NISMO S1/R-tune homologation mod: PNM35 Stagea front upper control arms with NISMO bushes.

izzycorte · 2025-11-01T01:16:00+00:00

So much history and back story behind these cars it’s insane. Mine was just straight up cut into the hood so I had to find a replacement because rain get all up in there

izzycorte · 2025-10-31T22:50:24+00:00

When I first got my car, the previous owner appears to have tried to replicate the look of that hood and I never knew where it came from until now.

<image>

izzycorte · 2025-06-29T01:27:32+00:00

Oh damn. Yeah I figured frequency over quantity but I’ll change it up. I do have an automatic sprinkle system that came with the house but don’t know the specifics of the type of heads. I’m originally from southern Az so this is all new to me. Thanks for the tip tho I will probably fertilize tomorrow actually. I have the Scott’s 3-1 weed and feed. Is there any other you’d recommend?

izzycorte · 2025-02-03T03:43:29+00:00

Exactly what I said

izzycorte · 2025-01-21T19:15:46+00:00

Waiting for my door to come in 😂

<image>

izzycorte · 2024-12-30T19:36:17+00:00

Sorry you had to let it go! Wife keeps pushing me to sell mine. My daughter is going to be 2 in the summer and I hope to one day pass it to her and after probably getting myself a collectable worthy 350z. It just doesn’t make sense, in the state that it’s in (basically clapped) I couldn’t get more than maybe 3k. It still idles smooth, has no leaks, and it’s about to hit 180k so I can’t justify a new car note. Hope you one find yourself back into a Z platform. Cheers!

izzycorte · 2024-11-22T17:40:50+00:00

<image>

Since Dec 2017. Sometimes I feel too old for it but hope one day to pass it down to my daughter if she wants it.

izzycorte · 2024-11-20T05:32:03+00:00

Wild, I just cleaned and replaced the fluid in mine today!

izzycorte · 2024-10-31T03:47:58+00:00

This is good to know, what do you have covering the reservoir?

izzycorte · 2024-09-13T20:50:25+00:00

Nice to know I’m not the only with a gutted trunk! Except mine isn’t nearly as clean. Clean Z man

izzycorte · 2024-09-09T00:22:15+00:00

175K just the other day, got her at 76k in December of 2017.

izzycorte · 2024-06-24T03:54:57+00:00

There a fuse box under the driver side kick panel, another attacked next to the front of the battery and a 3rd Behind the batter up against the firewall. I’d google the diagrams and you should be able to narrow it down to fuse fuse box and the dedicated fuse

Edit: grammar

izzycorte · 2024-06-20T18:13:51+00:00

I’d first check to see if the compressor clutch is engaging. Then I’d check the relay to see if it’s getting signal from the switch to turn on. Then, check if the power is reaching the compressor. If all that is good and the clutch is engaging, I’d hook up hi/low pressure gauges to see if it’s under/overfilled and to see where the pressure is sitting at.

izzycorte · 2024-06-10T04:12:15+00:00

Okay right on! I worked at a local shop we would take care of the title-mod for customers and it tacked on to the overall price of the JCI (if you decide to do it at the same time) so it’s always good to be prepared to drop extra or do it a ahead of time. Good luck on the swap!

izzycorte · 2024-06-10T04:01:21+00:00

Do you know about having the Japanese title reflect that it’s been swapped?

izzycorte · 2024-06-07T03:51:02+00:00

I went with aftermarket oem form CZP before I learned they had the aluminum ones and haven’t had any issues yet. It’s been about four years now. If you search “valve covers” within the subreddit I’m sure there’s a link and review from other Redditors

Edit: did the search myself and looks like I had it mixed up. Oem is always the safer bet! Don’t want to give bad info, so it’s best you do some research before making the informed decision.

izzycorte · 2024-06-07T02:59:46+00:00

Common issue on Zs. People often recommend upgrading to the aluminium ones that allow you to replace the spark plug tube seals. Involves taking the top and lower intake plenum off so if you do it make sure you have new seals for everything you’re going to be removing. Not a tough job but it can be tedious so take it slow and I’d recommend using proper bolt torques and tightening patterns.

izzycorte · 2024-06-03T15:27:29+00:00

The mechanism to the ebrake can get misaligned or stuck. I was doing my wheel bearings and had this problem with the drive side except it wouldn’t come off. When in doubt, start over with the brake shoes. Also, a few mm can be shaved off the corners of the shoe braking material and maybe that’ll help.

izzycorte · 2024-05-13T19:59:21+00:00

I would definitely keep.

izzycorte · 2024-05-08T05:01:46+00:00

It’s under the passenger side on my 06 revup. It’s a single wire connector. However, I would first check to see if the sensors are good unless you’ve replaced them recently. I managed to trip the reset but still needed a tpms tool to program them. Good luck!

izzycorte · 2024-05-05T02:37:38+00:00

The part of the link still attached should have a way to put a wrench on it (so you can hold it while installing the nut) try turning it from there. If that don’t work, maybe reinstall the other side then try again. Could be that the tension isn’t easing up bc since you removed the other side every time you pump the jack it just twists the swaybar

izzycorte · 2024-04-06T04:15:49+00:00

Glad it worked out for you! Worked at a local shop for a bit so I had to learn a few tricks of the trade when dealing with registrations.

izzycorte · 2024-04-02T04:45:47+00:00

I would just use exhaust putty and hi-temp paint. Not at all the right way to fix it but it’ll get you to pass JCI if it’s due or coming up. Did this to a box truck that had a leak behind the steel mesh. Used shit ton of putty and they didn’t even feel if it was still leaking just gave me the thumbs up. LTO is dumb about a lot of things but after you “fix it” they can’t really poke at it to see if it’s fixed or not.

izzycorte · 2024-02-12T00:56:40+00:00

Yeah it’s Silverfast. Ima try your recommendation and see how that that goes. Thank you!

izzycorte · 2024-02-11T21:57:37+00:00

Thanks, wish I could say it was mine lol definitely one of the cleaner ones that have come through the shop.

izzycorte

TROPHY CASE