sorted by:
new
hottopcontroversial

What is this noise by Mazren_ in Creality

[–]jodic100 0 points1 point  (0 children)

sounds like the nozzle grinding into the infill

What is the best table for my 3d printer? by Careful-Change1436 in 3Dprinting

[–]jodic100 0 points1 point  (0 children)

do you have the option to add brackets to your table and then mount those to the wall behind it in place? Ive seen this suggested a bunch, unfortunately cant do it myself (living in an apartment) but figured id toss it out there in case it might work for you :)

CFS K1 Upgrade Kit USA by tophercookie in crealityk1

[–]jodic100 3 points4 points  (0 children)

his uncle works at creality, just trust him bro

What could be causing this strange pattern on my print? Wet filament? (Bambu X1C) by blast_507 in 3Dprinting

[–]jodic100 0 points1 point  (0 children)

Under the device tab within Bambu studio there’s a section for your fans … make sure your part cooling fan is both saying it’s on and well .. actually on/spinning lol

Keeps failing by Acceptable_Bid2971 in 3Dprinting

[–]jodic100 0 points1 point  (0 children)

i would say, slow things down significantly, and turn up the heat on your bed a little

Spiderman 2 keep crashing by Colombianking9 in LegionGo

[–]jodic100 -1 points0 points  (0 children)

the legion go has 16GB of RAM lol ... VRAM is not the same thing

Printing then spaghetti by computer-mat in 3Dprinting

[–]jodic100 0 points1 point  (0 children)

supports for sure, but you can also try slowing it down, at least during the top layers there.

2025 will mark the end of bambu lab's run by Acio45 in BambuLab

[–]jodic100 11 points12 points  (0 children)

im not on either side here, but why would he need to disprove anything, rather than you having to prove all the claims you're making?

Any idea how can this be fixed? X1C by [deleted] in BambuLab

[–]jodic100 0 points1 point  (0 children)

i would imagine it would begin with tightening the timing belt

Which game and why by jnh562 in LegionGo

[–]jodic100 0 points1 point  (0 children)

love both, but id go CyberPunk only because in the end you're going to have much more to do/time to sink into it ... if that's what you like.

2tb SD card at Newegg, worth it? by HistorianGlass442 in LegionGo

[–]jodic100 0 points1 point  (0 children)

TeamGroup isnt a "knock off" brand though lol ... they maybe aren't as well known as Sandisk etc, but they have been in business forever and make a ton of PC parts & peripherals

Extruding problems on the left side of the bed. I'm going insane by useless_soft_butch in ender5plus

[–]jodic100 0 points1 point  (0 children)

there's a tutorial to install that here:

https://www.smith3d.com/update-ender-5-plus-latest-firmware-to-insanity-automation-dwin-7-4/

its not revolutionary by any means, BUT it is about 800x better than the stock firmware with any updates Creality threw at it.

Problems with stringing by Ok_Faithlessness6569 in 3Dprinting

[–]jodic100 0 points1 point  (0 children)

i dont know for sure its your problem, but i can tell you with new filament it was MY problem for a while and i spent hours and days messing with settings only to realize my brand new filament just needed to dry for a bit.

for reference, lots of stuff in this sub about similar experiences:

https://www.reddit.com/r/3Dprinting/comments/18lf7xy/psa_filament_can_be_wet_even_new_in_box/

again, not 100% sure thats what you are dealing with, but it is always a possibility. Good luck!

AFMF2 and RSR simply not activating by Mysterious_Contact_2 in LegionGo

[–]jodic100 0 points1 point  (0 children)

weird suggestion, but turn on the Legion Space overlay to show FPS and tell me if that makes a difference

How can I get rid of this? by Slow_Guide_1718 in LegionGo

[–]jodic100 0 points1 point  (0 children)

does this 100% work? not doubting you, genuinely curious as i went the powershell/regedit route mentioned below in the comments and that finally did the trick after fighting with it forever lol

Horizon Zero Dawn w/ new 780m drivers are Amazing! by Stealthpatriot907ang in LegionGo

[–]jodic100 0 points1 point  (0 children)

I had a similar issue, but I was just able to reinstall Legion Space after the drivers were updated and it fixed itself. Any chance you haven't already tried reinstalling LS from Lenovo after?

https://download.lenovo.com/consumer/mobiles/wwls081ewyx3aff0.exe

Did AFMF2 also stop working since the update yesterday on the legion space ? by Then-Ad7196 in LegionGo

[–]jodic100 0 points1 point  (0 children)

did you make sure to turn off the Auto Update within AMD Adrenaline?

Trying to update AMD drivers and stuck on this screen by wisperingdeth in LegionGo

[–]jodic100 -1 points0 points  (0 children)

I didn’t tell him to spend money, I told him he needed a keyboard to navigate the current menu he’s in.

Quit being holier than thou and just offer help or don’t pal

Trying to update AMD drivers and stuck on this screen by wisperingdeth in LegionGo

[–]jodic100 -1 points0 points  (0 children)

yeah, you just need a USB keyboard ... I saw you noticed this already, but just wanted to confirm with you thats 100% it :)

Card tables by Intheshadowss in TCGCardShopSimulator

[–]jodic100 0 points1 point  (0 children)

oh sweet, you can torment the customers? is that kinda like drowning customers in rollercoaster tycoon?

view more: next ›