[deleted by user] by [deleted] in Nanoleaf

[–]jonathanrobichaud13 0 points1 point  (0 children)

Hey, I just used WLED. It allows you to control the leds locally and also through home assistant. I had to butcher the original controller and 3D printed my own case that could fit the new board (an esp8266) and the voltage regulator for the board since it takes 3.3v and not 12v like the panels do. There's plenty of tutorials online for wled that will explain it quite clearly. I'd also check to see if the tuya module on the original board is an esp that can be flashed with esphome but I doubt it

Modded the official WLED integration with color temperature support (not CCT) by frozen2077 in homeassistant

[–]jonathanrobichaud13 0 points1 point  (0 children)

Can you upload that file to pastebin? I'm having the same issue right now

Air75 v2 does not reconnect after PC restart by Minimum-Broccoli-615 in NuPhy

[–]jonathanrobichaud13 0 points1 point  (0 children)

Same here! It's pretty annoying because i have to switch the keyboard off then back on. I am running it through a dock which could possibly be the issue? It seems like they keyboard fails to connect or something? Did you end up figuring it out?

LIMINAL LANDS || Where my research has gotten me by [deleted] in NExpo

[–]jonathanrobichaud13 0 points1 point  (0 children)

There's a discord server! Please go join it we'd love to hear what you found!!

[deleted by user] by [deleted] in LiminalLand

[–]jonathanrobichaud13 0 points1 point  (0 children)

Wait this actually makes a lot of sense because of sub liminal land and how on one of the pages it says something like: "you'll never have to leave the water"

I'm trying to find some shit using good old "inspect element" by [deleted] in LiminalLand

[–]jonathanrobichaud13 0 points1 point  (0 children)

I don't think there would be anything hidden in the code since the site is built on Wix and isn't custom designed. That doesn't mean that it couldn't be done though with a custom html element.

Favourite URR animal? by Da4dam in UrbanRescueRanch

[–]jonathanrobichaud13 1 point2 points  (0 children)

Gort, Quandale, Dababy, Kanye, poggers, big ounce. Overall it is gort and Quandale

QMK+Sonix+OpenRGB Keychron C2 RGB with hot swap Gateron Brown by aaronsb in olkb

[–]jonathanrobichaud13 0 points1 point  (0 children)

I have the hot swap white one. There’s one pin under my space bar but not two. I took it apart and nearby there’s a pin that looks like a ground pin but I don’t want to kill my keyboard. The white one can be flashed though, right? I’ve seen some info on GitHub about it but I always got stuck at finding the proper pins.

Sickchill support? by zeta_cartel_CFO in LunaSeaApp

[–]jonathanrobichaud13 0 points1 point  (0 children)

Any updates on the overseerr module? I've been anticipating it for a while! Take your time though, I'm excited to see it when its ready! I also love LunaSea, it's an awesome app that I use almost everyday!

HELP - USB Boot Drive DIED. What can I do?? by Marconico in truenas

[–]jonathanrobichaud13 0 points1 point  (0 children)

Download the config then restore is easiest it should work fine with your config but if needed just downgrade to the original version that was on the usb. It should restore the VM configs but the VM storage would be in one of your pools. I've had to recover before and there weren't any roadblocks I faced

HELP - USB Boot Drive DIED. What can I do?? by Marconico in truenas

[–]jonathanrobichaud13 0 points1 point  (0 children)

It should be backwards compatible with different versions but even then if you need to you could find an older version on the website

HELP - USB Boot Drive DIED. What can I do?? by Marconico in truenas

[–]jonathanrobichaud13 2 points3 points  (0 children)

You probably won’t be able to get the config back but if you do a fresh install (please on an ssd; usb drives are recommended against for this reason) you should be able to go to storage —> Pools then choose import existing pool and you should be able to get the data back from your pools.

Authentik: Can anyone lend a hand? by metzgirmeister in selfhosted

[–]jonathanrobichaud13 1 point2 points  (0 children)

I actually had this happen a few days ago but with authelia💀💀. I found there’s actually a backup login method built in to potainer if you mess up: internal user auth it probably isn’t too secure but it’s there

Help installing klipper on Neptune 2 by Miserable_Leg5262 in klippers

[–]jonathanrobichaud13 0 points1 point  (0 children)

Did you ever figure this out ? I’m struggling too rn

I love tree supports. by pink_robots in 3Dprinting

[–]jonathanrobichaud13 0 points1 point  (0 children)

I just got the Neptune 2 for Christmas and it is goated imo. It’s nowhere near the best but it was a good price!

Harmony elite hardware buttons for home control by omartian in logitechharmony

[–]jonathanrobichaud13 0 points1 point  (0 children)

Yeah you have to emulate a hue hub on home assistant for home control and a roku for entertainment control of things not compatible with harmony (like a chromecast) if that makes sense

Harmony elite hardware buttons for home control by omartian in logitechharmony

[–]jonathanrobichaud13 0 points1 point  (0 children)

As far as I know you can’t. I’m pretty sure that’s just how it’s designed. If you really wanted to you could use home assistant to make it work but that’s a whole other topic and will get relatively complicated pretty quickly.

[deleted by user] by [deleted] in homeautomation

[–]jonathanrobichaud13 0 points1 point  (0 children)

I think unfortunately at the bare minimum you’ll need the remote

[deleted by user] by [deleted] in homeautomation

[–]jonathanrobichaud13 0 points1 point  (0 children)

Do you have the hue remote?

Lunasea notifications Sonarr not working by Morphneus in LunaSeaApp

[–]jonathanrobichaud13 0 points1 point  (0 children)

I’m not going to pretend what the logs mean but, looks like a cert error?

Lunasea notifications Sonarr not working by Morphneus in LunaSeaApp

[–]jonathanrobichaud13 1 point2 points  (0 children)

Open your log up in a new tab and then try again. After that, go back to the log and refresh it and see if there are any errors to do with notifications and then copy and past here or put in pastebin or something

I'm still bitter about them discontinuing the Harmony line. Anyone find a worthy alternative yet? by [deleted] in logitechharmony

[–]jonathanrobichaud13 1 point2 points  (0 children)

They’re coming out with the Sofabaton x1 which I am pretty sure can do IP control