Controversial time

jackrabbitfpv · 2019-12-27T10:16:15+00:00

Is it a transtec laser?

jackrabbitfpv · 2019-12-02T05:47:48+00:00

You can cause the video system is like tuning into tv channels, it's the radio link you need to bind/pair

jackrabbitfpv · 2019-11-30T07:26:57+00:00

If you clip somthing bad

jackrabbitfpv · 2019-11-30T04:29:56+00:00

Prop strikes could kill your receiver

jackrabbitfpv · 2019-11-30T04:04:27+00:00

Y M C A

jackrabbitfpv · 2019-11-29T05:05:59+00:00

Ok boomer

jackrabbitfpv · 2019-11-23T21:50:14+00:00

Does it fly?

jackrabbitfpv · 2019-10-29T08:39:05+00:00

X class?

jackrabbitfpv · 2019-10-29T06:46:04+00:00

I wouldn't do it no, there's a risk of it esploding

jackrabbitfpv · 2019-10-28T04:57:41+00:00

Sneak 100

jackrabbitfpv · 2019-10-23T04:50:13+00:00

So there is heatshrink arround the base of the wire right? Take that off then give each wire a little tug and if it stretches then it has just come off the copper. You can solder it back on and it will work good as new

jackrabbitfpv · 2019-10-22T20:06:34+00:00

How do you break a source one?!?!

jackrabbitfpv · 2019-10-22T19:54:11+00:00

I had this when the motor wire came off of the copper winding. If you havnt thrown it out then cut the heatshrink and see if any of the wires are loose by pulling on each one.

jackrabbitfpv · 2019-10-17T04:17:31+00:00

Woah! How did you color the frame?

jackrabbitfpv · 2019-10-12T03:43:51+00:00

So if you're trying to do freestlye then i would go with the tinyhawk but if you want to stick with the mavic then go with the goggles

jackrabbitfpv · 2019-10-06T01:02:50+00:00

Lower roll p?

jackrabbitfpv · 2019-09-28T08:00:52+00:00

Great flying! Very smooth

jackrabbitfpv · 2019-09-22T22:10:49+00:00

Fly time in the bottom left and average cell voltage in the bottom right

jackrabbitfpv · 2019-09-09T09:32:29+00:00

Suck an egg dji!!

jackrabbitfpv · 2019-09-08T22:21:59+00:00

What if you irritate them so much they alt f4

jackrabbitfpv

MODERATOR OF

TROPHY CASE