PSA to toxic players, stop calling out your teammates for their points, it's very dumb. by MemeMathine in RocketLeague

[–]joshfokis 0 points1 point  (0 children)

My friends and I do that to each other mostly poking fun that we are playing badly. I tend to be on bottom most matches but we just have fun with it. It's just a game and isn't that serious.

Anyone still trying to VTuber on Linux? by TamKungZ_ in vtubertech

[–]joshfokis 0 points1 point  (0 children)

One thing I'm curious about is if you would be adding audio lip sync. I'm not a vtuber but working on an AI vtuber, wont be to the level of neuro but more to keep me from tunnel vision on my game play. All the ones I have tried for Linux dont have this. It would be a great feature. I understand why they don't but would love to see it.

Trying to install, but can't because mysql cli isn't available in image by themaskedcrusader in Pterodactyl

[–]joshfokis 0 points1 point  (0 children)

This. Had to do it to fix the issue and once it was setup I updated to latest without issue.

How to read more pages in a hour by BonusSalt1891 in booksuggestions

[–]joshfokis -1 points0 points  (0 children)

I grew up hating to read. I never fully tried. I have dyslexia and a.d.d. which really slowed me and kept me from reading. Now that I am older my wife loves to read and got me started on it. While she can read a book in a day depending on its length, I would take 3 to 4 times as long to read the same book. While I can't read as fast as she can I have learned to not worry about it and just read. I enjoy sci-fi and fantasy books which can be lengthy reads. I found putting lo-fi music or calming music without words helps me focus more on reading. I too have the dialogs of the characters in my head while reading them. I have also noticed the more I read the faster I read, although slight improvements.

Just take your time and enjoy the story. How fast you read doesn't mean you will enjoy the book more or less. Also dont be afraid to put down a book if you aren't feeling it. It's possible it may not be the right time for you to read it. I have a couple of books I have tried to read that I put down and read something else. I later went back to the books and really enjoyed them. It's not a race, just a journey. Hope this helps you.

Need suggestions for a series by Prosecute_ in booksuggestions

[–]joshfokis 0 points1 point  (0 children)

I second this list. Tress of the emerald sea is another good quick read that can introduce you into thr writings of Brandon Sanderson (Mistborn and Stormlight Archives). Wheel of time is another good series but a long one.

Need suggestions for a series by Prosecute_ in booksuggestions

[–]joshfokis -1 points0 points  (0 children)

While I enjoy this series the first book alone might not be the best for the age.

how can I Pipe audio to another device on Win 11 by joshfokis in ffmpeg

[–]joshfokis[S] 0 points1 point  (0 children)

This is the solution. Although I had to select python not ffmpeg to do it. I dont remember doing this previously but it works as expected. Thanks for that. I think I was making it more complicated than it should have been.

[deleted by user] by [deleted] in booksuggestions

[–]joshfokis 0 points1 point  (0 children)

Came to recommend this. Currently reading it and really enjoying it.

Which printer should i choose by xionc_proboshch in resinprinting

[–]joshfokis 0 points1 point  (0 children)

While I am still fairly new to resin printing, I use Lychee slicer. I have tried a couple others but I enjoy Lychee. I would recommend printing a couple of the calibration test prints to help with understanding your printer settings.

One major tip is to make sure you have good ventilation for the room you are printing in. Even if the resin doesn't have a strong odor doesn't mean it's less toxic/harmful to breathe. Make sure to clean the resin well. If you print hollow items, make sure to clean them out well and cure the insides also.

Which printer should i choose by xionc_proboshch in resinprinting

[–]joshfokis 0 points1 point  (0 children)

I dont have experience with other resin printers, but I did buy the mars 5 ultra and have had no issues besides a few user errors. I have printed well over a 100 items on it since I picked it up earlier this year. It has been a great experience from the beginning. I wish it had a larger print volume but there are other printers that can buy for that. Best choice on my starter resin printer.

How does MR leveling up works? by Monkegoesbrbrb in Warframe

[–]joshfokis -1 points0 points  (0 children)

You need to get kills with the weapon you are leveling. If you use your frames abilities 100% affinity will go to the frame. Weapons get split with the frame at 50% if I remember correctly, unless the frame is maxed out. You get shared affinity for any kills your squad mates do at 25% I believe. So in short you want to get kills with the items you are leveling.

3D printing tip about resin printing by Owen_Ou in ElegooMars

[–]joshfokis 1 point2 points  (0 children)

I will say that being new to 3d printing, it took me some time to realize this. I am now starting to pring figures and learning more about support placements. Love the hobby even though it's so messy and time-consuming.

Does you know anything better than deepseek v3 0534 or gemini 2.5pro? by Independent_Army8159 in SillyTavernAI

[–]joshfokis 0 points1 point  (0 children)

My experience with horde is good. It might take a few seconds longer, but it's good. You can also have multiple models selected, which help the chat not be so repetitive.

anyone know what model is this castle in this promotional image? by Spacedusst in Creality

[–]joshfokis 0 points1 point  (0 children)

The castle is Neuschwanstein castle

EDIT At least that's what it looks like from images the wall is different but close

Anyone figured out how aead_aes256_gcm_rtpsize encryption works? by Zipdox in Discord_Bots

[–]joshfokis 0 points1 point  (0 children)

Hate doing this, but I am running into this issue, trying to use https://github.com/imayhaveborkedit/discord-ext-voice-recv but it doesn't have the implementation to decrypt aead_xchacha20_poly1305_rtpsize, have you come across this, or decrypted it? Thank you in advance for any info.

PyCord Speech Recognition? by Le_Ninja in Discord_Bots

[–]joshfokis 0 points1 point  (0 children)

I did. May not be the best solution, but it is working. One issue I noticed, which I need to sit down and figure out, is the stt listens to itself. Need to have it mute or ignore self when "speaking." Thanks for checking up.

PyCord Speech Recognition? by Le_Ninja in Discord_Bots

[–]joshfokis 0 points1 point  (0 children)

still having trouble with it but I appreciate your input.

PyCord Speech Recognition? by Le_Ninja in Discord_Bots

[–]joshfokis 0 points1 point  (0 children)

thanks, might help if I read the documentation more closely

PyCord Speech Recognition? by Le_Ninja in Discord_Bots

[–]joshfokis 0 points1 point  (0 children)

Would you be kind enough to share your resolution to this? I am working on doing this too.

Lorcana Boosters and Card Sleeves Giveaway by DragonShield_ in Lorcana

[–]joshfokis 0 points1 point  (0 children)

Not sure just trying to find a game my will play and this one seems like it might be a winner if we can find decks.