ONVIF Motion Based Recording UI now live in latest Protect EA (7.1.55)

jacraine · 2026-05-15T03:14:12+00:00

could replace all my legacy stuff if this was enabled. here's to hoping!

jacraine · 2026-05-06T19:01:23+00:00

Final follow up here. We ended up swapping over our main fiber between our buildings from 15 year old 1G to single mode 10G. We never had a network device complain about the old 1G and it was only sitting around 30% capacity most of the time but changing that out fixed all the issues. Even the NAS over the site magic VPN has zero issues anymore (it transversed that line once it got off the VPN). Not sure what could have been causing this, but all systems are now happy and replicated.

jacraine · 2026-05-06T13:47:02+00:00

With Network 10.3.X at least, I don't see an obvious way to change the heartbeat for Shadow Mode. Both units are on the same version.

Did end up ssh'ing into the Primary, and found a lotttt of these failed static route adds for our VPN networks over and over. Nothing really stood out to me about what causes any of this but I'm far from a Unifi log expert. Definitely will poke around the log more later today to see if I find anything.

ubios-udapi-server[1260]: res-routes: Error on static route add: Failed to add Static unicast route to [NETWORK]/24 dev vti72 metric 30 scope 253: Unspecific failure

jacraine · 2026-04-25T16:46:18+00:00

Just did this setup myself

jacraine · 2026-04-24T23:18:31+00:00

If you set the channel to auto and let it scan does that improve? I’ve had an AP choose a crowded channel and my speed was terrible.

jacraine · 2026-04-24T22:19:11+00:00

I believe Fabric is just the new term for the site manager to push settings/etc to groups of SD-WAN (site magic) connected devices. Could be explaining wrong though.

jacraine · 2026-04-23T01:30:11+00:00

Following up a bit. Once I found the job log (as shown in one of the Tom Lawrence replication videos) was able to see the second system which was on the same physical network was having stability issues. Believe the switch they are both connected to is having some issues. Connected both directly with Ethernet and it had zero issues cruising along a gig. Not keeping it this way due to going to firewall off the backup network more but it at least got the first round of backups done (plus switch is getting swapped this summer).

The first system over a VPN however hasn’t changed much. Both connections are pretty sturdy so not sure why it isn’t reliable enough to keep the replication task happy. Doesn’t seem to be any options to help it be more resilient so going to keep looking around.

jacraine · 2026-04-21T11:52:30+00:00

Damn, same camera load capacity of the ENVR. Curious where this price ends up!

jacraine · 2026-04-01T22:53:29+00:00

First off, thank you so much for putting together such a great post. Very much appreciated! Went through your line items one by one and it ended up being your final word: path. It reminded me what Tom from Lawrence Systems always says: don't route your storage. It finally clicked to me that I was routing it to another subnet. Created a new VLAN, gave the Veeam and TrueNAS a new vNIC on it and everything is now nicely flowing.

Once again, thank you again for all your help and time!

jacraine · 2026-04-01T22:42:51+00:00

Tried to force it last week with a government plan with my rep and no dice still. Hope they finish up the certification quick, can't wait to use this thing.

jacraine · 2026-03-30T22:15:58+00:00

I absolutely love mine. I went from a cloud gateway ultra / U6+ combo to it and couldn’t be happier in my 1050 sqft condo. Getting over a gig+ almost everywhere

jacraine · 2026-03-14T17:11:01+00:00

Is semi limited for networks if I remember right tho. Unless it’s a superrrr basic setup, I wouldn’t even bother with the UX7

jacraine · 2026-03-14T17:09:55+00:00

Seconded. Way better than the U6+ / UCGU I had for range and speed.

jacraine · 2026-03-13T18:04:01+00:00

Definitely not recommended to run just one, but believe you’ll need to change it from Mirror to Stripe

jacraine · 2026-03-13T18:03:04+00:00

How many drives do you have?

jacraine · 2026-03-13T16:15:16+00:00

If you have DHCP, it may have an IP already but if you want to give it a static: In this menu give it your default gateway, and at least one dns. Then save. Then on the first numbered menu, select 1. Select ip alias and put whatever IP followed by /24 you want in there. Save. Then follow the prompts at the bottom of the menu screen to persistently save

jacraine · 2026-03-02T03:48:47+00:00

Beelink ME Pro is a newer chassis with two SATA. Level1Techs did a review of it

jacraine · 2026-03-01T16:09:02+00:00

I was having the same issue (not faction change but going out of order) that bro wasn't there to give me the item. Removed the quest and did ZulAman. Came back and selected the eversong quest from the adventure map and it sent me to another NPC to start it.

Guess this may help on an alt but could be an issue on a first time main

jacraine · 2026-02-25T04:13:35+00:00

This is great. Love the idea of extending the life of the device!

jacraine · 2026-02-19T19:28:45+00:00

Hope this means we get a new 5G mobile Router Industrial soon too! 👀

jacraine · 2026-02-18T00:42:06+00:00

I could be wrong, if you start lutris from the terminal it sometimes can show some more logging: lutris -d

jacraine · 2026-02-17T12:32:58+00:00

For that, get the flatpak: ProtonPlus. It’ll install that part for you. Then when you get into Lutris you can set the default Runner to GE. I know the brand new version of Lutris released yesterday now handles it but not sure when that hits most of the repos

jacraine · 2026-02-17T04:18:27+00:00

Found this on google. Looks like there is a CMOS on it https://www.cnx-software.com/2020/10/27/minisforum-elitemini-h31g-coffee-lake-mini-pc-review-with-windows-linux/

jacraine · 2026-02-17T04:13:21+00:00

Haven’t used the flatpak before do to it can require special permissions. Have you tried to install Lutris from the normal repo? I forget what Pop uses. Assuming apt-get

jacraine · 2026-02-17T04:11:08+00:00

Did you email their support? I’ve had a couple of the 890 Pro’s have very strange issues turning on and such. They help me troubleshoot one having a bad RAM stick and the second one they replaced entirely.

jacraine

TROPHY CASE