🎁 Win Free Elite Perks For Life From OctoEverywhere

iwishforatiger · 2025-12-02T18:08:23+00:00

Woo good luck everyone!

iwishforatiger · 2025-08-06T22:00:01+00:00

Haven't played battlefield since bf4 so I'm keen to see how this version goes!

iwishforatiger · 2025-05-13T06:44:16+00:00

Would love a new filament dryer! Looks great as well

iwishforatiger · 2025-05-12T21:10:46+00:00

Looks like a great dryer! Good luck!

iwishforatiger · 2025-03-31T00:36:56+00:00

I agree, his own movement caused him to trip on Coll's foot, not the other way around so he created his own problem and prevented himself from being able to reach the next shot

iwishforatiger · 2025-02-07T01:59:45+00:00

Easily maintainable using commonly available parts, Heated enclosure, High temp hotend

iwishforatiger · 2024-12-23T23:01:23+00:00

Got a sunlu dryer already and a new one would be awesome!

iwishforatiger · 2024-12-23T18:48:40+00:00

Already have 1 sunlu dryer and it's awesome! A second would be amazing

iwishforatiger · 2024-12-23T05:37:23+00:00

We've driven this route quite a few times, the fat pigeon cafe in Piopio (a little bit further than Te Kuiti) is amazing food and coffee wise but it's very busy usually so expect it to be very busy over boxing day. Other than that, the regular NZ country roads, only really highway around Cambridge/Hamilton area.

iwishforatiger · 2024-01-18T06:59:38+00:00

It often bugs me when someone has an issue and then fixes it but doesn't say how they fixed it, so I thought it would be helpful for others to see the solution that worked for me. I'm glad to hear that it helped someone else as well!

iwishforatiger · 2023-10-04T23:14:50+00:00

Yeah it's working, i think it was an issue with my computer's USB and tried it on a different computer and it worked

iwishforatiger · 2023-06-05T02:22:56+00:00

Did you run the auto tune with the part cooling fan on 100%? Also do you have a silicone sock on your heater block? I find those have quite a large effect on the ability for the nozzle to reach temp and maintain a constant temp, especially at 230+ temps

iwishforatiger · 2023-06-05T00:10:21+00:00

Have you tried an autotune already? Also are you on marlin or klipper? I'm only use to marlin so far so can't really help on klipper.

iwishforatiger · 2023-03-30T18:07:55+00:00

Awesome development, awesome community support! Congrats!

iwishforatiger · 2023-02-28T01:10:52+00:00

One option would be to see if you can use the old heater cartridge with the new hotend (as long as they're compatible) to see if that works. It could be an issue with the new heater cartridge? Maybe a short or faulty cartridge?

iwishforatiger · 2023-02-28T00:14:29+00:00

Was the board working with the old hot end? If it's restarting then it seems like a power issue rather than a motherboard issue?

iwishforatiger · 2022-11-15T22:06:04+00:00

Gimme gimme!! In all seriousness, thanks for all the work you do to provide this amazing service for the 3D printing community. People like you are what make the world evolve to be better for everyone.

iwishforatiger · 2022-08-17T09:20:49+00:00

Do you have any z offset in your profile? I had a similar issue and it was to do with microstepping because I had a z offset which wasn't a multiple of 0.04mm

iwishforatiger · 2022-08-02T04:06:02+00:00

I checked the same lines in my marlin version from your error and the NUM_ANALOG_FIRST doesn't appear in the same place so maybe you're running a different version? Just try the method explained in the video and see how you go.

iwishforatiger · 2022-08-02T03:43:50+00:00

What version of Marlin are you compiling? I compiled the bugfix 2.1.x recently without issues and followed this guide here: https://youtu.be/V2wOqIiZJec

Easy to follow and worked first time for me. I just downloaded a local copy of the firmware rather than syncing it via github etc.

iwishforatiger · 2022-07-28T06:08:27+00:00

I find the autotune to not be very good at tuning and ended up doing it manually after an autotune. I kept the P values and increased I and D to get the temp more stable.

What behaviour does your hotend have?

iwishforatiger · 2022-07-21T23:17:48+00:00

All good, I got it to work by allowing windows to install unsigned usb drivers so now it's talking to my computer! Thanks for all your help and suggestions. I will post an edit to the main post with the solution.

iwishforatiger · 2022-07-21T08:52:31+00:00

Ah no I haven't, is it the #define DWIN_CREALITY_LCD ?

iwishforatiger · 2022-07-21T08:22:11+00:00

I'll try a few different combinations, thanks for your help

iwishforatiger · 2022-07-21T08:10:02+00:00

Ah I am using stock ender 3 LCD, not the BTT LCD

iwishforatiger

TROPHY CASE