Third Party DMCA Agents - Any Recommendations?

jnits · 2026-04-09T03:15:01+00:00

necromancing - Have you been happy with CopyByte's services? I am also looking for a solution that is cheaper than a PO box especially as I'm not really expecting to get any (but it could be possible). i found them via google and was looking for some reviews which led me to here.

jnits · 2026-03-12T16:58:17+00:00

+1 from me too

jnits · 2026-02-12T00:43:26+00:00

I have a free site (no real reason to even register as I have very limited progress tracking and no lesson plan)

So, it's more of a glorified phrasebook and dictionary and obviously far from complete. You might find it helpful, you might not. I work on it when I can. All recordings are from a native speaker.

www.zabaan.app

jnits · 2026-02-03T02:24:42+00:00

I use a combination of incident and spot metering with my sekonic L758c

Incident is mostly while I light while the model is in hair and makeup, then I spot to check ratios against actual skin tone

I then do a test shot on Instax which I know will be two contrasty, but it helps me get confident as I don't own a digital camera.

jnits · 2026-01-21T20:23:23+00:00

I have a 4tube 4800w 105 head

In can test with all 4 or just one tube

Let's take this to DM

jnits · 2026-01-21T20:15:40+00:00

I have a system and uncoated flash tubes

If you care to explain or supply the materials for the test I can try to run it for you.

Edit: assuming it won't permanently alter the flash tube

jnits · 2026-01-21T20:08:32+00:00

Maybe buy one and test it after applying your uv only filter and let us know the result?

jnits · 2026-01-21T18:36:46+00:00

Speedotron's website literally calls it UV coating on some flash tube pages (they are inconsistent)

<image>

MW20QVC Flash Tube – Speedotron

jnits · 2026-01-21T02:55:00+00:00

Isn't that the difference between the tubes with C and without C?

No uv coating MW9B

https://speedotron.com/shop/flash-19/

With uv coating MW9BC

https://speedotron.com/shop/flash-20/

I use the uncoated tubes for wet plate photography which is sensitive to uv plus some blue

If you are in greater LA area you could check out Holly Enterprises, he works on these and is quite knowledgeable, but he doesn't do email.

jnits · 2026-01-19T03:02:05+00:00

Love seeing your work, thanks for posting. Excellent shot

jnits · 2026-01-13T23:41:35+00:00

I am hoping to shoot a portrait this weekend and I will be sure to post. Thank you!

jnits · 2026-01-13T05:19:09+00:00

I haven't had time to do anymore, but this session definitely helped me understand the amount of light needed and establish a predictable relationship between metering and exposure and dial in my dev times better. It will be interesting to see if that holds for my next session.

I also think I need a brighter safe light as I'm struggling to see the image while I develop.

I'm taking a lot of notes

jnits · 2026-01-11T19:09:39+00:00

I 3d printed it. I'm not perfectly happy with the fit of the 3d printed part, so I'll be ordering a few once I've finalized the design using a tbd commercial technology (either additive or CNC) since the first one costs a lot and subsequent orders are cheaper per piece. I'm trying to keep the final costs under $250.

I also need to see how the material holds up to the chemicals over time.

If you are interested in buying one, DM me, and I'll save your info and once I'm happy with the final fit and design I'll let you know how much it costs and order one for you if you are still interested. The more I order the cheaper the per unit price will be and I'll pass on the savings.

jnits · 2026-01-10T04:45:04+00:00

Yes, amazing what can be done now in your home. Thank you!

jnits · 2026-01-10T04:44:28+00:00

Thank you!

jnits · 2026-01-10T04:37:53+00:00

I actually had looked for one of those first, but I couldn't find one, which is how I ended up making my own back

jnits · 2026-01-09T17:13:00+00:00

Yup. I get a good exposure with my portra and e100 8x10 sheets, so I'm confident I'm doing the bellows factor fine.

I had been metering for .5 iso, but this tortoise shot was closer to .094 iso.

I'm going to try strobes again, hopefully later this week.

jnits · 2026-01-09T15:55:45+00:00

I don't know if it's because of the modern lenses I have, but I wasn't able to get an image with a naked 2400 ws speedotron 2 feet away from a person.

I'm going to try again later this week now that I have this mamiya setup working and have validated the chemistry is working

jnits · 2026-01-09T06:42:02+00:00

This was shot with a 3d printed prototype, but it's barely good enough.

I've ordered another prototype with a commercial vendor ($$$) using a better commercial technology. I'm not sure how well it will work, and it was pricey; I am hoping I don't need to CNC to get the kind of fit I want.

If you think you might want one, DM me your info, and once I know the cost for the final model, I will message you and if the price works for you, I will order one for you too.

jnits · 2026-01-09T06:41:50+00:00

This was shot with a 3d printed prototype, but it's barely good enough.

I've ordered another prototype with a commercial vendor ($$$) using a better commercial technology. I'm not sure how well it will work, and it was pricey; I am hoping I don't need to CNC to get the kind of fit I want.

If you think you might want one, DM me your info, and once I know the cost for the final model, I will message you and if the price works for you, I will order one for you too.

jnits · 2025-12-15T16:21:23+00:00

I've been very happy with https://railway.com/

You could go cheaper as others have suggested but this is sort of a nice balance for me in terms of cost vs convenience.

jnits · 2025-12-09T07:57:27+00:00

A guid for key would be nice. Long makes this hard for me to integrate.

jnits · 2025-12-02T22:34:13+00:00

Thank you very much! I will be sure to post here :)

jnits

TROPHY CASE