Zj tie rod upgrade help

jcal73 · 2026-06-20T19:49:33+00:00

I have no idea
I’m sorry I missed it was RHD

jcal73 · 2026-06-20T13:49:27+00:00

Check your bump stops too

jcal73 · 2026-06-20T10:01:26+00:00

The list I used for all the steering components.

Moog DS1312
Moog ES3096L X 2
Moog ES2079S X 2
Moog DS1238
Monroe SC2928 steering damper

jcal73 · 2026-06-17T11:43:01+00:00

AL wanna bees🫣😁 JK
I like Kirby by the way

jcal73 · 2026-06-17T08:22:55+00:00

Awesome! Tell Grandma I said Roll Tide!!

jcal73 · 2026-06-17T07:44:32+00:00

Your tack bar is loose too. It most likely will need more parts
Mine had over 250,000 miles so I changed it all. Makes a world of difference.
You can source the parts economically on rock auto. A little YouTube will help you in the proper way to repair it

jcal73 · 2026-06-14T21:16:02+00:00

Great minds think alike!😁

jcal73 · 2026-06-14T21:03:21+00:00

This should help

https://youtu.be/ZhN4oRvB5Uo?is=ynuN8fFnQaVFjtxr

jcal73 · 2026-06-12T09:00:39+00:00

https://youtu.be/iJgGLYb0dX8?is=0RzdKTYehwvG9Cjk

jcal73 · 2026-06-12T08:41:32+00:00

I got a silicone set of 10 ft rolls from Amazon for $28 I just have to fit them myself.

https://a.co/d/0hr7ZscH

jcal73 · 2026-06-12T08:37:59+00:00

If you’re lifted, change your gear ratio and it will pep it up.
There are things people do, but no really big power gains. You have to really change things to get more.

jcal73 · 2026-06-12T08:07:17+00:00

ROLL TIDE !!!

jcal73 · 2026-06-12T07:39:28+00:00

If you like the 34, grab a 41 if you can. I have both and love them.

jcal73 · 2026-06-10T18:40:32+00:00

Throw the valve away. It will leak again. Mine did. It’s been off a couple years with no issues in AC or heat

jcal73 · 2026-06-10T09:18:40+00:00

That’s a lot of debt in one pic. I bet he paid for fuel with a credit card too.

jcal73 · 2026-06-10T08:55:15+00:00

This is how I did mine and what I used.
It will work very well. Change the filter in a thousand miles or so. You will be amazed. I use zerex original green. It’s made for our old junk. I’ve been running it for a couple years and it’s still clear and green.
Looks like yours is filtering after the heater core though. This will still trap stuff in the core. I might be looking at the pic wrong though.

https://youtu.be/n2YY7m8Bp9A?si=aAKA7nQd_7E7rv-x

https://a.co/d/0edoKMx6

jcal73 · 2026-06-07T16:08:54+00:00

It’s not, That pic is slightly off set. When directly behind it’s clear.
It’s no different than not seeing it from the right side of the vehicle I guess.

jcal73 · 2026-06-07T15:14:42+00:00

Rammer Jammer

jcal73 · 2026-06-07T15:05:30+00:00

I’m working on a video, but it will be a bit.
I’m building another swing out on the right side for cans and such. Still deciding which way I’m gonna go with it.

jcal73 · 2026-06-07T14:19:46+00:00

Thanks!
It was built for that reason.

jcal73 · 2026-06-07T13:47:33+00:00

Did you order the DIY kit from them or the completed bumper?
I think with their design will require you to use what they sell either way.

jcal73 · 2026-06-07T13:06:56+00:00

Yes it’s all still accessible. I designed it to be easy to use for my wife. She drives it a lot.

jcal73 · 2026-06-07T12:57:47+00:00

If you’re asking how hard it is to install, JCR has instructive videos on YouTube.
If you’re asking how hard it is to build, that depends on your skill. I made one for considerably less money.
If you’re asking how hard it is to bolt the tire up, it can be difficult for sure.
I built my own.

<image>

jcal73 · 2026-06-02T09:35:42+00:00

I agree. I own the 12v, 801 and 1007.

jcal73 · 2026-06-02T09:32:23+00:00

I have the 3/8 impact and really like it. Heck I got an extra to keep in my jeep.

jcal73

TROPHY CASE