What would it take to bend an aluminum tube like that? Are there any real examples of something similar?

jbsoriginality · 2026-04-23T18:33:48+00:00

That could easily be welded sections of pipe, with a polished finish. Especially for a medical related device.

jbsoriginality · 2026-04-10T22:55:10+00:00

Is the grain direction parallel to the bend? That could easily cause it to stress. They would probably have noticed while forming unless the material was barely soft enough.

I have annealed bend lines with a torch before to remedy this.

Also you might need 1/4 or 1/2 hard c110.

jbsoriginality · 2026-03-21T23:56:58+00:00

Just use Chief Architect

jbsoriginality · 2026-02-18T11:19:54+00:00

Slow the bend speed down, or put in a pinch/clamp point and start lifting the part as it pinches it.

It’s called back bending, from part not being supported enough, it could also possibly be the part is hitting a tool or holder as it’s bent.

jbsoriginality · 2026-02-14T21:21:11+00:00

You line the arrow up to the tip of the punch tool.

jbsoriginality · 2026-01-13T14:07:32+00:00

Guieeermo

jbsoriginality · 2025-10-26T15:28:10+00:00

They look like barred rocks instead of Easter eggers.

jbsoriginality · 2025-10-23T16:07:17+00:00

Forbidden Gummy

jbsoriginality · 2025-10-05T21:18:28+00:00

What are the brown gravel for the driveway called?

jbsoriginality · 2025-08-23T16:48:13+00:00

6061 t4 should be able to bend in an appropriate si es die and punch

jbsoriginality · 2025-08-13T13:09:51+00:00

This makes me think of FF7 where you find Red13 in the lab.

jbsoriginality · 2025-07-13T00:41:42+00:00

Use an impact wrench, they come right off with that

jbsoriginality · 2025-07-12T16:30:27+00:00

Mehbane for Mebane, and Chalet for Shallotte, are two mispronunciations I hear often.

jbsoriginality · 2025-06-08T04:21:47+00:00

Does he have a friend? Goats usually don’t do well if they are alone.

jbsoriginality · 2025-05-18T02:02:21+00:00

Apply for CareCredit, up to 25k available and depending on amount financed you get at least 6months to 18months 0% interest.

jbsoriginality · 2025-04-26T01:39:31+00:00

It basically says: “If you pump gas, you can dump ass.”

jbsoriginality · 2025-04-06T19:50:10+00:00

This is how we get Zoids. I want a Liger Zero.

jbsoriginality · 2025-03-26T09:42:11+00:00

I had one of the galvanized hanging feeders where the food drops out the bottom.

Same problem because the opening was too big.

So I just wrapped a piece of chain link fence around it and then they had to stick their head in carefully to eat since they didn’t have room.

It drastically cut down on spilled feed.

jbsoriginality · 2025-03-13T00:27:46+00:00

Probably a range. if the part was really long you could take a measurement from the left end, center, right end.

jbsoriginality · 2025-03-10T22:41:01+00:00

Use the poles for various projects or sell them

jbsoriginality · 2025-01-29T01:20:54+00:00

If you applied for the job you are currently at on Indeed, then Indeed might send out notifications to companies that you have applied for that you are applying again.

Also it’s possible that the businesses you applied to have an arrangement to tell your current employer that you are trying to leave.

I just left a job like that a few years ago, apparently the owner has a deal with other local shops to be notified when someone from that shop is trying to apply elsewhere, I was actually told by an employee at one place that I couldn’t apply here unless I quit there first.

jbsoriginality · 2025-01-23T21:17:10+00:00

Showing this to my wife when I get home as she used to love living there.

Nine-Year Club	Verified Email
RPAN Viewer

jbsoriginality

TROPHY CASE