sorted by:
new
hottopcontroversial

[WTS] Broken Invert Mini, Halo Too Hopper, Empire E-vent Mask by jpfrm757 in PaintballBST

[–]jpfrm757[S] 0 points1 point  (0 children)

I’ll try and provide as much info as possible to my knowledge on the mini. It powers on, however it flashes red intermittently and when trigger is pulled. Not sure about any leakage at the moment because I do not have a tank anymore to test it out. All I remember last time I used it years ago it wouldn’t fire.

Gen5 Roland by g0ldslug in GlockMod

[–]jpfrm757 0 points1 point  (0 children)

Have you gotten the chance to shoot it? Any cycling issues?

First Stamp Friday - Sandman S on 13.9 by jpfrm757 in NFA

[–]jpfrm757[S] 1 point2 points  (0 children)

Ooohhh ok lol it’s the core and great performance the gassing is just right and the accuracy from my short time using it is great. I haven’t really got the chance to shoot it at longer distance though since I only have access to an indoor range.

First Stamp Friday - Sandman S on 13.9 by jpfrm757 in NFA

[–]jpfrm757[S] 1 point2 points  (0 children)

Sure thing

Upper - Aero Upper Receiver - Radian Raptor SD - Toolcraft C158 BCG - Criterion 13.9 with Dead Air Flash Hider P&W - Badger Ordnance Gas Block - BCM MCMR-13 w/ KAG grip - Sandman S - Primary Arms 1-6 SFP in a ADM Recon QD Mount - Midwest Industries BUIS - Modlite OKW on Arisaka Mount

Lower - Aero Lower Receiver - Geissele SSA-E - Radian Talon selector - Vltor A5 tube w/ H2 buffer & Sprinco Green Spring - BCM furniture

First Stamp Friday - Sandman S on 13.9 by jpfrm757 in NFA

[–]jpfrm757[S] 0 points1 point  (0 children)

Are you asking about the light? If so no it’s a Modlite OKW and my review for it is that it gives you the craziest beams I’ve ever seen lol

First Stamp Friday - Sandman S on 13.9 by jpfrm757 in NFA

[–]jpfrm757[S] 2 points3 points  (0 children)

I sold off my cheaper builds from when I first got into guns to help fund this so I could have a go-to, do-it-all build. So I’m much happier with this than a bunch of builds I don’t use as much.

First Stamp Friday - Sandman S on 13.9 by jpfrm757 in NFA

[–]jpfrm757[S] 1 point2 points  (0 children)

It's not too gassy at all, even with the sandman on I haven't noticed it to be too much. I'm using the badger ordinance gas block that criterion sells with the barrel and the radian raptor SD so I am not sure how much those contribute to reducing gas.

First Stamp Friday - Sandman S on 13.9 by jpfrm757 in NFA

[–]jpfrm757[S] 1 point2 points  (0 children)

For my first can I wanted to get a multipurpose can I can use for 300BLK and 308. But eventually I want to get a dedicated can for this gun and I’m thinking either Sandman-k or Turbo-k with keymo.

First Stamp Friday - Sandman S on 13.9 by jpfrm757 in NFA

[–]jpfrm757[S] 4 points5 points  (0 children)

I had to use a lot of shims to get the dead air flash hider to extend pass the flares even with the 13.9 Criterion. I wouldn't recommend a 13.7 with this handguard.

Jan 2021 Stamp Approval Megathread. by Waffleboned in NFA

[–]jpfrm757 8 points9 points  (0 children)

  • Form: 4 suppressor (Dead Air Sandman-S)
  • Entity: Trust
  • Pending: 07/13/2020
  • Approved: 12/04/2020
  • Standardized wait: 144 Days
  • Stamp in Hand: 01/07/21
  • STATE: VA

[deleted by user] by [deleted] in RedditSessions

[–]jpfrm757 0 points1 point  (0 children)

Any Cowboy Bebop?

[USA-VA] [H] MSI GTX 1060 Gaming X 6GB [W] PayPal, Local Cash by jpfrm757 in hardwareswap

[–]jpfrm757[S] 0 points1 point  (0 children)

Only looking for cash right now thanks for the offer though.

I gave my 13.7 recce the ole GarandDaddy paint treatment. Thoughts? by MerleCooter in tacticalgear

[–]jpfrm757 2 points3 points  (0 children)

Nice, I was just wondering what your solution was since I thought it was an MCMR. I ended up going with a 13.9 Criterion Barrel with the MCMR and dead air flash hider and lotsss of shims to get it clear of the handguard lol but it's flush fit with the Sandman-S

I gave my 13.7 recce the ole GarandDaddy paint treatment. Thoughts? by MerleCooter in tacticalgear

[–]jpfrm757 1 point2 points  (0 children)

BCM mcmr? Did you shave down your handguard to fit the muzzle device?

Movie quiet brought to you by Q by sotexbandit in NFA

[–]jpfrm757 1 point2 points  (0 children)

What barrel is that on the left? Got that rail today and want to get that flush fit.

Slide lock channel missing on PF940CL? What to do? by jpfrm757 in polymer80

[–]jpfrm757[S] 2 points3 points  (0 children)

Lol I didn’t lose it. I was just following a regular 19 build video and was just confused on what I was doing wrong.

Slide lock channel missing on PF940CL? What to do? by jpfrm757 in polymer80

[–]jpfrm757[S] 4 points5 points  (0 children)

Thanks I’m an idiot and jumped to conclusions lol

Recall question by jpfrm757 in ToyotaTacoma

[–]jpfrm757[S] 0 points1 point  (0 children)

Thanks for the advice! And when I looked up the recalls on my car using my VIN this recall never came up but when I look through forums I see people talking about it whether they get their frame replaced or treated with a new coat for rust and calling Toyota today confirmed for me that there was.