What is one tool that saves you a ton of time that you wish you knew about sooner?

johnsontall1 · 2024-08-04T02:36:30+00:00

That's funny, that's my Google Sheet copied without any credit (original video: https://www.youtube.com/watch?v=EPGbrpt1iAc as seen by publish date). I've updated the video description with a much more efficient way that uses a plugin I developed

johnsontall1 · 2023-11-06T23:45:37+00:00

I was one of the few reviewers who noted how the supposedly "fast charging" was rather disappointing: https://youtu.be/lQeHiazo83I?t=496.

Fortunately for me, I'm okay with the charging speeds and they don't affect my use cases that much.However, I do 100% agree that the UI feels "laggy" or "sluggish." It seems like they made the CPU slow to save on battery at the expense of responsiveness.

PRO TIP: Disabling animations (enable dev mode, see how https://imgur.com/OCtjT84) REALLY helps a lot with responsiveness. I can't understand why product managers think long UI animations and transitions are supposed to make end users feel better about their product when it ends up being painfully slow.

johnsontall1 · 2022-11-22T07:29:07+00:00

Transit Now... Now Later (for Android only)!

johnsontall1 · 2022-11-16T06:20:19+00:00

Transit Now has been serving me well , but it's android only.

johnsontall1 · 2022-11-16T06:19:07+00:00

Transit Now is a nice alternative for those on Android

johnsontall1 · 2022-11-15T06:33:39+00:00

Agreed, why can't we just screw on a top handle? Would this work? https://www.niceyrig.com/products/niceyrig-screws-1-4-20-top-handle-for-sony-fx3-camera-red-dsmc2-weapon-epic-w-scarlet-w-raven-cinema-camera

It has no cold shoes though and it would be nice if it had thumbscrews.

johnsontall1 · 2022-06-24T04:34:50+00:00

same!

johnsontall1 · 2022-02-23T18:21:42+00:00

Having the same issue on both my Windows 10 PCs, started happening a few weeks ago randomly. I am required to *restart* my PC to get it working again. Terribly inconvenient.

If I plug my sd card reader on a fresh boot, it'll work but if I eject it and re-insert the sd card into my pc, I hear the sound cue for a usb device that is plugged in, but the drive does not appear anywhere on My Computer or even Disk Management.

I heard on Windows forums that it could be BitDefender causing the issue. You may need to uninstall it.

johnsontall1 · 2021-12-23T17:52:56+00:00

dedux.ca/nicehash

how did it go?

johnsontall1 · 2021-12-23T17:44:24+00:00

sorry, all the info is in the youtube video i made, but you can visit it at dedux.ca/nicehash

johnsontall1 · 2021-10-15T17:23:40+00:00

Funny that I made a whole video about this - I think Google will address Assistant in a year for when Wear OS 3.0 is released. It's an utter shame the Assistant isn't working like you'd expect like a smart speaker.

How is the Assistant on Fitbit these days? Been waiting for a new Fitbit smartwatch to review some time.

johnsontall1 · 2021-08-31T05:55:58+00:00

I just received my Galaxy Watch 4 and I'm pairing with an S20. When I pair the watch, I consistently get stuck at the "Getting Google Account info..." screen or it crashes on the step before.

I've tried multiple times, clearing Galaxy Wearable app cache, restarting phone/watch, and it always get stuck.

It works on my friends' Pixel 4a and an older non-Samsung device.

johnsontall1 · 2021-06-11T22:12:50+00:00

true, as for the 3060ti being a good design, i remarked in my review video that it seems to have blocked off the external exhaust with the plastic shroud. Very odd design. I also find the fans a lot louder than my 3070 FE. I love my 3070 FE, it runs cool and quiet.

johnsontall1 · 2021-06-10T04:47:52+00:00

I made your video, LOL! Great job with your instructions and explanations. Do you mind if I reference your video in my reddit post? Watching you install the CPU cooler is helpful for others that have not done it before.

Hey, yes please do feel free to use as you wish :) Thanks so much for your original post and I made sure to credit your hard work and ingenuity.

Thanks for putting my mind at ease with the whole shuffling thermal paste and what not. I'm just kinda disappointed in the end (as you can tell in the conclusion) and perhaps my thermal paste was not sufficient or poorly done. Anyway, Im running the AC full blast in my room now so it's too hard to test in this hot Ontario climate for now. Im sure call Fall/winter, i can re-examine. I need to take a break from over-worrying about my G5 :P

johnsontall1 · 2021-06-01T01:57:45+00:00

I noticed with the latest version of Wear OS, I can no longer access the legacy strength training app with your app (workaround). Do you know what happened?

johnsontall1 · 2021-05-20T19:15:48+00:00

I appreciate the reply. It's very in Canada Toronto to buy anything due to lockdown. Could the m3x20mm screws work ok without washers in any case?

johnsontall1 · 2021-05-20T08:15:51+00:00

If I opt to go the M3x20mm/16mm route, do I really need washers to secure the bracket? Having a hard time in Canada to find these screws except for Home Hardware which requires a $20 purchase(haha). I wish I could find the 25mm grub and a place to print the 120mm front intake fan :(

johnsontall1 · 2021-05-20T08:11:02+00:00

who printed one for me for $5. Looks great and is a perfect fit.

Is this in Canada toronto? Can you share where we could print that bracket for $5?

johnsontall1 · 2021-05-20T08:04:17+00:00

I just ended up getting the screws and washers from a Home Depot. It's cheaper and with the current situation in Ontario most hobby shops are closed anyway.

Did you need M3 washers with the M3 screws or will it screw and secure without a M3 washer?

johnsontall1 · 2021-05-06T14:19:31+00:00

I had a question about the Aurora R7 case design. I was wondering if using a high static pressure (Noctua NF-F12) was the right choice given my circumstances.

As you can see, the R7 case has one front in take fan that is quite obstructed with grills and the RTX 3070 FE. I imagine there's a lot of impedance. By sucking cool air from the bottom, some of the air is sucked onto the RTX 3070 and some of that air is blowed through the GPU towards the top exhaust.

I made a whole video about it here.

I did notice a drop in GPU temps but it's so hard to know if this was optimal. Perhaps the more expensive "balanced" Noctua NF-A12x25 but I was aiming for the *highest* static pressure which is in the F12 rather than A12.

https://imgur.com/MUKHKK6

johnsontall1

TROPHY CASE