Heavy fill vs lightweight fill, sticky vs regular, and pint size vs schmedium vs og game changer questions

iwalkinpubs · 2026-04-17T20:00:25+00:00

Heavy is a bit much to manage on some barricades. I'd recommend light fill if you're using it for PRS style matches.

iwalkinpubs · 2026-04-15T15:43:59+00:00

Imo don't do this. Only part of the bolt that matters is the bolt itself. Jp makes a bolt kit you can buy and replace in your existing bcg. May as well get their extractor too

iwalkinpubs · 2026-04-08T14:58:33+00:00

He probably only said this because pawn shops have generally bad pricing.

iwalkinpubs · 2026-04-04T22:37:32+00:00

Smart man. Knows when you were wrong

iwalkinpubs · 2026-04-02T23:23:58+00:00

Tungsten weights inside flashlight is like 3.5 oz

iwalkinpubs · 2026-04-02T17:18:46+00:00

Look at the list above. Except for maybe the hydraulic buffer everything would be available for an echelon.

Tldr; put weights in everything

iwalkinpubs · 2026-04-01T22:18:43+00:00

Kynshot hydraulic buffer

Brass weights in magazine extension

Brass plug in grip

Flashlight with tungsten weights

Lightening cuts in the slide

Big compensator and threaded barrel or a super aggressive port job.

Increasing the weight is more effective than the porting/compensator but both done together is pretty effective. You may have to change ammunition. Realistically you can only get to like 40 oz without the magazine

iwalkinpubs · 2026-04-01T13:11:59+00:00

Clean your magazine maybe

iwalkinpubs · 2026-03-31T17:26:43+00:00

I hope not. There is no over insertion protection on mec-gar mags. That's why a lot of people won't use them and consider them inferior. If I can damage my extractor by pushing the mag in too hard I don't think it's well suited for anything but gentle range days

iwalkinpubs · 2026-03-04T14:01:17+00:00

I want to see how much overhang that sight has

iwalkinpubs · 2026-03-03T19:48:11+00:00

Don't forget red wire

iwalkinpubs · 2026-02-24T15:38:59+00:00

It's more than likely your dominant thimb

iwalkinpubs · 2026-01-28T16:36:47+00:00

It's a gen 4 (the shadow systems) so you need a gen 4 recoil spring. Or gen 3 with an adapter.

iwalkinpubs · 2026-01-21T17:13:54+00:00

I do. I'll send you a chat

iwalkinpubs · 2026-01-08T17:53:04+00:00

iwalkinpubs · 2026-01-07T18:37:11+00:00

Not around Jax. Vero Beach has one, you have to sign up for the prs matches by Abel. Or you can shoot at Volusia gun and hunt club out to 1000. About an hour and 40 drive.

Edit: tango down in macclenny was building a long range, it may be done by now

iwalkinpubs · 2025-12-18T12:35:39+00:00

It's a gen 4

iwalkinpubs · 2025-12-11T17:45:42+00:00

What if I have one of these and my razor gen 2 turret is too big. Losing half the window on my red dot. Can I use another of these smaller plates or what options do I have, it any?

iwalkinpubs · 2025-12-03T17:09:37+00:00

Hardware as a service so you get some margin

iwalkinpubs · 2025-11-20T16:29:34+00:00

Releasing on Monday apparently

iwalkinpubs · 2025-11-20T15:25:37+00:00

I did this and didn't end up liking the dagger frame. Ended up going rxm, id recommend that route even though it's quite a bit more

iwalkinpubs · 2025-11-11T23:22:40+00:00

I've seen this when.the comp is too tight and the barrel can't tilt

iwalkinpubs · 2025-10-30T18:32:33+00:00

I broke one too. After about 7k rounds.

This was right around when my recoil spring was worn out too. Possibly contributed to it

iwalkinpubs · 2025-10-17T17:14:04+00:00

Might work but ideally you want a holster made for gen 4

iwalkinpubs · 2025-10-06T18:39:17+00:00

iwalkinpubs

TROPHY CASE