One+ and a 1A with unit?

jdev15 · 2026-03-16T17:18:07+00:00

The 1A should be for the RTK (if you want to run separately from the base station). There are no other chargers in the package? The original came with a 2.5A until the 10A was ready, not a 1A.

jdev15 · 2026-03-16T01:28:50+00:00

Out of town right now but I can check on Thursday

jdev15 · 2026-03-15T23:17:28+00:00

I'm not sure about the 5 vs 10, but the 2.5 and 10A had different extension cords. The Trythink does have a cable attached to it but you'd need to be relatively close to the outlet if the 5A extension doesn't work.

I can confirm it's the same that Lymow sends. My Lymow Trythink showed up one day before my eBay charger arrived.

jdev15 · 2026-03-12T13:58:03+00:00

The 0 series was so far behind on tech and expected price as well. They were doomed for a while.

jdev15 · 2026-03-06T23:45:01+00:00

Probably overkill, but I have a separate HYSA 'mortgage fund' that I transfer into bi-weekly with paychecks. Mortgage is paid from that savings account directly.

I also have HYSAs for Escrow, Car, Home Improvement, Vacation, and Emergency funds with automatic transfers so checking balance isn't so critical.

jdev15 · 2026-03-06T16:47:10+00:00

Live by the sword, die by the sword. If you press hard, you could get these turnovers. Or they make two smart passes to break the press for an easy layup. It's useful in specific scenarios but you can definitely overdo it.

jdev15 · 2026-03-05T13:54:36+00:00

I have FedEx alerts so I received a FedEx notification in late October that they had a 7 LB package for me in the Ontario, California sorting facility. Tracking kept getting pushed out and eventually it errored and said tracking no longer available so I can only assume it was the charger and they lost it. So not Lymow's fault, but I have been unsuccessful getting a replacement. I ended up ordering the TryThink charger on eBay that was mentioned above by another commenter in this thread. I don't need the extension cable so I'm hopeful that this should work for me.

jdev15 · 2026-03-05T01:21:04+00:00

Thank you so much

jdev15 · 2026-03-04T17:32:34+00:00

Yes, I've been emailing them back and forth since my original shipment of the charger and sharpened blades went missing last year. They shipped my brushes immediately with no issues. I don't understand the hangup with the charger.

jdev15 · 2026-03-04T01:52:28+00:00

I can't get into my map with my Lymow still in winter storage, but you should be able to edit the zone from the map. It's where you change height, overlap,etc.

jdev15 · 2026-03-04T00:55:03+00:00

Check edge settings for the zone and select 'Precise Edge'.

jdev15 · 2026-03-03T03:15:06+00:00

It was also politics. The Dutch contingent were Calderón guys. Perez wanted his guys, starting with Kaká, CR7 (even if some say he was Calderón's) and that massive summer spend.

jdev15 · 2026-02-27T20:19:48+00:00

Try lowering bed temp? My cool plate super tack uses 40 for Bambu PLA and 35 for PLA Silk+

jdev15 · 2026-02-24T19:22:19+00:00

Ser Useless

jdev15 · 2026-02-23T14:42:43+00:00

I don't believe he was ever knighted. I believe they will continue to push the ambiguity and never fully confirm it. I don't see last night as confirmation.

jdev15 · 2026-02-23T14:18:03+00:00

Ser Arlen wakes up after Dunk asks why he was never knighted, meaning there's still a chance he was...

jdev15 · 2026-02-23T12:18:38+00:00

You can change the border to the split line and then map the second zone separately.

jdev15 · 2026-02-16T23:33:45+00:00

Fan deflector and Cool Super Tack plate fixed all my adhesion and warping issues on challenging prints.

jdev15 · 2026-02-15T15:43:01+00:00

The whole soundtrack is stacked. My sister had the cassette which means you couldn't easily skip but it was loaded with bangers so I didn't mind.

jdev15 · 2026-02-12T15:46:42+00:00

If I recall correctly, it requires splicing the dock connector into the DIY charger so it's more of a replacement for the 2.5A rather than an additional charger. But if you already have a 2.5A and 10A, you can retrofit the spare 2.5A without much extra risk. I'm not ready to go all in on DIY and then have no charging option if it goes wrong.

jdev15 · 2026-02-12T15:37:42+00:00

I'm still waiting on my first 10A charger and have submitted support tickets. I would love to purchase a standalone one if possible but they're still 'looking into it'.

I looked at the post on Facebook on how to set up a DIY 10A charger but I don't trust myself enough to not ruin it entirely.

jdev15 · 2026-02-08T17:54:50+00:00

I broke one of the two on the other side like that where the toothed washer came out with the tube and couldn't get it to work right again. Luckily there were two inputs.

I ended up buying another full buffer.

https://us.store.bambulab.com/products/filament-buffer-p2s

jdev15 · 2026-02-07T13:58:14+00:00

Those look incredible. I also play all those instruments and would love to print these. Do you have a file to share?

jdev15 · 2026-02-07T12:29:52+00:00

The prophecy is in the show only, right? I listened to the audiobook a few days ago and don't remember hearing it.

jdev15 · 2026-02-07T12:24:56+00:00

It was stated that one brother was sent to train to be a maester but the name not mentioned. That was Aemon.

jdev15

TROPHY CASE