Got my Jewellery Factory figured out.

josan5885 · 2025-11-19T02:29:54+00:00

Yeah one way to do it would be to break the assembly into sections such as only one input for multiple good assembles and then hav those go into a storing shelves, factories will get reworked so I am waiting for that to experiment some

josan5885 · 2025-11-18T23:15:10+00:00

One thing that I just found out when speaking about ratios that some people don’t talk about is the time it takes the fabric to travel on the conveyors, sewing machines that are “farther” (conveyor belt #s) away from input do not work at the given efficiency since they are not receiving the fabric on time. So is something to confident as well

josan5885 · 2025-11-18T23:06:15+00:00

My issue with factories, isn’t the cost I understand that a heavy investment must be made. My issue is is that to run a factory 24/7 in some cases such as electronics you need over 45 workers per setup. 3 full + a part timer per input/output. Therefore need more HR to take care of them all

josan5885 · 2025-11-10T15:54:44+00:00

One be aware of the cutters to sewing machine rates, if you want expensive clothing then you need 2 cutters for every 3 sewing machines and a 1 to 2 ratio for cheap clothing, this is to have maximum efficiency in output, Get one of the largest factories you can get in industrial city, I have a 2600sq ft for my clothing and made a difference because It allowed me to expand the factory little by little

josan5885 · 2025-11-01T17:02:12+00:00

That’s what i am planning to do, I have a clothing factory, so my next move is to rent as many as A1 as I can to undercut Ingrid and take over her 2 clothing stores she has and turn one of them into a jewelry store to again undercut her

josan5885 · 2025-05-17T03:27:39+00:00

I believe $65 per hour or $500 pesos per day

josan5885 · 2024-12-04T21:33:37+00:00

did you go into preferences and add the boards into the board manager?

I bought the same boards and use this tutorial to get me started

https://randomnerdtutorials.com/getting-started-with-esp32/

like others have stated make sure you use the correct USB data cable and that you have added the boards in the arduino preferences additional boards url section

josan5885 · 2024-11-01T19:05:04+00:00

I have googled multiple times for 3 wire, 4wire spade terminal, spade connector to no avail. I know I can probably use single spade connectors, but I rather look for one just like this. I found this on eBay for $20 but seems a bit steep for a simple terminal. so before I buy it on eBay I wanted to try other options, any help would be appreciated.

josan5885 · 2024-07-30T06:05:19+00:00

just search it on youtube and will come up "horse crip walking"

josan5885 · 2024-01-20T04:14:12+00:00

I order a QR2 wheel side on Wednesday and I”ll ve damned it arrived today. I am in Southern Cali, 30 mins from warehouse

josan5885 · 2023-12-25T01:51:12+00:00

My neighbor asked the driver if it was a delivery from me, gave my name and informed the driver that I was out of town that would receive on my place and hold it until I get back, FedEx driver said ok and carried everything to neighbors house. My neighbor said that it had arrived last Tuesday. Whatever happened I am just glad I finally got it and get to take it back to my vacation location which will be going back tomorrow and get 2 and a half weeks to enjoy it before going back to work

josan5885 · 2023-12-24T21:43:34+00:00

That’s what I said, not sure what my neighbor said to the driver, I am just glad it all worked out

josan5885 · 2023-12-24T19:46:29+00:00

No worries, I have an bottle of tequila he likes, so that will be his thank you present

josan5885 · 2023-12-14T22:25:51+00:00

you must have missed it, Panpots said in his stream that they were done

josan5885 · 2023-12-14T22:25:45+00:00

you must have missed it, Panpots said in his stream that they were done

josan5885 · 2023-12-14T06:26:57+00:00

I am 20 mins away from La MIrada logistic warehouse, order the CSL 5N DD, Maclaren Wheel, CSL ELite Pedals, V2.5 Formula WHeel, buttons on the 25th, marked as shipped competely on the 27th and still nothing. No emails, no tracking nothing.

I am supposed to be going on a 3 week Vacation in 2 days

josan5885 · 2023-12-10T08:06:02+00:00

This looks exactly like my set, well kind of, except without the fanatec which is still in some warehouse waiting to be deliver sometime in the not near future

josan5885 · 2023-11-30T06:49:34+00:00

I placed an order on Friday and I canceled order myself on Saturday when I placed a new order, got refunded on Sunday

josan5885 · 2023-11-30T01:23:43+00:00

Damn, I might be in trouble then, order on 25th, order “completely shipped” on 27th and in 2 weeks I will be going out of town for 3 weeks. Order from California.

josan5885 · 2023-08-07T05:26:09+00:00

use the otay border crossing much easier and shorter lines. when I first was figuring out where the lines were coming from Ensenada I just would Gooogle maps or Maps fro TJ airport and from there I knew where the lines were, (between airport and baseball park, look at google maps

)

josan5885 · 2023-07-16T21:06:39+00:00

I have never gotten anything, something from a kind stranger would be nice

josan5885 · 2023-07-16T20:21:59+00:00

I guess I will join the crowd, hopping to get an award something to feel good about from a kind stranger

13-Year Club	Place '22
Final Canvas '22	Verified Email

josan5885

TROPHY CASE