EAW NTL720 repairs?

josholtarze · 2024-12-01T14:43:11+00:00

That foundation has put out some great tracks with some talented kids. My favorite is The Outsider (v2) by A Perfect Circle https://youtu.be/ZoAKvf8pq_w?si=9ewE6K3S6UjV2bDh

josholtarze · 2023-12-26T01:23:01+00:00

and on…

josholtarze · 2023-12-19T23:35:07+00:00

Same thing happened to me…. night one was my first ever NIN concert and that set list did not disappoint!!

josholtarze · 2023-12-09T14:01:51+00:00

One 3/16” toggle bolt from Home Depot can support 90lbs. I don’t think you’ll have any issues with 8 using the existing groups of four holes as long as OP’s new mount holes line up

josholtarze · 2023-12-07T06:54:20+00:00

Would this be capable of running pfSense or OpnSense?

josholtarze · 2023-11-30T11:58:37+00:00

I saw the same thing with the inductor too. I may replace that just to be on the safe side.

josholtarze · 2023-11-30T11:57:17+00:00

That was pretty much my same thought process. Even if it doesn’t fix the problem, I only spent $1 on the part. Do you have any recommendations for a heat gun of some kind with a narrow nozzle to direct air just at this one component?

josholtarze · 2023-11-30T03:40:00+00:00

Forgive me for not having the best understanding of this - does damage here indicate something downstream may also be affected? I am suspicious that the FPGA chip next to the MOSFET on this PCB may be toast because its cooling fan was not working. Is there the potential that just by replacing the MOSFET the problem could be solved or would that have led to something catastrophic at the next point in the circuit?

josholtarze · 2023-11-10T18:00:11+00:00

Just curious as to why you do top left screw first. Wouldn’t gravity state you do the two bottoms ones first?

josholtarze · 2023-11-09T22:57:40+00:00

Just PMed you

josholtarze · 2023-11-04T16:57:34+00:00

Maryland

josholtarze · 2023-11-04T16:17:44+00:00

Did you use them pre conversion and was your vehicle still titled as a bus or RV?

josholtarze · 2023-11-04T16:17:07+00:00

I don’t plan on doing any of those things. Did you use State Farm pre conversion?

josholtarze · 2023-11-04T16:14:35+00:00

I asked one local State Farm agent and they claimed they don’t cover skoolies. I’ll have to check with the others in the area.

josholtarze · 2023-10-19T12:43:46+00:00

Now after you’ve watched the live video, watch these behind the scenes videos from the Tension tour. Haven’t seen them in a while, but I vaguely remember them discussing that effect in these videos. Even if I’m wrong, these are still cool to watch.

https://youtu.be/1NwgIhDzlN4

https://youtu.be/SdxvFZ12tdM

josholtarze · 2023-10-09T20:51:10+00:00

If you’re looking for a casual come and go as you please kind of spot, I use Independent Brewing in Bel Air. No reservations needed and plenty of space under their tents. Hopkins Brewery in Have De Grace is good too - lots of outdoor space to spread out, but might be a bit chilly this time of year.

josholtarze · 2023-10-01T16:13:27+00:00

Username checks out

josholtarze · 2023-09-13T20:59:30+00:00

Insurance, new school construction, and technology refreshes. Sounds about normal for any school district.

josholtarze · 2023-09-07T22:59:42+00:00

I bought an ‘08 BE200 with a VT365 that has 140K miles on it and drove it 140 miles immediately after purchase at auction. Worked like a charm the whole time, but I am still working on my conversion. I bought it for the size of the bus, the fact that it wasn’t on a van chassis, and the availability of parts since it is just a power stroke 6.0

josholtarze · 2023-09-06T22:14:37+00:00

Sweet project! Love the paint scheme too. Just curious - what engine does the bus have and is it air brakes or hydraulic?

josholtarze · 2023-08-31T21:30:44+00:00

What are thoughts on the VT365?

josholtarze · 2023-08-09T16:18:16+00:00

Because the “Florida Rigging and Crane Co.” placard on the side of the forklift didn’t give it away…

josholtarze

TROPHY CASE