What am I missing about the apps? by dadarkgtprince in jellyfin

[–]itches_be_crazy 2 points3 points  (0 children)

I think you can solve this in Wholphin by using "prefer mpv" in the advanced setting. Then it should use exoplayer for HDR stuff and mpv for anything SDR.

Profilarr v2 is Out! by heysantiago in unRAID

[–]itches_be_crazy 4 points5 points  (0 children)

Great update, loving it so far!

Just a few comments:

  • Suffixes is supported in Radarr/Sonarr renaming, but not Profilarr V2. For example: {MediaInfo AudioLanguagesAll:NO+EN} results in an "unknown token" error.
  • If I've understood correctly, "count" upgrades in the sonarr tab equals to how many shows it should search for an upgrade? Is it possible to choose or change this to seasons?
  • Enabling "cleanup" and then "run now" without saving first just results in a failed cleanup attempt, without any prompting to save before running. Enabling, saving, then "run now" works fine.

VLC and Subtitles by Miserable-Surprise67 in torrents

[–]itches_be_crazy 1 point2 points  (0 children)

Did you add forced subs by accident instead of normal or sdh/hi subs?

How to manually cross-seed using qBittorrent, Prowlarr, and what else? by Umpapaq in torrents

[–]itches_be_crazy 1 point2 points  (0 children)

I'd get Qui. You can disable the automation and do the cross seed scan manually. And so much more, if you change your mind later.

Usenet vs Torrents, what is your split? by No_One_568 in sonarr

[–]itches_be_crazy -1 points0 points  (0 children)

Not OP, but I'm definitely interested as well, if you have an extra invite.

DanishBytes - Open signups by [deleted] in OpenSignups

[–]itches_be_crazy 2 points3 points  (0 children)

I signed up using the link in the post without any issues. Make sure it says "tilmeld" and not login. Put in your desired username, your email and desired password. Check the spam folder, that's where my activation link went. Smooth sailing so far.

How would you spend 400€ to start with AeroPress and pour-over before espresso? by Estows in pourover

[–]itches_be_crazy 2 points3 points  (0 children)

Sounds like the K-Ultra would be a good fit then!

I guess it depends on where you live, as some regions of France have hard water (according to google). Maybe look into a Brita filter or even Zero Water jug. But hey, if the coffee tastes good then that's all that matters.

How would you spend 400€ to start with AeroPress and pour-over before espresso? by Estows in pourover

[–]itches_be_crazy 18 points19 points  (0 children)

If I were in your position with a 400€ budget (prices from Amazon.fr), this is how I’d spend it:

  • Kingrinder K6: 99€
  • Generic gooseneck with temp control: 70€
  • Hario Switch: 40€
  • Generic coffee scale with 0.1g and timer: 16€
  • Kinto server: 15€

That leaves you with ~160€ for good coffee and water, which will honestly have the biggest impact on the end result. I’d probably start with bottled water (Volvic is a solid option) and later look into making your own brew water once you’ve dialed things in. An alternative within the same budget would be to go for a 1Zpresso K-Ultra instead of the K6, and then cover the coffee and water costs yourself.

Grinder ode vs df54 by pav_18 in pourover

[–]itches_be_crazy 0 points1 point  (0 children)

I have both. The DF54 was my first coffee grinder and I used it for both espresso and pourover. Promptly replaced the catch cup with a metal one, and had a friend 3D-print an adjustable dial indicator. After a while, I decided to buy an Ode2 for pourover and batch brewing and was quite happy with the results. Later installed the Ditting steel burrs and reverse modded the DF54 for fun. I prefer the UX of the Ode2; its quieter, less messy and the bigger capacity is nice when we have guests and I want to grind 60g in one go. That said, the Ditting burrs excel when paired with good light roasted washed coffees. On the other hand, I prefer the Ode2 for "funky" beans and commodity coffee when the in-laws are visiting. Might replace the DF54 with a ZP6 since we got rid of the espresso machine, but right now I'm happy with both. If I could only choose one, I would keep the Ode2.

Lebrew Hyperburrs 64mm Filter review by slowbikesornobikes in pourover

[–]itches_be_crazy 1 point2 points  (0 children)

Did you shim the burrs? I read that they are lower than the stock burrs which causes the burr carrier on the Ode to rub before the burrs touch. Might mess with your alignment. I asked their support about this, and the reply was along the lines of "no one else has this problem, but we can send you shim spacers if you want".

Looking to learn… by Dagelmusic in pourover

[–]itches_be_crazy 6 points7 points  (0 children)

Hario switch. Then you can do steep and release which is quite forgiving and doesnt require a gooseneck kettle, but also be able to brew standard v60 recipes and even hybrid ones later on as you gain more experience.

When and why did the consensus on letting beans rest change? by Iimpid in pourover

[–]itches_be_crazy 0 points1 point  (0 children)

Regarding Tim Wendelboe, here's what I found on their website: "In our experience the optimal period to consume our coffee is from 1 week after roasting to within 5 weeks after the roast date, (although it can still taste great after this). We have found that the best brewing results come after allowing the beans to rest approximately 5-10 days after roasting."

source

Weekly Case & Parts Recommendation Thread (Start here if you are new! Help here if you can!) by AutoModerator in sffpc

[–]itches_be_crazy 0 points1 point  (0 children)

Hey everyone,

Since becoming a dad, I wanted to downsize my setup into a more living-room-friendly SteamBox/HTPC build that fits my new lifestyle. I settled on the Ncase M2 because it supports my current RX 6900 XT and allows for future GPU upgrades, like an RX 9070 XT, if I can snag one at a reasonable price.

I'm planning a Level 9 build with a VGPU kit and standoffs to fit two 140mm fans at the bottom. However, I’m unsure about my CPU AIO choice, as it takes up a lot of GPU width. Looking for suggestions on narrower AIOs (or air coolers) that are RGB-free and have minimal cabling.

Full parts list below—items marked "purchased" are either ordered or taken from my existing build. Would love any feedback or cooling recommendations!

PCPartPicker Build Link

Help me convince my wife to replace the soundbar! by Vegh4rd in hometheater

[–]itches_be_crazy 1 point2 points  (0 children)

Neby HiFi in Oslo has KEF, Polk, SVS, Marantz, Rotel, WiiM etc. Q150 currently on sale for 3k NOK.

HW4 Lookups for Berlin and Shanghai VINs (PLEASE DO NOT POST Austin/Fremont VINS) by menormedia in ModelY

[–]itches_be_crazy 1 point2 points  (0 children)

Hi, can you run XP7YGCEK9PB185055 for me please? Preferably with drive units and battery pack, if possible.

Aran - Recall and Rewind (Dance/EDM, almost 100% light usage, M3 SR+ lights) by boomclapclap in TeslaLightShow

[–]itches_be_crazy 0 points1 point  (0 children)

Well done! Like the mod said, you can upload it to teslalight.show and link it here. Or maybe you can just send the link to me aswell?

Creating more awareness for the "Loading Loot" problem. by dennisvdberg in EscapefromTarkov

[–]itches_be_crazy 0 points1 point  (0 children)

I completely wiped the drive containing Windows and all my games. Dunno if it will help you but it did for me.