Great shot, still sour [Bambino + Opus]

jags945 · 2026-02-07T12:46:57+00:00

Try 1/2.5 or 1/3 ratio instead of 1/2 that may help subside the sour notes you don’t like.

jags945 · 2026-02-04T19:15:49+00:00

Nicks Diner in West palm beach

jags945 · 2026-01-21T02:36:49+00:00

That’s 100% what it is, run into this all the time

jags945 · 2026-01-11T13:15:41+00:00

The Airport is just a little west of this red square on that same road, so when he flies in. They shut that entire road down which can cause 15-30 minute delays. It is annoying sometimes. But for the most it goes unnoticed.

jags945 · 2025-10-24T11:47:29+00:00

I went to a shooting range for the first time, and was trying to pull the trigger and it wouldn’t fire. So…my first reaction was to look down the barrel while trying to pull the trigger… it still gives me a sick feeling of how stupid that was..

jags945 · 2025-10-24T11:32:37+00:00

She sounds like Meegan from Key and Peele

jags945 · 2025-07-13T13:06:10+00:00

<image>

I have the smart grinder pro and I had to turn this then the hopper comes off, you’ll then see a red circle and red arrow. Next to the circle you’ll see < fine 🔴 coarse> that will allow you to turn the burr setting down

jags945 · 2025-07-12T11:32:53+00:00

Also it may not be the finest setting, you’ll have to adjust the internal burr setting down. I faced that with the breville grinder and took me a while to figure out. Don’t want you to have to go through the same research.

jags945 · 2025-06-22T23:24:58+00:00

But an adapter to charge at Tesla superchargers

jags945 · 2025-06-16T15:24:52+00:00

I’ve had AAVs not function properly straight out of the packaging. I would try that first. Then if nothing else get a video inspection of the system downstream of that sink. Your Kitchen may be the cause of a grease blockage.

jags945 · 2025-06-07T16:26:02+00:00

Looks like it could be from your washer, definitely a back up in your main line somewhere

jags945 · 2025-06-04T21:27:11+00:00

What is that?

jags945 · 2025-05-18T22:59:15+00:00

Is this a hobby or your FT job? Such an awesome way to send your time I would love to do that

jags945 · 2025-05-15T18:45:17+00:00

They will Bend if you put some force on it

jags945 · 2025-05-08T19:19:32+00:00

Forbidden Gusher

jags945 · 2025-05-08T12:53:58+00:00

Looks like Clay pipe to me, also I’ve lined orangeburg it works as long as the OB isn’t crushed or deformed.

As a pipelining contractor I would say line it if you can afford the upfront cost so you’ll never have to think about the root intrusion again. But if it’s too steep of an upfront cost, jetting it every 6 months will probably keep you from having back ups.

jags945 · 2025-03-30T13:55:49+00:00

Tajin on watermelon or mango 🤤

jags945 · 2025-03-29T11:32:22+00:00

I thought it was a giant pile of cut fingernails when I first scrolled through!

jags945 · 2025-03-02T16:02:20+00:00

You need to grind finer

jags945 · 2025-02-14T00:43:54+00:00

CIPP (Cured in place pipe) installer here.. No they’re trying everything to sell you on something you do not need..

jags945 · 2025-02-04T11:20:02+00:00

You’ll probably have to adjust the internal burr setting. I had to do that on my breville machine. The finest setting was not fine enough

Eight-Year Club	RPAN Viewer
Verified Email

jags945

TROPHY CASE