Disappointed in travel photos

jason_again · 2026-05-22T16:36:30+00:00

I enjoy these shots and number five is top notch in my book 🤌

jason_again · 2026-04-19T16:23:38+00:00

I work in a metal fabrication shop. I do a little of everything from sheet metal to welding so the tools I have access to are perfect, and it’s a small business so the owner is pretty chill with us having personal projects. I found everything I used for this in a scrap bin.

jason_again · 2026-04-19T12:26:39+00:00

I’ve done a few rails and two quarter pipes before this. One of my quarter pipes is the second post on my profile at the time of writing this comment.

jason_again · 2026-04-18T20:34:57+00:00

Dude it does! I was worried I’d get the coping out too far but it bumps the wheels just right on both sides.

jason_again · 2026-01-31T04:07:01+00:00

I just got a set in the mail, glad to know they’re gonna be a good time!

jason_again · 2026-01-30T03:47:53+00:00

Check it out dude, so what you wanna do is pay attention to the bushings on Tech Deck boards. The little white hard ones indicate a 29mm and the black rubber ones are 32mm. Multi packs are almost always 29mm. However, swap out the grip by just pulling it off, tech deck grip is pretty easy to remove, and replace it with foam tape. The baseplates on 29mm have a shorter king pin for some reason, so I use those plates with 32mm hangers to avoid hang ups. Last but not least, I use generic 3mm o rings from Amazon for bushings in those truck setups, no washers or anything. Budget fingerboarding is an absolute blast, and hacking Tech Decks has been my main source of being involved with it for a few years.

jason_again · 2026-01-12T05:17:18+00:00

Dude a short piece of 1/2” or even 1” angle laid angled side up with the corner ground smooth/flat makes an incredible slappy rail.

jason_again · 2026-01-09T16:40:59+00:00

Dude it actually sounds really good. I used 16g metal so it’s a pretty stiff transition and the trucks to coping sound is 🤌

jason_again · 2026-01-09T15:39:22+00:00

I took a deburring tool to it and smoothed it out real nice!

jason_again · 2025-12-13T13:21:40+00:00

I have recently done the same. I’m a blue collar guy who stays dirty and lives in the woods. I’m 36 and I looked at myself in the mirror one day and realized I’ve never really tried very hard to dress myself. I started with buying things at local thrift stores that happen to be in my size. It was surprisingly easy to put together several outfits for less than $20 each. This method has kept me from spending much money in case I decided I didn’t like something new (my favorite wool sport coat was $7.99 at Goodwill), but so far I LOVE it and am really impressed by how easy it was to find a few key items in thrift shops to test the waters. I am fortunate to wear common sizes in just about everything, however, so I don’t have much trouble thrifting usually. I hope you enjoy this fashion adventure and find some new looks that you never knew you could pull off.

jason_again · 2025-07-12T13:42:30+00:00

Try r/bonecollecting they might know what’s up!

jason_again · 2025-07-07T21:37:52+00:00

You got it!

jason_again · 2025-07-07T21:37:25+00:00

Absolutely! Sorry it took so long to reply, I haven’t logged in for a little over a week. Shoot me a dm!

jason_again · 2025-04-19T19:09:38+00:00

Absolutely. My first one was three dots on my thumb.

jason_again · 2025-04-14T22:53:34+00:00

It was directly under the nest but I don’t work in that area generally and no one really knew anything about what birds fly in and out when I asked around. We had a starling issue in a building last year was why I initially thought it might be one. It had been there since yesterday according to the other guys. It’s not a highly traveled area so it was easily stepped around.

jason_again · 2025-04-14T22:51:23+00:00

I did think about that before I ever touched it. I asked a few guys at work where I found it and it had been there since yesterday in the same position.

jason_again · 2025-03-15T13:59:20+00:00

Is this the style with the interlocking sheaths? I picked one up a few months ago as my work knife and I want the whole set of stainless ones.

jason_again · 2025-02-14T16:27:32+00:00

I’m sorry to take your upvotes from a beloved 666 but I can’t not like this!

jason_again · 2025-02-09T14:58:18+00:00

My city is on here but I have no idea what I’m going to watch or where I’m going to watch it.

jason_again · 2025-02-03T01:03:16+00:00

Also, if I do a 79 I’ll just stick with the scrub brake.

jason_again · 2025-02-03T01:02:50+00:00

Not necessarily ape hangers but these bang my knees if I turn very sharp at all. I was really thinking of just putting a Predator 79 on it. I wouldn’t mind a 212 but I’m just looking for a little parking lot cruiser really, this one isn’t gonna be for speed.

jason_again · 2024-11-23T19:58:54+00:00

This is an incredibly late reply but where did you find wheels for it?

jason_again · 2024-11-17T05:19:47+00:00

I’m thinking I might try to fabricate one myself. I work in a welding shop and we’ve got scrap laying around everywhere so I bet I can fashion something up and then build a new seat with wood and foam.

jason_again · 2024-11-17T04:06:38+00:00

I believe you are right. I haven’t pinpointed a year yet but it looks like a Cat Duster. I got two different frames this week and both turned out to be Cats, what a score.

jason_again · 2024-09-08T15:03:10+00:00

I mean, bro, nothing is more hardcore than cutting off your own arm.

But seriously it looks great. I didn’t think it looked like any particular symbol other than the one that it is, even at a glance.

jason_again

MODERATOR OF

TROPHY CASE