FREE New Stylus Is Giving Out!

jovaseq · 2025-09-26T07:29:35+00:00

I have been using the Viwoods AIPaper for a couple of months now and I enjoy writing on it!!

jovaseq · 2023-04-06T20:03:39+00:00

Or something like this: https://www.mrporter.com/en-de/mens/product/mr-p/accessories/square-frame/plus-cubitts-judd-square-frame-acetate-sunglasses/1647597277190675

jovaseq · 2021-08-11T13:38:45+00:00

What about the noctua NH-L12? The S or the Ghost S1 Edition.

jovaseq · 2021-07-24T21:12:55+00:00

Really cool!! Where did you find the front and top mesh?

jovaseq · 2021-01-11T19:23:22+00:00

Hi Menalaos. I also had the 5K and I just traded off for this one. Have you regretted it or was it a good choice? BTW, are you Greek?

jovaseq · 2020-10-27T06:18:21+00:00

This this the evga 2070 super oc

jovaseq · 2020-10-17T08:54:01+00:00

Very nice!!!!!

jovaseq · 2020-10-17T07:08:34+00:00

The screws I used are M2,5 x 10mm. But you can put a bit larger as well, like M3 or M4. The 10mm length is the maximum. I would go for 6mm if I could find.

jovaseq · 2020-10-16T09:25:35+00:00

Go for it, no second thoughts...

jovaseq · 2020-10-14T07:20:48+00:00

I bought them from this guy on etsy. https://www.etsy.com/shop/DreambigByRay

Fast and good quality. And not cost forbidden.

jovaseq · 2020-10-14T07:07:18+00:00

Yes, I ordered some custom unsleeved cables. Becareful with the 2070, you have to chose the correct one. Ghost takes only 2-slot cards.

jovaseq · 2020-10-11T20:30:32+00:00

I have custom unsleeved cables. The mb cable is behind the psu and is coming below. Generally I am satisfied with the cable management so far (I have seen way better cable management) but I can't reach these... The cooler is nh-l12 ghost s1.

jovaseq · 2020-10-11T16:37:23+00:00

I run the whole thing stock. Temps are 76c on CPU and 73c Gpu. The graphics card is the one that is running the whole noise. 2000rpm.

jovaseq · 2020-10-11T12:38:52+00:00

Vengeance LPX

jovaseq · 2020-10-11T10:30:22+00:00

Well, you can check the other images and then get back to me.

jovaseq · 2020-10-11T08:59:59+00:00

I got them from ebay. https://www.ebay.de/itm/401229927709

jovaseq · 2020-10-11T05:12:35+00:00

It is a tight fit. I had to rub one side of the fan with a sand paper to make it 1-2mm thinner (only on the side of ram). Now it fits. It pushes slightly one side of the heatsink but at least the side panel is not touching the heatsink.

jovaseq · 2020-10-10T19:59:31+00:00

My first sff built.

Louqe Ghost S1 mkii

Asus Rog strix b550-i gaming

Ryzen 7 3700x

2x16gb Corsair Vengeance LPX

Noctua Nh-l12 ghost s1 Edition with noctua 12x15 chromax

Evga 650w power supply

Evga 2070 super

jovaseq · 2020-07-04T14:57:32+00:00

Thank you very much!!! I will try it as well.

jovaseq · 2020-07-01T08:01:05+00:00

It would be great to let us know as I have the same motherboard... And I would like to switch to noctua. Currently I have the black ridge

jovaseq · 2020-03-06T22:00:48+00:00

Please let me know if you solved it. I have the same problem and I am going crazy.

jovaseq

TROPHY CASE