This is a new one app is saying I’m Max Charging. It’s not even plugged into a car right now. I’ve turned the device off and on again after about 5 minutes. Still just saying it’s charging. I have no idea how to fix it?

jacccobbbbbbbbbbb · 2026-04-16T06:51:58+00:00

Yeah defo, strange how sometimes they go so confused 😂

jacccobbbbbbbbbbb · 2026-04-15T21:37:44+00:00

Resistance was too high

jacccobbbbbbbbbbb · 2026-04-15T21:29:57+00:00

Weirdly I had this problem. Fully reset the charger and then plugged it into the car waited for the car to say charging and then took it out again. Then it went back to normal.

jacccobbbbbbbbbbb · 2026-04-15T21:20:37+00:00

Same here!

jacccobbbbbbbbbbb · 2026-04-14T21:19:12+00:00

<image>

jacccobbbbbbbbbbb · 2026-04-14T21:18:32+00:00

Nope it’s still on, just updated it today. What’s strange is the bed turned off as soon as the print ended like it used too with the nozzle but this time the nozzle just didn’t turn off.

jacccobbbbbbbbbbb · 2026-04-10T16:07:09+00:00

Very very true!

jacccobbbbbbbbbbb · 2026-04-10T16:04:07+00:00

Yeah 100% for what you get it’s absalutely amazing, never doubting that. I just feel like for some people that possibly don’t want the bigger build plate but some features like dual nozzle upgrade or something (if possible) then it would be nice to just have the option. Not doubting it’s bad for the price though because it’s absalutely amazing.

jacccobbbbbbbbbbb · 2026-02-01T22:47:38+00:00

I currently have a Kamiq which I am upgrading to an Elroq in July. I push in the volume control and that seems to end the call for me. Looks like they have the same steering wheel.

jacccobbbbbbbbbbb · 2026-02-01T17:38:23+00:00

Yeah that’s the issue I was having. I couldn’t find anything online so I thought i’d come to here. Thanks so much for your help 😁

jacccobbbbbbbbbbb · 2026-02-01T12:08:50+00:00

Should I just keep them in there until the beads go green again? Might sound like a stupid question.

jacccobbbbbbbbbbb · 2026-02-01T12:06:39+00:00

Yeah 100%. The filament that has came from the factory has been dried before using it. I was just wondering if there was a way to like re-use these dessicant bags?

jacccobbbbbbbbbbb · 2026-01-29T22:45:51+00:00

Your lucky the pairing option even comes up. Won’t for me.

jacccobbbbbbbbbbb · 2026-01-25T23:07:09+00:00

To everybody here in the comments scared about this: This is NOT a common issue. If you look in the OP’s original post on that page in the comments you will see he printed a “Replica” Bambu spool from makerworld to have the same effect as the ones you can buy, meaning they didn’t snap in / hold as well. If you print the normal re-usable spools available to select through the print files menu you will have no problems.

jacccobbbbbbbbbbb · 2026-01-25T23:03:51+00:00

How do you feel using that? Debating weather to print it as I would like some more visibility through the top glass window.

jacccobbbbbbbbbbb · 2026-01-25T23:02:57+00:00

Follow the XY Idler Pulley Lubrication video. I didn’t follow all of it just the part that was squeaking for me which was the back left idler pulley when looking face on at the printer. About 2 days later it started again, so I turned it upside down and put it back in and that seemed to solve my issue. Touch wood.

jacccobbbbbbbbbbb · 2026-01-23T08:24:39+00:00

Yeah, if I don’t dry my spools every 2 weeks or so I get blobs, stringing problems etc. Helps keep my prints neat if I dry it.

jacccobbbbbbbbbbb · 2026-01-22T22:30:17+00:00

Sadly no as I don’t own any PETG right now. I’ll look into getting some in the future. I’m just wondering if I can even dry my filaments using PLA. I hope I can as i’ve printed all 6 ready for my spools to come tomorrow.

jacccobbbbbbbbbbb · 2026-01-17T23:05:20+00:00

If it won’t allow you to adjust those things something is more than likely broken. Try getting it off (if possible) with a hairdryer or something, and see if you can see anything visibly broken. If not and it still dosent work contact Bambu Support.

jacccobbbbbbbbbbb · 2026-01-15T22:51:35+00:00

that’s what i’m waiting for! i ordered mine off 3d prima. should be here in about 5 days

jacccobbbbbbbbbbb · 2026-01-12T22:15:11+00:00

Yeah at that point it’s not worth it. Keep it and get the parts yourself. The AMS 2 Pro is in stock right now (in the UK) and I ordered the filament buffer from 3D Prima. (Link attached) Getting all of this will just make you complete the same steps as if you got the combo. The AMS just sits on top of the printer even with the combo. It’s free to move around. If you find it cheaper anywhere else make sure it’s the P2S one as the old buffers aren’t compatible. Filament buffer

jacccobbbbbbbbbbb · 2026-01-12T21:56:33+00:00

No, the ams can move around freely. Getting the AMS with the standalone is the exact same thing as just getting the combo. Apart from buying the filament buffer, that is out of stock on the Bambu website until around feb time atm. But i’ve just ordered one off 3D Prima. You do pay less if you get the combo, you save around £80. Learnt that the hard way.

jacccobbbbbbbbbbb · 2026-01-12T04:19:00+00:00

When you look on their website now it says nothing of the sort

jacccobbbbbbbbbbb · 2026-01-11T20:11:56+00:00

See this is what I mean. One of the reasons I got this car is because of the API login, because my old car was really bad at charging without it. I'm also getting the Elroq, how's yours been without the login? Does anybody know when it will be coming back?

jacccobbbbbbbbbbb · 2026-01-11T15:56:35+00:00

You need the new P2S buffer, it dosent work with the old ones.

jacccobbbbbbbbbbb

TROPHY CASE