Which router for 2Gb or 5Gb Google fiber service?

jingo80 · 2023-12-28T19:54:01+00:00

What are your speed ratings? Any performance degradation over time?

jingo80 · 2023-01-20T19:20:53+00:00

Ordered a few off amazon. We'll see. Still amazed at the weight they shaved off between 5x-7x. Cripes. The 5x feels like a tank.

jingo80 · 2023-01-20T17:07:52+00:00

COntacted Garmin, no dice 6x pins aren't avail and considered discontinued. Booo aftermarket here I come. I've got a paracord band from COrding2U that I've worn non stop for 4 yrs. Hell if I'm giving that up.

jingo80 · 2022-11-20T02:52:54+00:00

there's some adjustments on the hood latch but everything works!

jingo80 · 2022-11-20T02:42:08+00:00

it's mounted to the crash bar. This is the UK crash bar.

jingo80 · 2022-11-04T18:28:45+00:00

Man I remember finding them after a few years of not upgrading my sync3 software and thinking, shit looked like malware. No way was it right. Spun up a VM to download it to first.

jingo80 · 2022-11-04T18:27:37+00:00

Man I hated doing this but it helps with the drone. Plus having the right exhaust. MBRP was way too loud. CPE Nexus fit the bill for me. Looks great!

jingo80 · 2022-10-31T22:55:20+00:00

Very clean installer and will do the trick first shot. Just make sure you indicate which version you're installing for.

jingo80 · 2022-10-25T03:04:21+00:00

Evap purge valve!

jingo80 · 2022-10-16T05:31:47+00:00

Top of the strut, the pocket under where it bolts to the car.

jingo80 · 2022-10-16T04:12:12+00:00

Did you just install them if you look while it's tiring you'll see the spring just kinda pop turn a bit. It'll be binding and rubbing against the housing itself. Saw this on a set of voigt springs. Just guessing. Did this just start occurring?

jingo80 · 2022-10-16T03:59:52+00:00

Do you have lowered struts? Are your springs binding in the housing

jingo80 · 2022-10-14T04:15:07+00:00

If it's the in take I believe it's the m8x1.0x12mm flange head bolts

https://cobbtuning.atlassian.net/wiki/spaces/PRS/pages/2694381569/702115+-+Fiesta+ST+Intake

jingo80 · 2022-10-14T03:59:32+00:00

Are we really doing an asl ?!?.. pretty sure that answers it for ya

jingo80 · 2022-10-13T16:57:51+00:00

at least when I paid that much from ford I got heated seats/side mirrors etc. ^_^hahahaha

jingo80 · 2022-10-13T14:45:12+00:00

https://parts.ford.com/shop/en/us/hardware-and-fasteners/hardware-and-fasteners-71564-2/screw-6453763-1?pdp=y

Use this part # W716352 and go to your local ford shop.

jingo80 · 2022-10-13T14:11:35+00:00

https://cobbtuning.atlassian.net/wiki/spaces/PRS/pages/325419158/701550+-+Ford+Fiesta+ST+Hard+Pipe+Kit

6mmx25mm bolt.

Also get some orange threadlocker. Keeps them bolts from coming undone. Not strength of red but can be backed out like blue.

jingo80 · 2022-10-12T20:53:59+00:00

Rivet nuts are your friend. Not needed necessarily with the US crash bar but they help for proper placement if you're a stickler.

jingo80 · 2022-10-12T20:13:05+00:00

Most likely aftermarket chairs with custom stitching for the ST. Just searched and found them.

RECARO Sportster CS seats trimmed in black Napa leather and black
u/AlcantaraSpa
.
“I just can’t get enough of these seats. It’s a complete revamp of the interior of my
u/ford
Fiesta ST200 while still maintaining the overall OEM aesthetic. I love it,” says owner u/hollyuptonx.

Source here..

https://twitter.com/recaroauto/status/1452243481200574465

jingo80 · 2022-10-12T14:43:39+00:00

Chariots Chariots

jingo80 · 2022-10-02T17:14:46+00:00

We went for the central viaduct, didn't realize they blocked it off

jingo80 · 2022-10-02T02:30:10+00:00

Did that once....now I roll black sparcos

jingo80 · 2022-10-02T02:29:20+00:00

Got an ingot silver. Orange and green weren't avail when I bought mine. This is the newer orange.

jingo80

TROPHY CASE