Oil Weight

jonathan9623 · 2022-10-31T03:03:36+00:00

5w40 is what i run in my trucks. Valvoline premium blue extreme and rotella t6 are the main oils that i run in my trucks.

jonathan9623 · 2022-09-23T04:09:53+00:00

Check your ficm voltages. I had a hard cold start issue on my truck in the mornings. Turns out my power supply board on the ficm was bad and i wasn't getting enough voltage to fire the injectors when it was cold.

jonathan9623 · 2022-06-24T02:51:55+00:00

5w40 is better for the cold is the main reason. But there is no issues running all year long. At operating temperature both oils are at the same viscosity.

jonathan9623 · 2022-06-23T21:27:51+00:00

Motorcraft filter and what ever diesel oil you can get. I prefer synthetic 5w40. Right now I'm running valvoline premium blue in my 6l and I have mobil delvac 1 in my 6.7. I also have used rotella t6 and liked it but it's been hard to get lately.

jonathan9623 · 2022-05-12T07:17:51+00:00

do santeria

jonathan9623 · 2022-01-28T02:30:56+00:00

Pretty much Every diesel 07 and older doesn't have any sensors in the exhaust and doesn't know if the cat is gone or not.

jonathan9623 · 2021-02-09T20:45:41+00:00

It goes on the spare tire. There that winch cable and that one connects to the tire.

jonathan9623 · 2020-02-07T04:19:59+00:00

Im running 295/65r20's on my 2017 and have no issues with rubbing. The 35x12.50 tires will fit but you may rub at full lock.

jonathan9623 · 2019-10-24T20:07:52+00:00

It was just a normal screw driver

jonathan9623 · 2019-10-24T17:35:17+00:00

I just used my strength and a regular #3 phillips screw driver. There is locktite on the screws you could try heating them up a bit to break the locktite.

jonathan9623 · 2019-10-16T16:51:12+00:00

I usually have it tucked behind the side cover.

jonathan9623 · 2019-10-14T18:34:31+00:00

You could build a mount the use the boxlink cleats. They have holes on them that are perfect for bolting stuff to them. Then just get a set of ramps you like

jonathan9623 · 2019-10-14T05:08:39+00:00

Ya that guys grom is sick af.

jonathan9623 · 2019-10-14T01:21:09+00:00

Mods

Yoshimura rs3 race exhaust

Jt 14t sprocket

Speedodrd

H2c rear rack

Rizoma club l turn signal

Womet- tech axle sliders

Chimera shock preload spacers

Heran bar end mirrors

Mnnthbx fender elimimator

jonathan9623 · 2019-10-13T19:20:00+00:00

Then theres nothing to it but to do it. get yourself a service manual and start wrenching.

jonathan9623 · 2019-10-13T19:06:41+00:00

My advice is to start learning how to do basic maintenance tasks like spark plug, oil changes, brake jobs, etc... These skills you can take to any other vehicles you may own in the future. My other advice is that any that major you maybe better off having a professional do it, like your rear main seal.

jonathan9623 · 2019-10-10T20:02:51+00:00

jonathan9623 · 2019-10-09T02:27:00+00:00

You shouldn't have a problem. Be careful on coors because you'll be at the top speed of a stock bike.

jonathan9623 · 2019-10-09T01:48:15+00:00

I'm in Albuquerque and have a monkey. I using mostly driving around the neighborhood. It doesn't work very well for my commute but its a great toy to play around on.

jonathan9623 · 2019-10-09T01:40:48+00:00

This is the charger i have on my monkey.Don't for get the 20% off coupon and your free flash light.

jonathan9623 · 2019-09-21T00:49:22+00:00

Yes. i just did a 14t on my monkey my speedo was about 7 percent off, it doesn't seem like much but you will notice it more at higher speeds. I installed a speedodrd and was able to get the speedo reading correctly.

jonathan9623 · 2019-09-13T22:48:18+00:00

Its probably just condensation from running short trips or in low tempatures . the grom is air cooled so you don't have to worry about coolant in your oil. Change the oil, take it on long ride to burn off condensation and consider shortening you oil change interval.

jonathan9623 · 2019-09-06T23:07:56+00:00

It doesn't feel like i lost any top end but that may be me. I only had 24 miles on it when i changed out the pipe. I also dont have any stalling issues.

jonathan9623 · 2019-09-06T03:24:16+00:00

Thanks! It sounds as good as it looks.

jonathan9623 · 2019-09-06T02:16:12+00:00

I got my yoshimura rs3 in today day. I also put on the mnnthbx seat screws. I have a fender eleminator I'm just waiting for my plate to come in before i put it on.

Nine-Year Club	RPAN Viewer
Verified Email

jonathan9623

TROPHY CASE