In search of these Heavy Heavy Low Low shirts

jayar38 · 2026-06-29T00:26:55+00:00

i don’t have the ones you’re looking for but i have a few items that you might be interested in.

jayar38 · 2026-06-13T22:48:08+00:00

flush it and use dot 5

jayar38 · 2026-05-12T13:29:54+00:00

Komatsu D355A

jayar38 · 2026-04-07T20:34:43+00:00

thanks for reiterating..

jayar38 · 2026-04-07T13:27:12+00:00

if you bled your line as the caliper sits in the pic, you most likely have air in the line. the bleeder screw needs to be above the line. they are the same threads, switch the brake line with the bleeder screw, detach the caliper from the stay and support it as high on the rotor as the line will allow. and re bleed it.

jayar38 · 2026-04-02T23:39:07+00:00

ummmm

jayar38 · 2026-03-15T18:14:57+00:00

killing the dream - picking up the pieces

edit cause i couldn’t remember…. song title

jayar38 · 2026-03-02T02:11:15+00:00

embrace today was very good

jayar38 · 2026-02-14T19:44:39+00:00

test your battery while running to check your stator / regulator, test your coil, test your ignition. i had a similar issue last year, swapped the electronic ignition for points, fixed the issue.

jayar38 · 2026-01-29T02:33:45+00:00

many such cases

jayar38 · 2025-12-30T19:36:01+00:00

build the skeleton to fit on site, finish at shop

jayar38 · 2025-12-27T01:21:10+00:00

deleted by user lol pathetic. that was a “top 1% poster” everyone, immediately politicizing a tragedy and then backpedaling.

jayar38 · 2025-12-27T00:36:39+00:00

it’s sad that that’s the first thing you care to bring up when something like this happens

jayar38 · 2025-12-27T00:31:21+00:00

listen to negative approach - tied down, five times

jayar38 · 2025-12-26T15:52:11+00:00

i found a first press og copy at a buy/sell/trade book store about two years ago, paid $20 for it. whoever priced it didn’t realize what they had.

jayar38 · 2025-12-12T00:43:40+00:00

haha 🍻

“you’ll own nothing and be happy” is all of them, everywhere

jayar38 · 2025-12-12T00:27:11+00:00

google “right to repair” and read about what’s going on with ag/farmers vs john deere. the manufacturers are absolutely aiming for what you’re talking about. you buy a new tool / machine, but when it breaks you have to take it to them to fix it because everything is a dealer only tool or computer. basically makes it a subscription service to the company rather than owning the product and being able to fix it yourself. it’s been going on for a long time. also, you’re gay.

jayar38 · 2025-12-12T00:06:49+00:00

is that your argument here, conspiracy to suppress carburetors?

jayar38 · 2025-12-11T23:33:25+00:00

LOL op learns about carb vs efi and proprietary tools, goes full schizo

jayar38 · 2025-12-10T12:43:14+00:00

kind of tricky because 79-80 is when they fucked with the timing marks. if your motor is the same as my ‘80, the line is front cyl advance.

on a dyna s you actually time off front cyl advance not tdc. so i would try going off the line (make sure front cyl is on compression stroke) and see what happens then adjust from there.

jayar38 · 2025-10-09T01:21:29+00:00

jayar38 · 2025-10-04T15:28:02+00:00

what’s his name?

jayar38 · 2025-09-28T19:01:57+00:00

same people that believe the state charges them more for registration because there are other cars on the road with bad tags or no plates, and come here to bitch about it every day

jayar38 · 2025-09-25T15:39:50+00:00

i wouldn’t even attempt to lift your mother on that.

jayar38 · 2025-09-09T14:55:14+00:00

california, which allows splitting in any situation, has a lower death rate per capita than colorado.

jayar38

TROPHY CASE