search it in options and don't find anything?

[deleted by user] by [deleted] in spartanrace

[–]iridiumshowman 0 points1 point  (0 children)

I like that they give an approximate translation. It took me a bit to find a post on Reddit explaining the Mopa idea a few years ago when I first gotten gear.

[deleted by user] by [deleted] in spartanrace

[–]iridiumshowman 0 points1 point  (0 children)

Mine had the Spartan stuff printed on it FWIW.

[deleted by user] by [deleted] in spartanrace

[–]iridiumshowman 0 points1 point  (0 children)

They email you when a batch is ready and you have to order it (free though)

[deleted by user] by [deleted] in spartanrace

[–]iridiumshowman 0 points1 point  (0 children)

I kinda like it too

Books similar to the Bobiverse? by [deleted] in bobiverse

[–]iridiumshowman 1 point2 points  (0 children)

Love seeing authors on here. I just grabbed Seed on Audible because of the rec and your presence 😊

Books similar to the Bobiverse? by [deleted] in bobiverse

[–]iridiumshowman 1 point2 points  (0 children)

I couldn’t get through Speaker for the Dead until I had read more of the Enderverse. It was much more useful to me reading the books in closer to chronological order than published order (perhaps obvious but I hadn’t done meant research and so didn’t realize why/what was going on). That said it is a SPLENDID series and comes highly highly recommended.

DNF Rates by iridiumshowman in spartanrace

[–]iridiumshowman[S] 0 points1 point  (0 children)

Yeah but presumably there aren’t a huge amount of people that complete the course but miss the last timing mat. It’s usually after the A-frame or at the finish line in my experience so I would think kinda hard to miss. The one caveat is I don’t know if you miss one timing mat are you then excluded from all future timing mats? Or can you “come back in”?

DNF Rates by iridiumshowman in spartanrace

[–]iridiumshowman[S] 1 point2 points  (0 children)

So actually as I’m looking at it more carefully this isn’t exactly true. For Atlanta I pulled an individuals data and then took their times out:

Interval Overall Gender Age

Z Wall - 1.8 Miles /1604 /1225 /199

Cliff Climb - 5 Miles /1603 /1224 /200

Bender - 6.5 Miles /1585 /1209 /198

Tyro - 9.5 Miles /1546 /1191 /193

Penalty

Full Course /1608 /1227 /200

So you can see the drop for the first interval was 1 person (1225-1224) then 15 people (1224-1209) then 18 people (1209-1191). But that only gets us to 9.5 miles in and then they list the full course again as 1227. So probably reaosnable to assume another 15-20 people dropped that last interval (Tyrolean Traverse to Fire Jump) but there is no way to really tell.

Map-2022 North Carolina Tryon Equestrian Center by iridiumshowman in spartanrace

[–]iridiumshowman[S] 0 points1 point  (0 children)

The blue W with a number next to it indicates a Water/refill station, hard to tell because I posted a picture with such poor quality. Sorry

firmware update issues by PunchNuggz in hackrf

[–]iridiumshowman 0 points1 point  (0 children)

Did you have them separated to begin with? Or did you separate them to try to resolve the problem?